Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-01-05 16:41:14
From: james
Description: FreeBSD/amd64 on Shuttle Inc. DH410
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p1 GENERIC amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i9-10900 CPU @ 2.80GHz (2808.14-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xa0655  Family=0x6  Model=0xa5  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features2=0x40000008<PKU,SGXLC>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 68717379584 (65534 MB)
avail memory = 66606133248 (63520 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Shuttl Shuttle >
FreeBSD/SMP: Multiprocessor System Detected: 20 CPUs
FreeBSD/SMP: 1 package(s) x 10 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 1 13 5 9 7 11 15 3 17 8 10 12 16 18 6 4 14 19 2
Timecounter "TSC-low" frequency 1404069368 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <Shuttl Shuttle> on motherboard
acpi0: Power Button (fixed)
unknown: memory range not supported
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0x9d300000-0x9d303fff irq 16 at device 0.0 on pci1
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x9c000000-0x9cffffff,0xa0000000-0xafffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x9d410000-0x9d41ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x9d428000-0x9d429fff,0x9d42d000-0x9d42d0ff,0x9d42c000-0x9d42c7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x4000-0x401f mem 0x9d200000-0x9d21ffff,0x9d220000-0x9d223fff irq 16 at device 0.0 on pci2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0x9d100000-0x9d11ffff,0x9d120000-0x9d123fff irq 17 at device 0.0 on pci3
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 29.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <unknown> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Comet Lake-S HDA Controller> mem 0x9d420000-0x9d423fff,0x9d400000-0x9d40ffff irq 16 at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <ADATA SX8200PNP> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 rev3 (Front Analog)> at nid 27 and 25 on hdaa0
pcm1: <Realtek ALC662 rev3 (Internal Digital)> at nid 30 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for:ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
 usbus0 CAM ses
ada0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: <Samsung SSD 860 EVO 500GB RVT04B6Q> ACS-4 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus1 target 0
uhub0: 20 ports with 20 removable, self powered
lo0: link state changed to UP