Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-09 02:02:29
From: 610t
Description: hp TM200
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1024x768 CPU: Intel(R) Xeon(R) CPU D-1537 @ 1.70GHz (1696.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x50663 Family=0x6 Model=0x56 Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8108732416 (7733 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard Launching APs: 1 6 7 14 4 11 2 8 3 12 9 13 15 10 5 Timecounter "TSC" frequency 1696111471 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <HP ProLiant> on motherboard acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <dasp, performance counters> at device 11.1 (no driver attached) pci0: <dasp, performance counters> at device 11.2 (no driver attached) pci0: <dasp, performance counters> at device 16.1 (no driver attached) pci0: <dasp, performance counters> at device 16.6 (no driver attached) pci0: <dasp, performance counters> at device 18.1 (no driver attached) acpi_syscontainer0: <System Container> on acpi0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2020-0x203f mem 0x92d00000-0x92dfffff,0x92e04000-0x92e07fff at device 0.0 numa-domain 0 on pci2 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 8 RX queues 8 TX queues igb0: Using MSI-X interrupts with 9 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0x92c00000-0x92cfffff,0x92e00000-0x92e03fff at device 0.1 numa-domain 0 on pci2 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 8 RX queues 8 TX queues igb1: Using MSI-X interrupts with 9 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 pcib3: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci1 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci1 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci1 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci1 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci1 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci1 pci10: <ACPI PCI bus> numa-domain 0 on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci1 pci11: <ACPI PCI bus> numa-domain 0 on pcib11 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci1 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 numa-domain 0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1 pci12: <ACPI PCI bus> numa-domain 0 on pcib12 vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci12 vgapci0: Boot video device uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci12 usbus1 numa-domain 0 on uhci0 usbus1: 12Mbps Full Speed USB v1.0 pcib13: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci1 pci13: <ACPI PCI bus> numa-domain 0 on pcib13 pcib14: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci1 pci14: <ACPI PCI bus> numa-domain 0 on pcib14 ehci0: <Intel Lynx Point USB 2.0 controller USB-A> mem 0x92f01000-0x92f013ff at device 29.0 numa-domain 0 on pci1 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci0 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0x3058-0x305f,0x307c-0x307f,0x3050-0x3057,0x3078-0x307b,0x3020-0x303f mem 0x92f00000-0x92f007ff at device 31.2 numa-domain 0 on pci1 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 cpu0: <ACPI CPU> numa-domain 0 on acpi0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est7 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est8 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est9 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est10 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est11 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est12 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est13 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est14 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b3d00001300 device_attach: est15 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <HP UHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 usbus2 CAM uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST2000DL003-9VT166 CC3C> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ada0: quirks=0x1<4K> ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus0 usbus2 ugen0.2: <vendor 0x058f product 0x6254> at usbus0 uhub3 numa-domain 0 on uhub0 uhub3: <vendor 0x058f product 0x6254, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub4 numa-domain 0 on uhub1 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub4: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x05af 2.4G Dongle> at usbus0 ukbd0 numa-domain 0 on uhub3 ukbd0: <vendor 0x05af 2.4G Dongle, class 0/0, rev 2.00/3.03, addr 2> on usbus0 kbd2 at ukbd0 ioat0: <BDXDE IOAT Ch0> mem 0x92b00000-0x92b01fff at device 0.0 numa-domain 0 on pci4 ioat0: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat1: <BDXDE IOAT Ch1> mem 0x92b02000-0x92b03fff at device 0.1 numa-domain 0 on pci4 ioat1: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat2: <BDXDE IOAT Ch2> mem 0x92b04000-0x92b05fff at device 0.2 numa-domain 0 on pci4 ioat2: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat3: <BDXDE IOAT Ch3> mem 0x92b06000-0x92b07fff at device 0.3 numa-domain 0 on pci4 ioat3: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> lo0: link state changed to UP igb0: link state changed to UP ums0 numa-domain 0 on uhub3 ums0: <vendor 0x05af 2.4G Dongle, class 0/0, rev 2.00/3.03, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=1 uhid0 numa-domain 0 on uhub3 uhid0: <vendor 0x05af 2.4G Dongle, class 0/0, rev 2.00/3.03, addr 2> on usbus0