Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2021-01-14 19:41:23
From: citrin
Description: QNAP TS-251plus
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 ( llvmorg-10.0.1-0-gef32c611aa2)
VT(efifb): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (2000.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x30679  Family=0x6  Model=0x37  Stepping=9
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8135217152 (7758 MB)
Event timer "LAPIC" quality 600
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20200430/tbfadt-748)
ioapic0: MADT APIC ID 0 != hw id 1
ioapic0 <Version 2.0> irqs 0-86 on motherboard
Launching APs: 3 2 1
Timecounter "TSC" frequency 2000048280 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 10925fff vs 10926000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe020-0xe027 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <Generic SD HCI> mem 0x90923000-0x90923fff,0x90922000-0x90922fff irq 18 at device 18.0 on pci0
sdhci_pci0: 1 slot(s) allocated
xhci0: <Intel BayTrail USB 3.0 controller> mem 0x90900000-0x9090ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel BayTrail HDA Controller> mem 0x90914000-0x90917fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE9215 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0x90810000-0x908107ff irq 16 at device 0.0 on pci1
ahci0: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0x90700000-0x9077ffff,0x90780000-0x90783fff irq 18 at device 0.0 on pci3
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb000-0xb01f mem 0x90600000-0x9067ffff,0x90680000-0x90683fff irq 19 at device 0.0 on pci4
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Sleep Button> on acpi0
sdhci_acpi0: <Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller> iomem 0x90947000-0x90947fff irq 44 on acpi0
mmc0: <MMC/SD bus> on sdhci_acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xce000-0xd17ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 2.000 msec
hdacc0: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0
hdaa0: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
Trying to mount root from ufs:/dev/mirror/root [ro,noatime]...
Root mount waiting for: usbus0 CAM