Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-01-22 15:49:43
From: nia
Description: Raspberry Pi 3 (with EDK2 UEFI firmware)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.78 (GENERIC64) #0: Fri Jan 22 00:44:55 UTC 2021 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 total memory = 919 MB avail memory = 890 MB entropy: ready timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated armfdt0 (root) armfdt0: using EFI runtime services for RTC simplebus0 at armfdt0: Raspberry Pi 3 Model B Plus Rev 1.3 simplebus1 at simplebus0 simplebus2 at simplebus0 cpus0 at simplebus0 psci0 at simplebus0: PSCI 1.1 simplebus3 at simplebus0 cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu0: L1 32KB/64B*256L*2W VIPT Instruction cache cpu0: L1 32KB/64B*128L*4W PIPT Data cache cpu0: L2 512KB/64B*512L*16W PIPT Unified cache cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 bcmicu0 at simplebus1 fclock0 at simplebus2: 19200000 Hz fixed clock (osc) syscon0 at simplebus1autoconfiguration error: : couldn't get registers bcmcprman0 at simplebus1: BCM283x Clock Controller bcmaux0 at simplebus1 fclock1 at simplebus2: 480000000 Hz fixed clock (otg) bcmicu1 at simplebus1: Multiprocessor gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on local_intc irq 3 armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual) timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500 bcmgpio0 at simplebus1: GPIO controller 2835 bcmgpio0: pins 0..31 interrupting on icu irq 49 bcmgpio0: pins 32..54 interrupting on icu irq 50 gpio0 at bcmgpio0: 54 pins plcom0 at simplebus1: ARM PL011 UART plcom0: txfifo disabled plcom0: interrupting on icu irq 57 com0 at simplebus1: BCM AUX UART, 1-byte FIFO com0: console com0: interrupting on icu irq 29 fregulator0 at simplebus0: 3v3 fregulator1 at simplebus0: 5v0 /soc/thermal@7e212000 at simplebus1 not configured bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 /soc/power at simplebus1 not configured /phy at simplebus0 not configured bcmmbox0 at simplebus1: VC mailbox bcmmbox0: interrupting on icu irq 65 vcmbox0 at bcmmbox0 vchiq0 at simplebus1: BCM2835 VCHIQ bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller bcmrng0 at simplebus1: RNG bcmsdhost0 at simplebus1: SD HOST controller bcmsdhost0: interrupting on icu irq 56 sdhc0 at simplebus1: SDHC controller sdhc0: interrupting on icu irq 62 gpioleds0 at simplebus0: led0 dwctwo0 at simplebus1: USB controller dwctwo0: interrupting on icu irq 9 /soc/fb at simplebus1 not configured /soc/vcsm at simplebus1 not configured armpmu0 at simplebus0: Performance Monitor Unit /soc/gpiomem at simplebus1 not configured genfb0 at simplebus3no data for est. mode 640x480x67 : Simple Framebuffer (1920x1080 32-bpp @ 0x3e402000) genfb0: framebuffer at 0x3e402000, size 1920x1080, depth 32, stride 7680 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (default, vt100 emulation) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu2: L1 32KB/64B*256L*2W VIPT Instruction cache cpu2: L1 32KB/64B*128L*4W PIPT Data cache cpu2: L2 512KB/64B*512L*16W PIPT Unified cache cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu1: L1 32KB/64B*256L*2W VIPT Instruction cache cpu1: L1 32KB/64B*128L*4W PIPT Data cache cpu1: L2 512KB/64B*512L*16W PIPT Unified cache cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu3: L1 32KB/64B*256L*2W VIPT Instruction cache cpu3: L1 32KB/64B*128L*4W PIPT Data cache cpu3: L2 512KB/64B*512L*16W PIPT Unified cache cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add sdmmc0 at bcmsdhost0 sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks sdmmc1 at sdhc0 slot 0 dwctwo0: Core Release: 2.80a (snpsid=4f54280a) usb0 at dwctwo0: USB revision 2.0 armpmu0: interrupting on local_intc irq 9 uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered IPsec: Initialized Security Association Processing. aes: ARM NEON vpaes chacha: ARM NEON ChaCha adiantum: self-test passed aes_ccm: self-test passed blake2s: self-test passed sdmmc0: direct I/O error 5, r=6 p=0xffffc00042bb1e3c write sdmmc0: SD card status: 4-bit, C10, U1, A1 ld0 at sdmmc0: <0x03:0x5344:SC64G:0x80:0x109426e6:0x12a> ld0: 60906 MB, 7764 cyl, 255 head, 63 sec, 512 bytes/sect x 124735488 sectors ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz sdmmc1: 4-bit width, 50.000 MHz sdmmc1: SDIO function bwfm0 at sdmmc1 function 1 (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc1 function 3 not configured uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 2 uhub1: multiple transaction translators uhub1: 4 ports with 3 removable, self powered uhub2 at uhub1 port 1: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 3 uhub2: multiple transaction translators uhub2: 3 ports with 2 removable, self powered uhidev0 at uhub1 port 3 configuration 1 interface 0 uhidev0: vendor 04d9 (0x04d9) USB-HID Keyboard (0x0112), rev 1.10/1.12, addr 4, iclass 3/1 ukbd0 at uhidev0: 8 Variable keys, 6 Array codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub1 port 3 configuration 1 interface 1 uhidev1: vendor 04d9 (0x04d9) USB-HID Keyboard (0x0112), rev 1.10/1.12, addr 4, iclass 3/0 uhidev1: 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=4, output=0, feature=0 uhidev2 at uhub1 port 3 configuration 1 interface 2 uhidev2: vendor 04d9 (0x04d9) USB-HID Keyboard (0x0112), rev 1.10/1.12, addr 4, iclass 3/0 uhid2 at uhidev2: input=64, output=64, feature=0 uhub0: autoconfiguration error: illegal enable change, port 1 mue0 at uhub2 port 1 mue0: vendor 0424 (0x0424) product 7800 (0x7800), rev 2.10/3.00, addr 5 mue0: LAN7800 id 0x7800 rev 0x2 ukphy0 at mue0 phy 1: OUI 0x00800f, model 0x0013, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mue0: Ethernet address [_MAC_XXXXXXXXXX] cgd: self-test aes-xts-256 cgd: self-test aes-xts-512 cgd: self-test aes-cbc-128 cgd: self-test aes-cbc-256 cgd: self-test 3des-cbc-192 cgd: self-test blowfish-cbc-448 cgd: self-test aes-cbc-128 (encblkno8) cgd: self-tests passed WARNING: 2 errors while detecting hardware; check system log. boot device: ld0 unknown device major 0xffffffffffffffff root device (default ld0a): dump device (default ld0b): file system (default generic): root on ld0a dumps on ld0b root file system type: ffs kern.module.path=/stand/evbarm/9.99.78/modules WARNING: clock lost 15 days vchiq0: interrupting on icu irq 66 WARNING: using filesystem time WARNING: CHECK AND RESET THE DATE! vchiq: vchiq_init_state: slot_zero = 0xffffc000430e0000, is_master = 0 vchiq: local ver 8 (min 3), remote ver 8. vcaudio0 at vchiq0: auds bwfm0: Firmware file default: brcmfmac43455-sdio.bin bwfm0: Firmware file model-spec: brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin audio0 at vcaudio0: playback, capture, half duplex, independent audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured bwfm0: Found Firmware file: brcmfmac43455-sdio.bin bwfm0: NVRAM file default: brcmfmac43455-sdio.txt bwfm0: NVRAM file model-spec: brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt bwfm0: Found NVRAM file: brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt bwfm0: CHIPACTIVE bwfm0: wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 bwfm0: address [_MAC_XXXXXXXXXX] init path (default /sbin/init): init: trying /sbin/init wsdisplay0: screen 4 added (default, vt100 emulation)