Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-29 22:44:26
From: johnnyk
Description: FreeBSD/amd64 on HP HP ZBook 15 G3
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (2712.10-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33087373312 (31554 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 80D5 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 5 2 6 7 3 4 Timecounter "TSC-low" frequency 1356052010 Hz quality 1000 Cuse v0.1.36 @ /dev/cuse random: entropy device external interface 000.000020 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <HPQOEM SLIC-BPC> on motherboard acpi0: Power Button (fixed) Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20200430/dsopcode-356) ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20200430/psparse-689) acpi0: _OSC failed: AE_AML_BUFFER_LIMIT cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi1 acpi_hp0: HP event GUID detected, installing event handler pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe4000000-0xe4ffffff,0xa0000000-0xafffffff,0xb0000000-0xb1ffffff at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xe3000000-0xe3ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 acpi_video1: <ACPI video extension> on vgapci1 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xe5520000-0xe552ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms, UART> at device 22.3 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x6088-0x608f,0x6090-0x6093,0x6040-0x605f mem 0xe5548000-0xe5549fff,0xe554f000-0xe554f0ff,0xe554d000-0xe554d7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ahciem0: EM timeout device_attach: ahciem0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 pci2: <ACPI PCI bus> on pcib2 nvme0: <Generic NVMe Device> mem 0xe5100000-0xe5103fff at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci6: <ACPI PCI bus> on pcib6 nvme1: <Generic NVMe Device> mem 0xe5400000-0xe5403fff at device 0.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Sunrise Point HDA Controller> mem 0xe5544000-0xe5547fff,0xe5530000-0xe553ffff at device 31.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection> mem 0xe5500000-0xe551ffff at device 31.6 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 acpi_wmi4: <ACPI-WMI mapping> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvd0: <ADATA SX8200PNP> NVMe namespace nvd0: 976762MB (2000409264 512 byte sectors) GEOM_ELI: Device nvd0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware nvd1: <ADATA SX8200PNP> NVMe namespace nvd1: 976762MB (2000409264 512 byte sectors) GEOM_MIRROR: Device mirror/swap launched (2/2). hdacc0: <Conexant CX20724 HDA CODEC> at cad 0 on hdac0 GEOM_ELI: Device nvd1p3.eli created. hdaa0: GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware <Conexant CX20724 Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20724 (Analog 2.0+HP/2.0)> at nid 23,22 and 26,25 on hdaa0 Trying to mount root from zfs:zroot/ROOT/12.2-RELEASE []... GEOM_ELI: Device mirror/swap.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware drmn1: <drmn> on vgapci1 device_attach: drmn1 attach returned 19 iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe5200000-0xe5201fff at device 0.0 on pci3 iwm0: hw rev 0x200, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] uhub0: 26 ports with 26 removable, self powered wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP ugen0.2: <Clearly Superior Technologies. CST Laser Trackball> at usbus0 ugen0.3: <vendor 0x0430 product 0x0005> at usbus0 ukbd0 on uhub0 ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.10/2.00, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <DETNR019I210RI HP HD Camera> at usbus0 wlan0: link state changed to UP ugen0.5: <vendor 0x8087 product 0x0a2b> at usbus0 ums0 on uhub0 ums0: <Clearly Superior Technologies. CST Laser Trackball, class 0/0, rev 2.00/11.00, addr 1> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Security policy loaded: MAC/ntpd (mac_ntpd) wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP ugen0.2: <Clearly Superior Technologies. CST Laser Trackball> at usbus0 (disconnected) ums0: at uhub0, port 1, addr 1 (disconnected) ums0: detached ugen0.3: <vendor 0x0430 product 0x0005> at usbus0 (disconnected) ukbd0: at uhub0, port 4, addr 2 (disconnected) ukbd0: detached ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.3: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 6> on usbus0 kbd2 at ukbd0 ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 6> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 6> on usbus0 ugen0.3: <Logitech USB Receiver> at usbus0 (disconnected) ukbd0: at uhub0, port 5, addr 6 (disconnected) ukbd0: detached ums0: at uhub0, port 5, addr 6 (disconnected) ums0: detached uhid0: at uhub0, port 5, addr 6 (disconnected) uhid0: detached ugen0.3: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 7> on usbus0 kbd2 at ukbd0 ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 7> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 7> on usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 wlan0: link state changed to DOWN Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done All buffers synced. Uptime: 13h45m23s GEOM_ELI: Device mirror/swap.eli destroyed. GEOM_ELI: Detached mirror/swap.eli on last close. GEOM_MIRROR: Device swap: provider destroyed. GEOM_MIRROR: Device swap destroyed. GEOM_ELI: Device nvd0p3.eli destroyed. GEOM_ELI: Detached nvd0p3.eli on last close. GEOM_ELI: Device nvd1p3.eli destroyed. GEOM_ELI: Detached nvd1p3.eli on last close. ukbd0: detached ums0: detached uhid0: detached ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (2712.13-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33087373312 (31554 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 80D5 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 6 2 4 5 3 7 Timecounter "TSC-low" frequency 1356066844 Hz quality 1000 Cuse v0.1.36 @ /dev/cuse random: entropy device external interface 000.000020 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <HPQOEM SLIC-BPC> on motherboard acpi0: Power Button (fixed) Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20200430/dsopcode-356) ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20200430/psparse-689) acpi0: _OSC failed: AE_AML_BUFFER_LIMIT cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi1 acpi_hp0: HP event GUID detected, installing event handler pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe4000000-0xe4ffffff,0xa0000000-0xafffffff,0xb0000000-0xb1ffffff at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xe3000000-0xe3ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 acpi_video1: <ACPI video extension> on vgapci1 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xe5520000-0xe552ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms, UART> at device 22.3 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x6088-0x608f,0x6090-0x6093,0x6040-0x605f mem 0xe5548000-0xe5549fff,0xe554f000-0xe554f0ff,0xe554d000-0xe554d7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ahciem0: EM timeout device_attach: ahciem0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 pci2: <ACPI PCI bus> on pcib2 nvme0: <Generic NVMe Device> mem 0xe5100000-0xe5103fff at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci6: <ACPI PCI bus> on pcib6 nvme1: <Generic NVMe Device> mem 0xe5400000-0xe5403fff at device 0.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Sunrise Point HDA Controller> mem 0xe5544000-0xe5547fff,0xe5530000-0xe553ffff at device 31.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection> mem 0xe5500000-0xe551ffff at device 31.6 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 acpi_wmi4: <ACPI-WMI mapping> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvd0: <ADATA SX8200PNP> NVMe namespace nvd0: 976762MB (2000409264 512 byte sectors) GEOM_ELI: Device nvd0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware nvd1: <ADATA SX8200PNP> NVMe namespace nvd1: 976762MB (2000409264 512 byte sectors) GEOM_MIRROR: Device mirror/swap launched (2/2). hdacc0: <Conexant CX20724 HDA CODEC> at cad 0 on hdac0 GEOM_ELI: Device nvd1p3.eli created. hdaa0: GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware <Conexant CX20724 Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20724 (Analog 2.0+HP/2.0)> at nid 23,22 and 26,25 on hdaa0 Trying to mount root from zfs:zroot/ROOT/12.2-RELEASE []... GEOM_ELI: Device mirror/swap.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware drmn1: <drmn> on vgapci1 device_attach: drmn1 attach returned 19 iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe5200000-0xe5201fff at device 0.0 on pci3 iwm0: hw rev 0x200, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] uhub0: 26 ports with 26 removable, self powered ugen0.2: <Apple Inc. iPhone> at usbus0 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP ugen0.3: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <DETNR019I210RI HP HD Camera> at usbus0 ugen0.5: <vendor 0x8087 product 0x0a2b> at usbus0 wlan0: link state changed to UP ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Security policy loaded: MAC/ntpd (mac_ntpd) ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.2: <Apple Inc. iPhone> at usbus0 (disconnected) ugen0.2: <Apple Inc. iPhone> at usbus0 wlan0: link state changed to DOWN Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done All buffers synced. Uptime: 48m57s GEOM_ELI: Device mirror/swap.eli destroyed. GEOM_ELI: Detached mirror/swap.eli on last close. GEOM_MIRROR: Device swap: provider destroyed. GEOM_MIRROR: Device swap destroyed. GEOM_ELI: Device nvd0p3.eli destroyed. GEOM_ELI: Detached nvd0p3.eli on last close. GEOM_ELI: Device nvd1p3.eli destroyed. GEOM_ELI: Detached nvd1p3.eli on last close. ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1360x768 CPU: Intel(R) Core(TM) i7-6820HQ CPU @ 2.70GHz (2712.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33087373312 (31554 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 80D5 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 4 2 6 7 3 5 Timecounter "TSC-low" frequency 1356054384 Hz quality 1000 Cuse v0.1.36 @ /dev/cuse random: entropy device external interface 000.000020 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <HPQOEM SLIC-BPC> on motherboard acpi0: Power Button (fixed) Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CAP1] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20200430/dsopcode-356) ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20200430/psparse-689) acpi0: _OSC failed: AE_AML_BUFFER_LIMIT cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi1 acpi_hp0: HP event GUID detected, installing event handler pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe4000000-0xe4ffffff,0xa0000000-0xafffffff,0xb0000000-0xb1ffffff at device 0.0 on pci1 acpi_video0: <ACPI video extension> on vgapci0 vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xe3000000-0xe3ffffff,0x40000000-0x4fffffff at device 2.0 on pci0 acpi_video1: <ACPI video extension> on vgapci1 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xe5520000-0xe552ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms, UART> at device 22.3 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x6088-0x608f,0x6090-0x6093,0x6040-0x605f mem 0xe5548000-0xe5549fff,0xe554f000-0xe554f0ff,0xe554d000-0xe554d7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ahciem0: EM timeout device_attach: ahciem0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0 pci2: <ACPI PCI bus> on pcib2 nvme0: <Generic NVMe Device> mem 0xe5100000-0xe5103fff at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci6: <ACPI PCI bus> on pcib6 nvme1: <Generic NVMe Device> mem 0xe5400000-0xe5403fff at device 0.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Sunrise Point HDA Controller> mem 0xe5544000-0xe5547fff,0xe5530000-0xe553ffff at device 31.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection> mem 0xe5500000-0xe551ffff at device 31.6 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 acpi_wmi4: <ACPI-WMI mapping> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvd0: <ADATA SX8200PNP> NVMe namespace nvd0: 976762MB (2000409264 512 byte sectors) GEOM_ELI: Device nvd0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware nvd1: <ADATA SX8200PNP> NVMe namespace nvd1: 976762MB (2000409264 512 byte sectors) GEOM_MIRROR: Device mirror/swap launched (2/2). hdacc0: <Conexant CX20724 HDA CODEC> at cad 0 on hdac0 GEOM_ELI: Device nvd1p3.eli created. hdaa0: GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware <Conexant CX20724 Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20724 (Analog 2.0+HP/2.0)> at nid 23,22 and 26,25 on hdaa0 Trying to mount root from zfs:zroot/ROOT/12.2-RELEASE []... GEOM_ELI: Device mirror/swap.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware drmn1: <drmn> on vgapci1 device_attach: drmn1 attach returned 19 iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe5200000-0xe5201fff at device 0.0 on pci3 iwm0: hw rev 0x200, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] uhub0: 26 ports with 26 removable, self powered wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP ugen0.2: <Apple Inc. iPhone> at usbus0 ugen0.3: <Logitech USB Receiver> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <DETNR019I210RI HP HD Camera> at usbus0 ugen0.5: <vendor 0x8087 product 0x0a2b> at usbus0 wlan0: link state changed to UP ums0 on uhub0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0 on uhub0 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.10, addr 2> on usbus0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled