Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-30 16:47:32
From: tech-lists
Description: raspberry pi 4B verbose boot FreeBSD 14.0-CURRENT main-n244527-d1de5698dfe
Loading kernel...
/boot/kernel/kernel text=0x2a8 text=0x8b8150 text=0x1ec05c data=0x1a89d8 data=0x0+0x389000 syms=[0x8+0x11e710+0x8+0x143c92]
Loading configured modules...
/boot/kernel/umodem.ko text=0x1c00 text=0xfe0 data=0x618+0x8 syms=[0x8+0xe40+0x8+0xa8c]
/boot/kernel/accf_http.ko text=0x862 text=0x62c data=0x2e0 syms=[0x8+0x5d0+0x8+0x3f2]
/boot/kernel/cc_htcp.ko text=0xdc6 text=0x798 data=0x498+0x4 syms=[0x8+0x8e8+0x8+0x5fb]
/boot/kernel/accf_data.ko text=0x531 text=0x40 data=0x1b0 syms=[0x8+0x408+0x8+0x275]
/etc/hostid size=0x25
/boot/kernel/accf_dns.ko text=0x590 text=0xf4 data=0x1b0 syms=[0x8+0x420+0x8+0x284]
/boot/entropy size=0x1000
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x7ef2000.
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Type Physical Virtual #Pages Attr
Reserved 000000000000 0 00000002 WB
ConventionalMemory 000000002000 2000 00007ef0 WB
ACPIReclaimMemory 000007ef2000 7ef2000 0000001c WB
ConventionalMemory 000007f0e000 7f0e000 00029f78 WB
LoaderData 000031e86000 31e86000 00008001 WB
LoaderCode 000039e87000 39e87000 000000a9 WB
Reserved 000039f30000 39f30000 00000007 WB
BootServicesData 000039f37000 39f37000 00000001 WB
RuntimeServicesData 000039f38000 39f38000 00000001 WB RUNTIME
BootServicesData 000039f39000 39f39000 00000002 WB
Reserved 000039f3b000 39f3b000 00000001 WB
BootServicesData 000039f3c000 39f3c000 00000002 WB
RuntimeServicesData 000039f3e000 39f3e000 00000002 WB RUNTIME
Reserved 000039f40000 39f40000 00000001 WB
BootServicesData 000039f41000 39f41000 00000001 WB
Reserved 000039f42000 39f42000 00000001 WB
BootServicesData 000039f43000 39f43000 00000002 WB
Reserved 000039f45000 39f45000 00000001 WB
LoaderData 000039f46000 39f46000 0000140a WB
RuntimeServicesCode 00003b350000 3b350000 00000010 WB RUNTIME
LoaderData 00003b360000 3b360000 000000a0 WB
BootServicesData 000040000000 40000000 000bc000 WB
MemoryMappedIO 0000fe100000 fe100000 00000001 RUNTIME
BootServicesData 000100000000 100000000 00100000 WB
Physical memory chunk(s):
0x00002000 - 0x07ef1fff, 126 MB ( 32496 pages)
0x07f0e000 - 0x39f2ffff, 800 MB ( 204834 pages)
0x39f37000 - 0x39f3afff, 0 MB ( 4 pages)
0x39f3c000 - 0x39f3ffff, 0 MB ( 4 pages)
0x39f41000 - 0x39f41fff, 0 MB ( 1 pages)
0x39f43000 - 0x39f44fff, 0 MB ( 2 pages)
0x39f46000 - 0x3b34ffff, 20 MB ( 5130 pages)
0x3b360000 - 0x3b3fffff, 0 MB ( 160 pages)
0x40000000 - 0xfbffffff, 3008 MB ( 770048 pages)
0x100000000 - 0x1ffffffff, 4096 MB (1048576 pages)
Excluded memory regions:
0x00000000 - 0x00001fff, 0 MB ( 2 pages) NoAlloc
0x07ef2000 - 0x07f0dfff, 0 MB ( 28 pages) NoAlloc
0x32000000 - 0x33523fff, 21 MB ( 5412 pages) NoAlloc
0x39f30000 - 0x39f36fff, 0 MB ( 7 pages) NoAlloc
0x39f38000 - 0x39f38fff, 0 MB ( 1 pages) NoAlloc
0x39f3b000 - 0x39f3bfff, 0 MB ( 1 pages) NoAlloc
0x39f3e000 - 0x39f40fff, 0 MB ( 3 pages) NoAlloc
0x39f42000 - 0x39f42fff, 0 MB ( 1 pages) NoAlloc
0x39f45000 - 0x39f45fff, 0 MB ( 1 pages) NoAlloc
0x3b350000 - 0x3b35ffff, 0 MB ( 16 pages) NoAlloc
0xfe100000 - 0xfe100fff, 0 MB ( 1 pages) NoAlloc
Found 4 CPUs in the device tree
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n244527-d1de5698dfe: Sat Jan 30 13:48:30 UTC 2021
root@generic:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT: init without driver.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff0000012f4000.
Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff0000012fd1f0.
Preloaded elf module "/boot/kernel/accf_http.ko" at 0xffff0000012fd9c8.
Preloaded elf module "/boot/kernel/cc_htcp.ko" at 0xffff0000012fe068.
Preloaded elf module "/boot/kernel/accf_data.ko" at 0xffff0000012fe800.
Preloaded hostuuid "/etc/hostid" at 0xffff0000012feda0.
Preloaded elf module "/boot/kernel/accf_dns.ko" at 0xffff0000012fedf0.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffff0000012ff390.
module firmware already present!
KLD file umodem.ko is missing dependencies
real memory = 8442900480 (8051 MB)
Physical memory chunk(s):
0x00000000002000 - 0x00000007ef1fff, 133103616 bytes (32496 pages)
0x00000007f0e000 - 0x00000031ffffff, 705634304 bytes (172274 pages)
0x00000033524000 - 0x00000039f2ffff, 111198208 bytes (27148 pages)
0x00000039f37000 - 0x00000039f37fff, 4096 bytes (1 pages)
0x00000039f39000 - 0x00000039f3afff, 8192 bytes (2 pages)
0x00000039f3c000 - 0x00000039f3dfff, 8192 bytes (2 pages)
0x00000039f41000 - 0x00000039f41fff, 4096 bytes (1 pages)
0x00000039f43000 - 0x00000039f44fff, 8192 bytes (2 pages)
0x00000039f46000 - 0x0000003b34ffff, 21012480 bytes (5130 pages)
0x0000003b360000 - 0x0000003b3fffff, 655360 bytes (160 pages)
0x00000040000000 - 0x000000fbffffff, 3154116608 bytes (770048 pages)
0x00000100000000 - 0x000001f3849fff, 4085555200 bytes (997450 pages)
avail memory = 8210644992 (7830 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: read 4096 bytes from preloaded cache
random: unblocking device.
VIMAGE (virtualized network stack) enabled
hostuuid: using 30303031-3030-3030-3035-626435383935
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'tegra210_xusb_fw' version 0: 132608 bytes loaded at 0xffff0000009a88c0
MAP 39f38000 mode 2 pages 1
MAP 39f3e000 mode 2 pages 2
MAP 3b350000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
crypto: <crypto core>
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000
Processing 2 pin-config node(s) in pinctrl-0 for spi@7e204000
gpio0: set pin 9 to func 4
gpio0: set pin 10 to func 4
gpio0: set pin 11 to func 4
gpio0: set pin 8 to func 1
gpio0: set pin 7 to func 1
Processing 1 pin-config node(s) in pinctrl-0 for pwm@7e20c000
gpio0: set pin 18 to func 2
Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000
Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000
gpio0: set pin 48 to func 7, pull 0
gpio0: set pin 49 to func 7, pull 2
gpio0: set pin 50 to func 7, pull 2
gpio0: set pin 51 to func 7, pull 2
gpio0: set pin 52 to func 7, pull 2
gpio0: set pin 53 to func 7, pull 2
Processing 1 pin-config node(s) in pinctrl-0 for audio
gpio0: set pin 40 to func 4
gpio0: set pin 41 to func 4
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
Checking root against raspberrypi,model-b
Checking root against brcm,bcm2835
Checking root against brcm,bcm2709
Checking root against brcm,bcm2836
Checking root against brcm,bcm2837
Checking root against brcm,bcm2711
gpiobus1: <GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
efirtc0: cannot read EFI realtime clock, error 78
ofwbus0: <framebuffer> disabled compat simple-framebuffer (no driver attached)
simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 8 disabled compat brcm,bcm2835-txp (no driver attached)
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2711-cprman (no driver attached)
simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 20 compat brcm,bcm2838-rng200 (no driver attached)
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 25 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
spibus0: <SPI bus> on spi0
simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e2051ff irq 27 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 28 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 29 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 30 compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached)
simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 31 disabled compat brcm,bcm2835-aux-uart (no driver attached)
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 32 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 33 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 34 disabled compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 35 disabled compat brcm,bcm2835-dsi1 (no driver attached)
simplebus0: <csi@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 36 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <csi@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 37 disabled compat brcm,bcm2835-unicam (no driver attached)
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 39 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 40 disabled compat brcm,bcm2835-vec (no driver attached)
simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 41 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached)
simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 42,43 disabled compat brcm,bcm2835-hdmi (no driver attached)
simplebus0: <usb@7e980000> mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 44,45 disabled compat brcm,bcm2708-usb (no driver attached)
simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached)
simplebus0: <local_intc@40000000> mem 0x40000000-0x400000ff compat brcm,bcm2836-l1-intc (no driver attached)
simplebus0: <thermal@7d5d2200> mem 0x7d5d2200-0x7d5d222b irq 47 compat brcm,avs-tmon-bcm2838 (no driver attached)
simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 48 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 49 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 50 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 51 disabled compat brcm,bcm2835-pl011 (no driver attached)
simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 52 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 53 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 54 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 55 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 56 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 57 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 58 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 59 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 disabled compat brcm,bcm2835-pwm (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
sdhci_bcm0: SDHCI frequency: 100MHz
sdhci_bcm0-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO embedded
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0xf6fb8c00 | Version: 0x00001002
sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000002
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525
sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0: vqmmc-supply regulator found
sdhci_bcm0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_bcm0
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
sdhci_bcm1: SDHCI frequency: 250MHz
sdhci_bcm1-slot0: 250MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000000
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Card inserted
mmc1: <MMC/SD bus> on sdhci_bcm1
simplebus0: <mmcnr@7e300000> mem 0x7e300000-0x7e3000ff irq 62 disabled compat brcm,bcm2835-mmc (no driver attached)
simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 63 disabled compat raspberrypi,rpi-firmware-kms (no driver attached)
simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 64 disabled compat brcm,bcm2835-smi (no driver attached)
simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
gpioc1: <GPIO controller> on gpio1
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: changing fb bpp from 0 to 24
mbox0: mbox response error
fb0: bcm2835_mbox_fb_init failed, err=5
device_attach: fb0 attach returned 6
simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
simplebus0: <audio> compat brcm,bcm2835-audio (no driver attached)
simplebus0: <virtgpio> compat brcm,bcm2835-virtgpio (no driver attached)
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
ofwbus0: no default resources for rid = 4, type = 1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
simplebus1: <v3d@7ec04000> mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 65 disabled compat brcm,2711-v3d (no driver attached)
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
pcib0: parsing FDT for ECAM0:
pcib0: PCI addr: 0xf8000000, CPU addr: 0x600000000, Size: 0x4000000
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: Bus is not cache-coherent
pcib0: hardware identifies as revision 0x304.
pcib0: note: reported link speed is 5.0 GT/s.
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x14e4, dev=0x2711, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
secbus=1, subbus=1
pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
pcib0: rman_reserve_resource: start=0xf8000000, end=0xf80fffff, count=0x100000
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: memory decode 0xf8000000-0xf80fffff
pci1: <PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x1106, dev=0x3483, revid=0x01
domain=0, bus=1, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type Memory, range 64, base 0, size 12, memory disabled
pcib1: slot 0 INTA is routed to irq 78
bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 78 at device 0.0 on pci1
bcm_xhci0: note: xhci firmware not found.
bcm_xhci0: note: installing xhci firmware.
bcm_xhci0: note: xhci firmware detected; firmware is revision 138a1.
pcib1: allocated memory range (0xf8000000-0xf8000fff) for rid 10 of bcm_xhci0
bcm_xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000
bcm_xhci0: 32 bytes context size, 64-bit DMA
bcm_xhci0: attempting to allocate 1 MSI vectors (4 supported)
bcm_xhci0: using IRQ 79 for MSI
bcm_xhci0: MSI enabled
usbus0 on bcm_xhci0
bcm_xhci0: usbpf: Attached
bcm_xhci0: note: switched to 32-bit DMA.
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x18c086, model 0x000a, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
genet0: bpf attached
genet0: Ethernet address: [_MAC_XXXXXXXXXX]
simplebus2: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 70,71,72,73 compat brcm,bcm2838-dma (no driver attached)
simplebus2: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 74 disabled compat generic-xhci (no driver attached)
simplebus2: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat raspberrypi,rpivid-hevc-decoder (no driver attached)
simplebus2: <rpivid-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq 75 compat raspberrypi,rpivid-local-intc (no driver attached)
simplebus2: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat raspberrypi,rpivid-h264-decoder (no driver attached)
simplebus2: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat raspberrypi,rpivid-vp9-decoder (no driver attached)
simplebus2: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 76 compat brcm,bcm2838-vchiq (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
armv8crypto0: CPU lacks AES instructionsFound SMCCC version 1.0
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
usbus0: 5.0Gbps Super Speed USB v3.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
sdhci_bcm0-slot0: Divider 125 for freq 400000 (base 100000000)
mmc0: Probing bus
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x40ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
mmc0: New card detected (CID 035344534c31364780ed3b278f010b00)
mmc0: New card detected (CSD 400e00325b59000076b27f800a404000)
mmc0: Card at relative address 0xaaaa added:
mmc0: card: SDHC SL16G 8.0 SN ED3B278F MFG 11/2016 by 3 SD
mmc0: quirks: 0
mmc0: bus: 4bit, 50MHz (high speed timing)
mmc0: memory: 31116288 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
sdhci_bcm0-slot0: Divider 1 for freq 50000000 (base 100000000)
mmcsd0: 16GB <SDHC SL16G 8.0 SN ED3B278F MFG 11/2016 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
sdhci_bcm1-slot0: Divider 313 for freq 399361 (base 250000000)
mmc1: Probing bus
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits high speed timing
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
mmc1: SD probe: failed
mmc1: MMC probe: failed
mmc1: Current OCR: 0x00000000
mmc1: No compatible cards found on bus
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
bcm2835_cpufreq0: Boot settings:
bcm2835_cpufreq0: current ARM 600MHz, Core 200MHz, SDRAM -1094MHz, Turbo OFF
bcm2835_cpufreq0: max/min ARM 2000/600MHz, Core 500/200MHz, SDRAM -1094/-1094MHz
bcm2835_cpufreq0: current Core 955mV, SDRAM_C 1100mV, SDRAM_I 1100mV, SDRAM_P 1100mV
bcm2835_cpufreq0: max/min Core 1030/880mV, SDRAM_C 1100/1100mV, SDRAM_I 1100/1100mV, SDRAM_P 1100/1100mV
bcm2835_cpufreq0: Temperature 48.0C
uhub0: 5 ports with 4 removable, self powered
Release APs...Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
KTLS: Initialized 4 threads
regulator: shutting down unused regulators
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-ED3B278F, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-ED3B278F, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-ED3B278Fs2, BSD) is not aligned on 4194304 bytes
Root mount waiting for: usbus0 CAM
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
Root mount waiting for: usbus0 CAM
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0 CAM
ugen0.3: <ADATA HD710> at usbus0
umass0 on uhub0
umass0: <ADATA HD710, class 0/0, rev 3.00/1.00, addr 2> on usbus0
umass0:0:0: Attached to scbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
GEOM: new disk da0
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <ADATA HD710 0> Fixed Direct Access SPC-4 SCSI device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
pass0: 400.000MB/s transfers
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <ADATA HD710 0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 400.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
start_init: trying /sbin/init
Setting hostuuid: 30303031-3030-3030-3035-626435383935.
Setting hostid: 0xfab8d03b.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 3414793 free (3161 frags, 426454 blocks, 0.1% fragmentation)
GEOM_PART: partition 1 on (diskid/DISK-ED3B278F, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-ED3B278F, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-ED3B278Fs2, BSD) is not aligned on 4194304 bytes
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.32/mach/CORE
Setting hostname: generic.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
genet0: link state changed to DOWN
Starting Network: lo0 genet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether [_MAC_XXXXXXXXXX]
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
genet0: link state changed to UP
Starting dhclient.
DHCPREQUEST on genet0 to[_IP_XXXXXXXXXX] port 67
DHCPACK from[_IP_XXXXXX]
bound to[_IP_XXXXXXXX] -- renewal in 43200 seconds.
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating /var/run/os-release done.
Creating and/or trimming log files.
Clearing /tmp (X related).
Updating motd:.
Starting syslogd.
Setting date via ntp.
30 Jan 16:38:57 ntpdate[1013]: step time server[_IP_XXXXXXXXX] offset +64.119708 sec
Mounting late filesystems:.
Security policy loaded: MAC/ntpd (mac_ntpd)
Starting ntpd.
Starting powerd.
Starting cron.
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Sat Jan 30 16:38:58 UTC
FreeBSD/arm64 (generic) (ttyu0)
login: