Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-02-08 05:13:07
From: Bdragon
Description: PowerMac G5 13.0-STABLE (post -BETA1)
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #1 stable/13-n244481-6bf9668d9d0-dirty: Sun Feb  7 15:13:20 CST 2021
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/powerpc.powerpc64/sys/GENERIC64 powerpc
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-rc2-0-g43ff75f2c3f)
VT(ofwfb): resolution 1680x1050
cpu0: IBM PowerPC 970 revision 2.2, 1311.22 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN>
real memory  = 2107727872 (2010 MB)
avail memory = 1978548224 (1886 MB)
random: unblocking device.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
000.000033 [4350] netmap_init               netmap: loaded module
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree> on nexus0
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 179
pcib0: <Apple U3 Host-AGP bridge> mem 0xf0000000-0xf1ffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib1: 4 HT IRQs on device 1.0
pcib1: 4 HT IRQs on device 2.0
pcib1: 86 HT IRQs on device 3.0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1
pci2: <OFW PCI bus> numa-domain 0 on pcib2
pcib3: <OFW PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1
pci3: <OFW PCI bus> numa-domain 0 on pcib3
pcib4: <OFW PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1
pci4: <OFW PCI bus> numa-domain 0 on pcib4
macio0: <K2 KeyLargo I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 numa-domain 0 on pci4
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
pcib5: <OFW PCI-PCI bridge> at device 4.0 numa-domain 0 on pci1
pci5: <OFW PCI bus> numa-domain 0 on pcib5
pcib6: <OFW PCI-PCI bridge> at device 5.0 numa-domain 0 on pci1
pci6: <OFW PCI bus> numa-domain 0 on pcib6
pcib7: <OFW PCI-PCI bridge> at device 6.0 numa-domain 0 on pci1
pci7: <OFW PCI bus> numa-domain 0 on pcib7
pcib8: <OFW PCI-PCI bridge> at device 7.0 numa-domain 0 on pci1
pci8: <OFW PCI bus> numa-domain 0 on pcib8
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 33554457 on macio0
pmu0: registered as a time-of-day clock, resolution 0.001000s
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 33554488 on unin0
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 494, bank1 generation 493
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xca
ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0
max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0
max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0
iicbus0: <unknown card> at addr 0xd2
fcu0: <Apple Fan Control Unit> at addr 0x15e on iicbus0
iicbus0: <unknown card> at addr 0x30
ad74170: <Supply-Monitor AD7417> at addr 0x58 on iicbus0
ad74170: 5 sensors detected.
iicbus0: <unknown card> at addr 0xa0
iicbus0: <unknown card> at addr 0x1c0
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 33554480 at device 16.0 numa-domain 0 on pci0
vgapci0: Boot video device
agp0: <Apple U3 AGP Bridge> numa-domain 0 on hostb0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 13.0.
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 33554454,33554437,33554438,33554455,33554439,33554440 on macio0
uart0: <z8530, channel A> numa-domain 0 on scc0
uart1: <z8530, channel B> numa-domain 0 on scc0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 33554458 on macio0
iicbus1: <OFW I2C bus> numa-domain 0 on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0x1c0
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 33554462,33554433,33554434 on macio0
ohci0: <OHCI (generic) USB controller> mem 0x80081000-0x80081fff irq 33554459 at device 8.0 numa-domain 0 on pci4
usbus0 numa-domain 0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0x80080000-0x80080fff irq 33554460 at device 9.0 numa-domain 0 on pci4
usbus1 numa-domain 0 on ohci1
ohci2: <NEC uPD 9210 USB controller> mem 0x80102000-0x80102fff irq 33554495 at device 11.0 numa-domain 0 on pci5
usbus2 numa-domain 0 on ohci2
ohci3: <NEC uPD 9210 USB controller> mem 0x80101000-0x80101fff irq 33554495 at device 11.1 numa-domain 0 on pci5
usbus3 numa-domain 0 on ohci3
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80100000-0x801000ff irq 33554495 at device 11.2 numa-domain 0 on pci5
usbus4: EHCI version 1.0
usbus4 numa-domain 0 on ehci0
ata0: <K2 Kauai ATA Controller> mem 0x80204000-0x80207fff irq 33554471,33554470 at device 13.0 numa-domain 0 on pci6
fwohci0: <1394 Open Host Controller Interface> mem 0x80200000-0x80200fff irq 33554472 at device 14.0 numa-domain 0 on pci6
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:80:56
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> numa-domain 0 on fwohci0
fwe0: <Ethernet over FireWire> numa-domain 0 on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> numa-domain 0 on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple K2 GMAC Ethernet> mem 0x80400000-0x805fffff irq 33554473 at device 15.0 numa-domain 0 on pci7
miibus0: <MII bus> numa-domain 0 on gem0
brgphy0: <BCM54K2 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: [_MAC_XXXXXXXXXX]
atapci0: <ServerWorks K2 SATA150 controller> mem 0x80600000-0x80601fff irq 33554432 at device 12.0 numa-domain 0 on pci8
pcib1: failed to reserve resource for pcib8
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
atapci1: <ServerWorks K2 SATA150 controller> at device 12.1 numa-domain 0 on pci8
pcib1: failed to reserve resource for pcib8
atapci1: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
atapci1: unable to map interrupt
device_attach: atapci1 attach returned 6
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 33333333 Hz quality 1000
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
fwohci0: too many cycles lost, no cycle master present?
max66900: 2 sensors detected.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
max66901: 2 sensors detected.
ugen1.1: <Apple OHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus1
uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Apple OHCI root HUB> at usbus0
uhub1 numa-domain 0 on usbus0
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <NEC OHCI root HUB> at usbus2
uhub2 numa-domain 0 on usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <NEC OHCI root HUB> at usbus3
uhub3 numa-domain 0 on usbus3
uhub3: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <NEC EHCI root HUB> at usbus4
uhub4 numa-domain 0 on usbus4
uhub4: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 3 ports with 3 removable, self powered
fcu0: FCU initialized, RPM shift: 3
fcu0: 7 fans detected!
uhub3: 2 ports with 2 removable, self powered
fcu0: RPM Fan not active ID: 5
uhub4: 5 ports with 5 removable, self powered
Trying to mount root from ufs:/dev/ada1s3 [rw]...
Root mount waiting for: usbus4 CAM
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD2500SD-01KCC0 08.02D08> ATA-6 SATA 1.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors)
ada1 at ata3 bus 0 scbus3 target 0 lun 0
ada1: <Samsung SSD 850 EVO 500GB EMT02B6Q> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 512bytes)
ada1: 476940MB (976773168 512 byte sectors)
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <SONY DVD RW DW-U10A A43h> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXX]
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
mountroot: waiting for device /dev/ada1s3...
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
ugen2.2: <Primax Electronics Apple Optical USB Mouse> at usbus2
ums0 numa-domain 0 on uhub2
ums0: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev 1.10/1.10, addr 2> on usbus2
ums0: 4 buttons and [XYZW] coordinates ID=0
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
ugen3.2: <Razer Razer BlackWidow Ultimate> at usbus3
ukbd0 numa-domain 0 on uhub3
ukbd0: <Razer Razer BlackWidow Ultimate, class 0/0, rev 2.00/2.00, addr 2> on usbus3
kbd1 at ukbd0
uhid0 numa-domain 0 on uhub3
uhid0: <Razer Razer BlackWidow Ultimate, class 0/0, rev 2.00/2.00, addr 2> on usbus3
ums1 numa-domain 0 on uhub3
ums1: <Razer Razer BlackWidow Ultimate, class 0/0, rev 2.00/2.00, addr 2> on usbus3
ums1: 3 buttons and [XYZ] coordinates ID=0
lo0: link state changed to UP
gem0: link state changed to DOWN
gem0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)