Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-02-10 15:24:55
From: iNeo
Description: FreeBSD/amd64 on Hewlett-Packard HP xw4400 Workstation
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p3 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.13-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 8590983168 (8193 MB) avail memory = 8271368192 (7888 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <COMPAQ GLENWOOD> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0: MADT APIC ID 1 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1200066403 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: hpet0 attach returned 12 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xe4000000-0xe4ffffff,0xc0000000-0xdfffffff,0xe2000000-0xe3ffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <Intel 82801G HDA Controller> mem 0xe0500000-0xe0503fff irq 21 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xe0400000-0xe040ffff irq 17 at device 0.0 on pci4 bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2000-0x201f irq 20 at device 29.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2020-0x203f irq 18 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 21 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2060-0x207f irq 22 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0504000-0xe05043ff irq 20 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20a0-0x20af irq 17 at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH7 AHCI SATA controller> port 0x20d0-0x20d7,0x20e8-0x20eb,0x20d8-0x20df,0x20ec-0x20ef,0x20b0-0x20bf mem 0xe0504400-0xe05047ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 orm0: <ISA Option ROMs> at iomem 0xcd800-0xd1fff,0xe7800-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est1 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 21,27 and 24,25,26,28,20 on hdaa0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel EHCI root HUB> at usbus4 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD15EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1430799MB (2930277168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <WDC WD15EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1430799MB (2930277168 512 byte sectors) ada1: quirks=0x1<4K> cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVD+-RW GSA-H21L 1.04> Removable CD-ROM SCSI device cd0: 44.400MB/s transfers (UDMA3, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub0: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 Root mount waiting for: usbus4 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 uhub1: 8 ports with 8 removable, self powered bridge0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP bge0: link state changed to DOWN bge0: promiscuous mode enabled bridge0: link state changed to DOWN bge0: link state changed to UP bridge0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done All buffers synced. Uptime: 4h21m58s ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p3 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.13-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 8590983168 (8193 MB) avail memory = 8271368192 (7888 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <COMPAQ GLENWOOD> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0: MADT APIC ID 1 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1200067146 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-WKS> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: hpet0 attach returned 12 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xe4000000-0xe4ffffff,0xc0000000-0xdfffffff,0xe2000000-0xe3ffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <Intel 82801G HDA Controller> mem 0xe0500000-0xe0503fff irq 21 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20200430/nsarguments-309) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20200430/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20200430/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20200430/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xe0400000-0xe040ffff irq 17 at device 0.0 on pci4 bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2000-0x201f irq 20 at device 29.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2020-0x203f irq 18 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 21 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2060-0x207f irq 22 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0504000-0xe05043ff irq 20 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20a0-0x20af irq 17 at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH7 AHCI SATA controller> port 0x20d0-0x20d7,0x20e8-0x20eb,0x20d8-0x20df,0x20ec-0x20ef,0x20b0-0x20bf mem 0xe0504400-0xe05047ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 orm0: <ISA Option ROMs> at iomem 0xcd800-0xd1fff,0xe7800-0xeffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est1 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 21,27 and 24,25,26,28,20 on hdaa0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen4.1: <Intel EHCI root HUB> at usbus4 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 CAM ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD15EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1430799MB (2930277168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <WDC WD15EARS-00MVWB0 51.0AB51> ATA8-ACS SATA 2.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1430799MB (2930277168 512 byte sectors) ada1: quirks=0x1<4K> cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVD+-RW GSA-H21L 1.04> Removable CD-ROM SCSI device cd0: 44.400MB/s transfers (UDMA3, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 Root mount waiting for: usbus4 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 uhub3: 8 ports with 8 removable, self powered bridge0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP bge0: link state changed to DOWN bge0: promiscuous mode enabled bridge0: link state changed to DOWN bge0: link state changed to UP bridge0: link state changed to UP