Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-02-17 23:09:59
From: tuexen
Description: Parallels 16.6.2
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #1 main-n244885-955b6109bb3: Wed Feb 17 22:22:48 CET 2021
    root@freebsd13:/usr/obj/usr/home/tuexen/freebsd-src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
module firmware already present!
real memory  = 4292018176 (4093 MB)
avail memory = 4158353408 (3965 MB)
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
random: unblocking device.
random: entropy device external interface
MAP 17c090000 mode 2 pages 192
MAP 17f690000 mode 2 pages 400
MAP 17f820000 mode 2 pages 592
MAP 200000 mode 0 pages 78
MAP 2120000 mode 0 pages 1
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x2010000-0x2010fff,0x2000000-0x2002fff on ofwbus0
gic0: pn 0x0, arch 0x2, rev 0x0, implementer 0x0 irqs 128
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
uart0: <PrimeCell UART (PL011)> mem 0x2110000-0x2110fff irq 4 on ofwbus0
uart0: debug port (115200,n,8,1)
ahci0: <AHCI SATA controller> mem 0x2140000-0x2141fff irq 5 on ofwbus0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ehci0: <Generic EHCI Controller> mem 0x2150000-0x2150fff irq 6 on ofwbus0
usbus0: EHCI version 1.0
usbus0 on ehci0
xhci0: <Generic USB 3.0 controller> mem 0x2160000-0x2160fff irq 7 on ofwbus0
xhci0: 32 bytes context size, 32-bit DMA
usbus1 on xhci0
virtio_mmio0: <VirtIO MMIO adapter> mem 0x21c0000-0x21c3fff irq 13 on ofwbus0
vtnet0: <VirtIO Networking Adapter> on virtio_mmio0
vtnet0: Ethernet address: [_MAC_XXXXXXXXXX]
cryptosoft0: <software crypto>
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
CPU  0: ARM Unknown Processor r0p0 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <TLBI-OSR,CondM-8.5,FHM,DP,SHA3,RDM,Atomic,CRC32,SHA2+SHA512,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <PredInv,SB,FRINTTS,GPI,RCPC-8.4,FCMA,JSCVT,Unknown API(2),DCCVADP>
         Processor Features 0 = <CSV3,CSV2,PSTATE.DIT,RASv1,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0>
         Processor Features 1 = <PSTATE.SSBS MSR>
      Memory Model Features 0 = <TGran4,TGran16,8bit ASID,64GB PA,0x100000000000>
      Memory Model Features 1 = <XNX,SpecSEI,PAN+ATS1E1,LO,HPD+TTPBHA,8bit VMID>
      Memory Model Features 2 = <E0PD,TTL,IDS,AT,32bit CCIDX,48bit VA,IESB,UAO,CnP>
             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
KTLS: Initialized 1 threads
WARNING: WITNESS option enabled, expect reduced performance.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic EHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Root mount waiting for: CAM usbus0 usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <FreeBSD 13.0-0 SSD F.BZ49TW> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 65536MB (134217728 512 byte sectors)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: < Virtual DVD-ROM R103> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBE] 31415B265
cd0: 150.000MB/s transfers (SATA 1.x, UDMA1, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 14 ports with 14 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <Parallels Virtual Mouse> at usbus1
Root mount waiting for: usbus0 usbus1
ugen1.3: <Parallels Virtual Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Virtual Keyboard Interface> on usbus1
kbd1 at ukbd0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub1: 15 ports with 15 removable, self powered
mountroot: waiting for device /dev/ada0p2...
lo0: link state changed to UP
vtnet0: link state changed to UP
uhid0 on uhub0
uhid0: <Absolute Coordinate Interface> on usbus1
uhid1 on uhub0
uhid1: <Relative Coordinate Interface> on usbus1