Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-02-28 20:16:52
From: ronald
Description: FreeBSD-13.0-BETA4/arm64 GENERIC-MMCCAM on raspberrypi rpi 3Bplus
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-BETA4 #0 releng/13.0-n244594-310ae6a0df39: Sun Feb 28 15:27:00 CET 2021
builder@rpi3:/data/src/obj/data/src/freebsd-13.0/arm64.aarch64/sys/GENERIC-MMCCAM arm64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 656x416
module firmware already present!
real memory = 993824768 (947 MB)
avail memory = 947802112 (903 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 39f35000 mode 2 pages 1
MAP 39f39000 mode 2 pages 3
MAP 39f3d000 mode 2 pages 4
MAP 3b350000 mode 2 pages 16
MAP 3f100000 mode 0 pages 1
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
usbus1 on bcm283x_dwcotg0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0
gpioc1: <GPIO controller> on gpio1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
armv8crypto0: CPU lacks AES instructionsTimecounters tick every 1.000 msec
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
(noperiph:sdhci_slot0:0:-1:ffffffff): xpt_async(AC_PATH_REGISTERED)
usbus1: 480Mbps High Speed USB v2.0
(noperiph:sdhci_slot0:0:-1:ffffffff): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot0:0:0:0): XPT_SCAN_{BUS,TGT,LUN}
(noperiph:sdhci_slot0:0:0:0): ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Set up the mmcprobe device...
(mmcprobe0:sdhci_slot0:0:0:0): Periph created
(mmcprobe0:sdhci_slot0:0:0:0): Probe started
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_INVALID to PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_IDENTIFY
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Trying to mount root from ufs:/dev/gpt/ssdrootfs []...
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Root mount waiting for: Instruction Set Attributes 0 = <CRC32>
usbus1 CAM Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
(mmcprobe0:sdhci_slot0:0:0:0): Send first XPT_MMC_IO
(mmcprobe0:sdhci_slot0:0:0:0): done with PROBE_RESET
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_RESET to PROBE_SEND_IF_COND
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SEND_IF_COND
(mmcprobe0:sdhci_slot0:0:0:0): SD 2.0 interface conditions: OK
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_IF_COND to PROBE_SDIO_RESET
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_RESET
(mmcprobe0:sdhci_slot0:0:0:0): SDIO_RESET: error 1, CCCR CTL register: 00000000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_RESET to PROBE_SDIO_INIT
uhub0: 1 port with 1 removable, self powered
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_INIT
(mmcprobe0:sdhci_slot0:0:0:0): SDIO_INIT: error 1, 00000000 00000000 00000000 00000000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_INIT to PROBE_SEND_APP_OP_COND
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Card OCR: 00ff8000
(mmcprobe0:sdhci_slot0:0:0:0): -> sending OCR to card
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Card not ready: 00ff8000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_APP_OP_COND to PROBE_SEND_APP_OP_COND
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Card OCR: c1ff8000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_APP_OP_COND to PROBE_GET_CID
(mmcprobe0:sdhci_slot0:0:0:0): Card is SDHC
(mmcprobe0:sdhci_slot0:0:0:0): Card supports 1.8V signaling
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): CID 015041534431364730da042078011700
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_GET_CID to PROBE_SEND_RELATIVE_ADDR
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Card published RCA: 7
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_RELATIVE_ADDR to PROBE_GET_CSD
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): CSD 400e00325b590000737f7f800a400000
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_GET_CSD to PROBE_SELECT_CARD
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SELECT_CARD to PROBE_DONE
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0
(mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start
(mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_DONE
(mmcprobe0:sdhci_slot0:0:0:0): Periph invalidated
(mmcprobe0:sdhci_slot0:0:0:0): Periph destroyed
(noperiph:sdhci_slot0:0:0:0): xpt_async(AC_FOUND_DEVICE)
ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub1: MTT enabled
Root mount waiting for: usbus1 CAM
uhub1: 4 ports with 3 removable, self powered
Root mount waiting for: usbus1 CAM
ugen1.3: <vendor 0x0424 product 0x2514> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbus1
uhub2: MTT enabled
uhub2: 3 ports with 2 removable, self powered
Root mount waiting for: usbus1 CAM
ugen1.4: <vendor 0x0424 product 0x7800> at usbus1
muge0 on uhub2
muge0: <vendor 0x0424 product 0x7800, rev 2.10/3.00, addr 4> on usbus1
muge0: Chip ID 0x7800 rev 0002
miibus0: <MII bus> on muge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on muge0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
ugen1.5: <GODO USB3.0 to SATA adapter> at usbus1
umass0 on uhub2
umass0: <GODO USB3.0 to SATA adapter, class 0/0, rev 2.10/1.00, addr 5> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
(noperiph:umass-sim0:0:-1:ffffffff): (probe0:umass-sim0:0:0:0): xpt_async(AC_PATH_REGISTERED)
Periph created
(probe0:umass-sim0:0:0:0): Probe started
(probe0:umass-sim0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY
(probe0:umass-sim0:0:0:0): Probe PROBE_INQUIRY to PROBE_FULL_INQUIRY
(probe0:umass-sim0:0:0:0): Probe PROBE_FULL_INQUIRY to PROBE_REPORT_LUNS
(probe0:umass-sim0:0:0:0): Probe: 1 lun(s) reported
(probe0:umass-sim0:0:0:0): Probe PROBE_REPORT_LUNS to PROBE_SUPPORTED_VPD_LIST
(probe0:umass-sim0:0:0:0): Probe PROBE_SUPPORTED_VPD_LIST to PROBE_DEVICE_ID
(probe0:umass-sim0:0:0:0): Probe PROBE_DEVICE_ID to PROBE_EXTENDED_INQUIRY
(probe0:umass-sim0:0:0:0): Probe PROBE_EXTENDED_INQUIRY to PROBE_SERIAL_NUM
(probe0:umass-sim0:0:0:0): Probe PROBE_SERIAL_NUM to PROBE_TUR_FOR_NEGOTIATION
(probe0:umass-sim0:0:0:0): Probe PROBE_TUR_FOR_NEGOTIATION to PROBE_DONE
(probe0:umass-sim0:0:0:0): Probe completed
(probe0:umass-sim0:0:0:0): Periph invalidated
(probe0:umass-sim0:0:0:0): Periph destroyed
(noperiph:umass-sim0:0:0:0): xpt_async(AC_FOUND_DEVICE)
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(sdda0:sdhci_slot0:0:0:0): Periph created
(da0:umass-sim0:0:0:0): Periph created
(pass0:sdhci_slot0:0:0:0): da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <LITEON C V3-DE256 0> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Periph created
(noperiph:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): daopen
xpt_async(AC_ADVINFO_CHANGED)
(pass1:umass-sim0:0:0:0): Periph created
(sdda0:sdhci_slot0:0:0:0): Capacity: 15502147584, sectors: 30277632
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): (sdda0:sdhci_slot0:0:0:0): daopen
Card supports HS
(sdda0:sdhci_slot0:0:0:0): Set SD freq to 50 MHz (min out of host f=200 MHz and card f=50 MHz)
(da0:umass-sim0:0:0:0): (sdda0:sdhci_slot0:0:0:0): daclose
Set bus width to 4-bit (min of host 4-bit and card 4-bit)
(da0:umass-sim0:0:0:0): (sdda0:sdhci_slot0:0:0:0): daopen
Partition type 'default', size 15502147584
sdda0 at sdhci_slot0 bus 0 scbus0 target 0 lun 0
sdda0: Relative addr: 00000007
Card features: <Memory High-Capacity SD2.0-Conditions 1.8-Signaling>
Card memory OCR: 00ff8000
sdda0: [_SERIAL_NUMBER_XXXXX]
(sdda0:sdhci_slot0:0:0:0): XPT info: CLK 50000000, ...
sdda0: SDHC SD16G 3.0 SN DA042078 MFG 07/2017 by 1 PA
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
(da0:umass-sim0:0:0:0): daopen
(da0:umass-sim0:0:0:0): daclose
mountroot: waiting for device /dev/gpt/ssdrootfs...
(da0:umass-sim0:0:0:0): daopen
WARNING: /: TRIM flag on fs but disk does not support TRIM
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat
Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat
lo0: link state changed to UP
muge0: Chip ID 0x7800 rev 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled