Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-03-17 08:45:51
From: ghoti
Description: Home server
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p1 GENERIC amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
CPU: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (2600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206d7  Family=0x6  Model=0x2d  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16553156608 (15786 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 16 17 9 19 23 12 20 27 28 5 24 2 21 29 13 8 31 10 7 1 14 11 22 6 25 4 3 26 15 18 30
Timecounter "TSC-low" frequency 1300027410 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 41 at device 3.0 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x8000-0x80ff mem 0xde47c000-0xde47ffff,0xde000000-0xde3fffff irq 16 at device 0.0 numa-domain 0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdfc24000-0xdfc243ff irq 16 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
em0: <Intel(R) PRO/1000 Network Connection> port 0x7000-0x701f mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 16 at device 0.0 numa-domain 0 on pci7
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 2 RX queues 2 TX queues
em0: Using MSI-X interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
em1: <Intel(R) PRO/1000 Network Connection> port 0x6000-0x601f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 17 at device 0.0 numa-domain 0 on pci8
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using 2 RX queues 2 TX queues
em1: Using MSI-X interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 2/1024, RX 2/1024
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdfc23000-0xdfc233ff irq 23 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib9: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18 at device 1.0 numa-domain 0 on pci9
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x9070-0x9077,0x9060-0x9063,0x9050-0x9057,0x9040-0x9043,0x9020-0x903f mem 0xdfc22000-0xdfc227ff irq 19 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pci10: <dasp, performance counters> at device 14.1 (no driver attached)
pci10: <dasp, performance counters> at device 19.1 (no driver attached)
pci10: <dasp, performance counters> at device 19.4 (no driver attached)
pci10: <dasp, performance counters> at device 19.5 (no driver attached)
pcib11: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci11: <ACPI PCI bus> numa-domain 1 on pcib11
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci12: <ACPI PCI bus> numa-domain 1 on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.4 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 3.39, version 2.0, device support mask 0xbf
ipmi0: Number of channels 2
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:z/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <Crucial CT128M550SSD1 MU01> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <ST3000DM001-1ER166 CC43> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors)
ada1: quirks=0x1<4K>
ses0: pass1,ada0 in 'Slot 00', SATA Slot: scbus1 target 0
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <ST2000DM001-1CH164 CC27> ACS-2 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <ST31500341AS CC1H> ATA8-ACS SATA 2.x device
ada3: [_SERIAL_NUMBER_XXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1430799MB (2930277168 512 byte sectors)
ses0: pass2,ada1 in 'Slot 01', SATA Slot: scbus2 target 0
ses0: pass3,ada2 in 'Slot 02', SATA Slot: scbus3 target 0
ses0: pass4,ada3 in 'Slot 03', SATA Slot: scbus4 target 0
da0 at isci0 bus 0 scbus0 target 3 lun 0
da0: <ATA WDC WD10EARX-00N AB51> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x8<4K>
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0 usbus1
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.3: <American Power Conversion Back-UPS XS 1200 FW:8.g1 .D USB FW:g1> at usbus0
ugen1.3: <vendor 0x04d9 USB Keyboard> at usbus1
ukbd1 numa-domain 0 on uhub2
ukbd1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus1
kbd1 at ukbd1
ugen0.4: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0
ukbd0 numa-domain 0 on uhub3
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 4> on usbus0
kbd2 at ukbd0
ioat0: <SNB IOAT Ch0> mem 0xdfc1c000-0xdfc1ffff irq 31 at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <SNB IOAT Ch1> mem 0xdfc18000-0xdfc1bfff irq 39 at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <SNB IOAT Ch2> mem 0xdfc14000-0xdfc17fff irq 31 at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <SNB IOAT Ch3> mem 0xdfc10000-0xdfc13fff irq 39 at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <SNB IOAT Ch4> mem 0xdfc0c000-0xdfc0ffff irq 31 at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <SNB IOAT Ch5> mem 0xdfc08000-0xdfc0bfff irq 39 at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <SNB IOAT Ch6> mem 0xdfc04000-0xdfc07fff irq 31 at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <SNB IOAT Ch7> mem 0xdfc00000-0xdfc03fff irq 39 at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat8: <SNB IOAT Ch0> mem 0xfbf1c000-0xfbf1ffff irq 55 at device 4.0 numa-domain 1 on pci11
ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat9: <SNB IOAT Ch1> mem 0xfbf18000-0xfbf1bfff irq 63 at device 4.1 numa-domain 1 on pci11
ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat10: <SNB IOAT Ch2> mem 0xfbf14000-0xfbf17fff irq 55 at device 4.2 numa-domain 1 on pci11
ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat11: <SNB IOAT Ch3> mem 0xfbf10000-0xfbf13fff irq 63 at device 4.3 numa-domain 1 on pci11
ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat12: <SNB IOAT Ch4> mem 0xfbf0c000-0xfbf0ffff irq 55 at device 4.4 numa-domain 1 on pci11
ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat13: <SNB IOAT Ch5> mem 0xfbf08000-0xfbf0bfff irq 63 at device 4.5 numa-domain 1 on pci11
ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat14: <SNB IOAT Ch6> mem 0xfbf04000-0xfbf07fff irq 55 at device 4.6 numa-domain 1 on pci11
ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat15: <SNB IOAT Ch7> mem 0xfbf00000-0xfbf03fff irq 63 at device 4.7 numa-domain 1 on pci11
ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
lo0: link state changed to UP
em1: link state changed to UP
uhid0 numa-domain 0 on uhub2
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus1
ums0 numa-domain 0 on uhub3
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 4> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled