Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-04-07 18:07:54
From: gon
Description: FreeBSD/amd64 on Dell Inc. Vostro 470
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p13 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3395.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33343447040 (31798 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 5 2 4 3 6 7
Timecounter "TSC-low" frequency 1697837080 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL FX09   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7100000-0xf710ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7118000-0xf71183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Panther Point HDA Controller> mem 0xf7110000-0xf7113fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7117000-0xf71173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7116000-0xf71167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
device_attach: ahciem0 attach returned 6
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC887 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1
hdacc2: <Intel Panther Point HDA CODEC> at cad 3 on hdac1
hdaa2: <Intel Panther Point Audio Function Group> at nid 1 on hdacc2
pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SH-216BB D100> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: ada1 at ahcich5 bus 0 scbus4 target 0 lun 0
ada1: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
GEOM_MIRROR: Device mirror/gm0 launched (1/2).
GEOM_MIRROR: Device gm0: rebuilding provider ada0.
random: unblocking device.
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
uhub2: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O> at usbus1
ukbd0 on uhub4
ukbd0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
kbd2 at ukbd0
ugen1.4: <vendor 0x0461 USB Optical Mouse> at usbus1
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.4: <Generic Mass Storage Device> at usbus2
umass1 on uhub3
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus2
umass1:  SCSI over Bulk-Only; quirks = 0x4001
umass1:6:1: Attached to scbus6
da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
da1: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim1 bus 1 scbus6 target 0 lun 1
da2: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim1 bus 1 scbus6 target 0 lun 2
da3: <Generic- SM/xD Picture 1.02> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
da4 at umass-sim1 bus 1 scbus6 target 0 lun 3
da4: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXX]
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
nvidia0: <GeForce GT 620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub4
ums0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=1
ums1 on uhub4
ums1: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on usbus1
ums1: 3 buttons and [XYZ] coordinates ID=0
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
tun0: link state changed to UP
GEOM_MIRROR: Device gm0: rebuilding provider ada0 finished.
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2 (disconnected)
umass0: at uhub3, port 6, addr 3 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117>  s/n 111122223333 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
re0: link state changed to DOWN
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2 (disconnected)
umass0: at uhub3, port 6, addr 3 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117>  s/n 111122223333 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to UP
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2 (disconnected)
umass0: at uhub3, port 6, addr 3 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117>  s/n 111122223333 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
re0: link state changed to DOWN
re0: link state changed to UP
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2 (disconnected)
umass0: at uhub3, port 6, addr 3 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117>  s/n 111122223333 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0xc101
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
pid 55096 (clj-kondo.old), jid 0, uid 1001: exited on signal 11 (core dumped)
pid 55194 (clj-kondo), jid 0, uid 1001: exited on signal 11 (core dumped)
ugen0.2: <SAMSUNG SAMSUNGAndroid> at usbus0
WARNING: /mnt/store1 was not properly dismounted
ugen0.2: <SAMSUNG SAMSUNGAndroid> at usbus0 (disconnected)
arp:[_IP_XXXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on re0
arp:[_IP_XXXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on re0
arp:[_IP_XXXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on re0
arp:[_IP_XXXXXXXXX] moved from [_MAC_XXXXXXXXXX] to [_MAC_XXXXXXXXXX] on re0
pid 16581 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16738 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16794 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16812 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16827 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16828 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16956 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16957 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16958 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16959 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16960 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16961 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16962 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16963 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16964 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16967 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16968 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16969 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16970 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16971 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16972 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16974 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16976 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16977 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16978 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
pid 16979 (clj-kondo), jid 0, uid 1003: exited on signal 11 (core dumped)
tun0: link state changed to DOWN
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p4 GENERIC amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3395.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33344581632 (31799 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 6 4 5 3 2 7
Timecounter "TSC-low" frequency 1697837464 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL FX09   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7100000-0xf710ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7118000-0xf71183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Panther Point HDA Controller> mem 0xf7110000-0xf7113fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7117000-0xf71173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7116000-0xf71167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC887 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1
hdacc2: <Intel Panther Point HDA CODEC> at cad 3 on hdac1
hdaa2: <Intel Panther Point Audio Function Group> at nid 1 on hdacc2
pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich5 bus 0 scbus4 target 0 lun 0
ada1: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: cd0 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: ada1 in 'Slot 05', SATA Slot: scbus4 target 0
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SH-216BB D100> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
uhub2: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for: usbus1 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O> at usbus1
ukbd0 on uhub3
ukbd0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus1 usbus2
ugen1.4: <vendor 0x0461 USB Optical Mouse> at usbus1
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub4
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.4: <Generic Mass Storage Device> at usbus2
umass1 on uhub4
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus2
umass1:  SCSI over Bulk-Only; quirks = 0x4001
umass1:7:1: Attached to scbus7
da1 at umass-sim1 bus 1 scbus7 target 0 lun 0
da1: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim1 bus 1 scbus7 target 0 lun 1
da2: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim1 bus 1 scbus7 target 0 lun 2
da3: <Generic- SM/xD Picture 1.02> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
da4 at umass-sim1 bus 1 scbus7 target 0 lun 3
da4: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXX]
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
mountroot: waiting for device /dev/mirror/gm0s1a...
nvidia0: <GeForce GT 620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub3
ums0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=1
ums1 on uhub3
ums1: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on usbus1
ums1: 3 buttons and [XYZ] coordinates ID=0
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
tun0: link state changed to UP
tun0: link state changed to DOWN
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 1 1 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p4 GENERIC amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3395.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33344581632 (31799 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   FX09   >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 5 2 7 4 3 6
Timecounter "TSC-low" frequency 1697837424 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL FX09   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA GF119 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7100000-0xf710ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7118000-0xf71183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Panther Point HDA Controller> mem 0xf7110000-0xf7113fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2104000-0xf2104fff,0xf2100000-0xf2103fff irq 19 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7117000-0xf71173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7116000-0xf71167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC887 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa1
hdacc2: <Intel Panther Point HDA CODEC> at cad 3 on hdac1
hdaa2: <Intel Panther Point Audio Function Group> at nid 1 on hdacc2
pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich5 bus 0 scbus4 target 0 lun 0
ada1: <Hitachi HUA722010CLA330 JP4OA3EA> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: cd0,pass1 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: ada1,pass2 in 'Slot 05', SATA Slot: scbus4 target 0
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SH-216BB D100> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1 usbus2
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O> at usbus1
ukbd0 on uhub4
ukbd0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus1 usbus2
ugen1.4: <vendor 0x0461 USB Optical Mouse> at usbus1
ugen2.3: <Verbatim USB 3.0 Desktop Hard Drive> at usbus2
umass0 on uhub3
umass0: <MSC Bulk-Only Transport> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Jmicron Corp. 0117> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen2.4: <Generic Mass Storage Device> at usbus2
umass1 on uhub3
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus2
umass1:  SCSI over Bulk-Only; quirks = 0x4001
umass1:7:1: Attached to scbus7
da1 at umass-sim1 bus 1 scbus7 target 0 lun 0
da1: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim1 bus 1 scbus7 target 0 lun 1
da2: <Generic- Compact Flash 1.01> Removable Direct Access SCSI device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim1 bus 1 scbus7 target 0 lun 2
da3: <Generic- SM/xD Picture 1.02> Removable Direct Access SCSI device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
da4 at umass-sim1 bus 1 scbus7 target 0 lun 3
da4: <Generic- MS/MS-Pro 1.03> Removable Direct Access SCSI device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
mountroot: waiting for device /dev/mirror/gm0s1a...
nvidia0: <GeForce GT 620> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
ums0 on uhub4
ums0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.09O, class 0/0, rev 1.10/0.01, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=1
ums1 on uhub4
ums1: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on usbus1
ums1: 3 buttons and [XYZ] coordinates ID=0
pflog0: promiscuous mode enabled