Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-04-11 10:51:15
From: ronald
Description: FreeBSD-13.0-RELEASE/arm64 GENERIC-MMCCAM on raspberrypi rpi 3Bplus
---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE #10 releng/13.0-n244733-ea31abc261f: Fri Apr 9 10:32:34 CEST 2021 builder@rpi3:/data/src/obj/data/src/freebsd-13.0/arm64.aarch64/sys/GENERIC-MMCCAM arm64 FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 656x416 module firmware already present! real memory = 993824768 (947 MB) avail memory = 947798016 (903 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 39f35000 mode 2 pages 1 MAP 39f39000 mode 2 pages 3 MAP 39f3d000 mode 2 pages 4 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 0 pages 1 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 bcm2835_firmware0: <BCM2835 Firmware> on simplebus0 ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0 gpiobus1: <GPIO bus> on gpio1 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0 usbus1 on bcm283x_dwcotg0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0 gpioc1: <GPIO controller> on gpio1 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 32bpp fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 cryptosoft0: <software crypto> armv8crypto0: CPU lacks AES instructions Timecounters tick every 1.000 msec iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 (noperiph:sdhci_slot0:0:-1:ffffffff): xpt_async(AC_PATH_REGISTERED) usbus1: 480Mbps High Speed USB v2.0 (noperiph:sdhci_slot0:0:-1:ffffffff): XPT_SCAN_{BUS,TGT,LUN} (noperiph:sdhci_slot0:0:0:0): XPT_SCAN_{BUS,TGT,LUN} (noperiph:sdhci_slot0:0:0:0): ugen1.1: <DWCOTG OTG Root HUB> at usbus1 uhub0 on usbus1 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Set up the mmcprobe device... (mmcprobe0:sdhci_slot0:0:0:0): Periph created (mmcprobe0:sdhci_slot0:0:0:0): Probe started (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_INVALID to PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_IDENTIFY bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Trying to mount root from ufs:/dev/gpt/ssdrootfs []... Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Root mount waiting for: Instruction Set Attributes 0 = <CRC32> usbus1 Instruction Set Attributes 1 = <> CAM Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 (mmcprobe0:sdhci_slot0:0:0:0): Send first XPT_MMC_IO (mmcprobe0:sdhci_slot0:0:0:0): done with PROBE_RESET (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_RESET to PROBE_SEND_IF_COND (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SEND_IF_COND (mmcprobe0:sdhci_slot0:0:0:0): SD 2.0 interface conditions: OK (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_IF_COND to PROBE_SDIO_RESET (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_RESET (mmcprobe0:sdhci_slot0:0:0:0): SDIO_RESET: error 1, CCCR CTL register: 00000000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_RESET to PROBE_SDIO_INIT uhub0: 1 port with 1 removable, self powered (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_SDIO_INIT (mmcprobe0:sdhci_slot0:0:0:0): SDIO_INIT: error 1, 00000000 00000000 00000000 00000000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SDIO_INIT to PROBE_SEND_APP_OP_COND (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Card OCR: 00ff8000 (mmcprobe0:sdhci_slot0:0:0:0): -> sending OCR to card (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Card not ready: 00ff8000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_APP_OP_COND to PROBE_SEND_APP_OP_COND (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Card OCR: c1ff8000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_APP_OP_COND to PROBE_GET_CID (mmcprobe0:sdhci_slot0:0:0:0): Card is SDHC (mmcprobe0:sdhci_slot0:0:0:0): Card supports 1.8V signaling (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): CID 015041534431364730da042078011700 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_GET_CID to PROBE_SEND_RELATIVE_ADDR (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Card published RCA: 7 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SEND_RELATIVE_ADDR to PROBE_GET_CSD (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): CSD 400e00325b590000737f7f800a400000 (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_GET_CSD to PROBE_SELECT_CARD (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Probe PROBE_SELECT_CARD to PROBE_DONE (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_done: remaining freeze count 0 (mmcprobe0:sdhci_slot0:0:0:0): mmcprobe_start (mmcprobe0:sdhci_slot0:0:0:0): Start with PROBE_DONE (mmcprobe0:sdhci_slot0:0:0:0): Periph invalidated (mmcprobe0:sdhci_slot0:0:0:0): Periph destroyed (noperiph:sdhci_slot0:0:0:0): xpt_async(AC_FOUND_DEVICE) ugen1.2: <vendor 0x0424 product 0x2514> at usbus1 uhub1 on uhub0 uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1 uhub1: MTT enabled Root mount waiting for: usbus1 CAM uhub1: 4 ports with 3 removable, self powered Root mount waiting for: usbus1 CAM ugen1.3: <vendor 0x0424 product 0x2514> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbus1 uhub2: MTT enabled uhub2: 3 ports with 2 removable, self powered Root mount waiting for: usbus1 CAM ugen1.4: <vendor 0x0424 product 0x7800> at usbus1 muge0 on uhub2 muge0: <vendor 0x0424 product 0x7800, rev 2.10/3.00, addr 4> on usbus1 muge0: Chip ID 0x7800 rev 0002 miibus0: <MII bus> on muge0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto ue0: <USB Ethernet> on muge0 ue0: Ethernet address: [_MAC_XXXXXXXXXX] Root mount waiting for: usbus1 CAM Root mount waiting for: usbus1 CAM ugen1.5: <GODO USB3.0 to SATA adapter> at usbus1 umass0 on uhub1 umass0: <GODO USB3.0 to SATA adapter, class 0/0, rev 2.10/1.00, addr 5> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:1:0: Attached to scbus1 (noperiph:umass-sim0:0:-1:ffffffff): (probe0:umass-sim0:0:0:0): Periph created (probe0:umass-sim0:0:0:0): xpt_async(AC_PATH_REGISTERED) Probe started (probe0:umass-sim0:0:0:0): Probe PROBE_INVALID to PROBE_INQUIRY (probe0:umass-sim0:0:0:0): Probe PROBE_INQUIRY to PROBE_FULL_INQUIRY (probe0:umass-sim0:0:0:0): Probe PROBE_FULL_INQUIRY to PROBE_REPORT_LUNS (probe0:umass-sim0:0:0:0): Probe: 1 lun(s) reported (probe0:umass-sim0:0:0:0): Probe PROBE_REPORT_LUNS to PROBE_SUPPORTED_VPD_LIST (probe0:umass-sim0:0:0:0): Probe PROBE_SUPPORTED_VPD_LIST to PROBE_DEVICE_ID (probe0:umass-sim0:0:0:0): Probe PROBE_DEVICE_ID to PROBE_EXTENDED_INQUIRY (probe0:umass-sim0:0:0:0): Probe PROBE_EXTENDED_INQUIRY to PROBE_SERIAL_NUM (probe0:umass-sim0:0:0:0): Probe PROBE_SERIAL_NUM to PROBE_TUR_FOR_NEGOTIATION (probe0:umass-sim0:0:0:0): Probe PROBE_TUR_FOR_NEGOTIATION to PROBE_DONE (probe0:umass-sim0:0:0:0): Probe completed (probe0:umass-sim0:0:0:0): Periph invalidated (probe0:umass-sim0:0:0:0): Periph destroyed (noperiph:umass-sim0:0:0:0): xpt_async(AC_FOUND_DEVICE) Root mount waiting for: usbus1 CAM ugen1.6: <Silicon Labs CP2102 USB to UART Bridge Controller> at usbus1 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM (sdda0:sdhci_slot0:0:0:0): Periph created (da0:umass-sim0:0:0:0): Periph created (pass0:sdhci_slot0:0:0:0): da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <LITEON C V3-DE256 0> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 40.000MB/s transfers da0: 244198MB (500118192 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Periph created (noperiph:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): xpt_async(AC_ADVINFO_CHANGED) daopen (pass1:umass-sim0:0:0:0): Periph created (sdda0:sdhci_slot0:0:0:0): Capacity: 15502147584, sectors: 30277632 (sdda0:sdhci_slot0:0:0:0): Card supports HS (sdda0:sdhci_slot0:0:0:0): Set SD freq to 50 MHz (min out of host f=200 MHz and card f=50 MHz) (da0:umass-sim0:0:0:0): (sdda0:sdhci_slot0:0:0:0): daclose (da0:umass-sim0:0:0:0): Set bus width to 4-bit (min of host 4-bit and card 4-bit) daopen (sdda0:sdhci_slot0:0:0:0): (da0:umass-sim0:0:0:0): Partition type 'default', size 15502147584 daclose sdda0 at sdhci_slot0 bus 0 scbus0 target 0 lun 0 (da0:umass-sim0:0:0:0): sdda0: Relative addr: 00000007 daopen Card features: <Memory High-Capacity SD2.0-Conditions 1.8-Signaling> (da0:umass-sim0:0:0:0): Card memory OCR: 00ff8000 daclose (da0:umass-sim0:0:0:0): sdda0: [_SERIAL_NUMBER_XXXXX] daopen (sdda0:sdhci_slot0:0:0:0): XPT info: CLK 50000000, ... sdda0: SDHC SD16G 3.0 SN DA042078 MFG 07/2017 by 1 PA (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose (da0:umass-sim0:0:0:0): daopen (da0:umass-sim0:0:0:0): daclose mountroot: waiting for device /dev/gpt/ssdrootfs... (da0:umass-sim0:0:0:0): daopen WARNING: / was not properly dismounted WARNING: /: TRIM flag on fs but disk does not support TRIM Warning: no time-of-day clock registered, system time will not be set accurately Dual Console: Serial Primary, Video Secondary WARNING: / was not properly dismounted WARNING: /bootdir was not properly dismounted lo0: link state changed to UP muge0: Chip ID 0x7800 rev 0002 ue0: link state changed to DOWN ue0: link state changed to UP uslcom0 on uhub1 uslcom0: <CP2102 USB to UART Bridge Controller> on usbus1 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled