Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-05-13 20:16:15
From: tomek
Description: FreeBSD/amd64 on To Be Filled By O.E.M. To Be Filled By O.E.M.
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p6 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT: init without driver. CPU: Intel(R) Pentium(R) CPU J3710 @ 1.60GHz (1600.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16046034944 (15302 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20200430/tbfadt-748) ioapic0 <Version 2.0> irqs 0-114 on motherboard Launching APs: 2 3 1 Timecounter "TSC" frequency 1600051860 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 cryptosoft0: <software crypto> on motherboard acpi0: <> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x91415000-0x914157ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91304000-0x91304fff,0x91300000-0x91303fff irq 18 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib4 ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0x91200000-0x912001ff irq 19 at device 0.0 on pci2 ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahci1: quirks=0xc00000<NOCCS,NOAUX> ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0 pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0 hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 pcm3: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm4: <Intel Braswell (HDMI/DP 8ch)> at nid 6 on hdaa1 pcm5: <Intel Braswell (HDMI/DP 8ch)> at nid 7 on hdaa1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub0: Root mount waiting for:<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 CAM usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Crucial CT275MX300SSD1 M0CR060> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 262321MB (537234768 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD10S21X-24R1BT0-SSHD-8GB 03.01A02> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST2000LM015-2E8174 SDM1> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <ST2000LM015-2E8174 SDM1> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 1907729MB (3907029168 512 byte sectors) uhub0: 13 ports with 13 removable, self powered ugen0.2: <ASMedia AS2107> at usbus0 uhub1 on uhub0 uhub1: <ASMedia AS2107, class 9/0, rev 2.10/0.01, addr 1> on usbus0 uhub1: MTT enabled uhub1: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.31, addr 2> on usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.4: <ASMedia AS2107> at usbus0 uhub3 on uhub0 uhub3: <ASMedia AS2107, class 9/0, rev 3.00/0.01, addr 3> on usbus0 uhub3: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 mountroot: waiting for device /dev/ada0p2... WARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 104 files 3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) WARNING: /blockchain was not properly dismounted lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP