Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-05-17 07:54:24
From: vlado
Description: Raspberry Pi Zero FreeBSD rpi-b 13.0-RELEASE FreeBSD 13.0-RELEASE
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 06:30:27 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm.armv6/sys/RPI-B arm
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT: init without driver.
CPU: ARM ARM1176 r0p7 (ECO: 0x00000000)
CPU Features:
Thumb, Security, VMSAv7
Optional instructions:
UMULL, SMULL, MLA, SIMD(ext)
16KB/32B 4-way instruction cache
16KB/32B 4-way WB data cache
real memory = 469757952 (447 MB)
avail memory = 445689856 (425 MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 6,7 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 5 on simplebus0
systimer0 mem 0x7e003000-0x7e003fff irq 0,1,2,3 on simplebus0
Event timer "BCM2835-3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835-3" frequency 1000000 Hz quality 1000
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 8 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 20,21 on simplebus0
usbus1 on bcm283x_dwcotg0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 46 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
vchiq0: <BCM2835 VCHIQ> mem 0x7e00b840-0x7e00b87b irq 52 on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: initialize with new VT driver "fb".
fb0: 1024x768(1024x768@0,0) 32bpp
fb0: fbswap: 1, pitch 4096, base 0x1e8fa000, screen_size 3145728
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 16GB <SDHC SU16G 8.0 SN 00736959 MFG 06/2013 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 700MHz, Core 400MHz, SDRAM 400MHz, Turbo OFF
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
ugen1.2: <vendor 0x0409 product 0x0059> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0409 product 0x0059, class 9/0, rev 2.00/1.00, addr 2> on usbus1
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
uhub1: 4 ports with 4 removable, self powered
ugen1.3: <Realtek 802.11n NIC> at usbus1
rtwn0 on uhub1
rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 3> on usbus1
rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
wlan0: link state changed to UP