Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-05-28 23:03:20
From: anarro
Description: FreeBSD/i386 on To be filled by O.E.M. To be filled by O.E.M.
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE r366954 GENERIC i386 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: AMD FX(tm)-8350 Eight-Core Processor (4013.44-MHz 686-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 2804875264 (2674 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard Launching APs: 1 3 4 7 2 6 5 Timecounter "TSC-low" frequency 2006722145 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x14c8db0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 44 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] pcib3: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 50 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe30b000-0xfe30b3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe30a000-0xfe30afff irq 18 at device 18.0 on pci0 usbus1 on ohci0 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe309000-0xfe3090ff irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe308000-0xfe308fff irq 20 at device 19.0 on pci0 usbus3 on ohci1 usbus3: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe307000-0xfe3070ff irq 21 at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci1 usbus4: 480Mbps High Speed USB v2.0 hdac1: <ATI SB600 HDA Controller> mem 0xfe300000-0xfe303fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfe120000-0xfe1200ff irq 20 at device 5.0 on pci4 re1: Chip rev. 0x10000000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe306000-0xfe306fff irq 18 at device 20.5 on pci0 usbus5 on ohci2 usbus5: 12Mbps Full Speed USB v1.0 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe305000-0xfe305fff irq 22 at device 22.0 on pci0 usbus6 on ohci3 usbus6: 12Mbps Full Speed USB v1.0 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe304000-0xfe3040ff irq 23 at device 22.2 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci2 usbus7: 480Mbps High Speed USB v2.0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ppc0: parallel port not found. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0 hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1 pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1 hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0 hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2 pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2 hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0 hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3 pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3 hdacc4: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1 hdaa4: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc4 pcm4: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa4 pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa4 pcm6: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa4 ugen7.1: <ATI EHCI root HUB> at usbus7 ugen5.1: <ATI OHCI root HUB> at usbus5 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen4.1: <ATI EHCI root HUB> at usbus4 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <ATI OHCI root HUB> at usbus6 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ugen2.1: <ATI EHCI root HUB> at usbus2 Trying to mount root from ufs:/dev/raid/r0s1a [rw]... Root mount waiting for: usbus0 CAM usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 uhub3: ugen3.1: <ATI OHCI root HUB> at usbus3 <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <0x1b21 XHCI root HUB> at usbus0 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub7: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ADATA SU630 XA003R17> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 228936MB (468862128 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST4000DM000-2AE166 0001> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <ST4000DM004-2CV104 0001> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <ST4000DM004-2CV104 0001> ACS-3 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXX] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 3815447MB (7814037168 512 byte sectors) ada4: quirks=0x1<4K> cd0 at ahcich5 bus 0 scbus5 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GH24NS72 WM01> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub6: 4 ports with 4 removable, self powered GEOM_RAID: Promise: Array Promise created. uhub5: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub7: 4 ports with 4 removable, self powered GEOM_RAID: Promise: Disk ada2 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Subdisk DATA:0-ada2 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Subdisk DATA:1-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Volume started. GEOM_RAID: Promise: Volume DATA state changed from STARTING to OPTIMAL. GEOM_RAID: Promise: Provider raid/r1 for volume DATA created. GEOM_RAID: Promise: Disk ada4 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Subdisk RESP:0-ada4 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Volume started. GEOM_RAID: Promise: Volume RESP state changed from STARTING to OPTIMAL. GEOM_RAID: Promise: Provider raid/r2 for volume RESP created. Root mount waiting for: usbus2 usbus4 usbus7 GRAID uhub1: 4 ports with 4 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered Root mount waiting for: GRAID ugen1.2: <vendor 0x0557 product 0x8021> at usbus1 uhub8 on uhub3 uhub8: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus1 Root mount waiting for: GRAID uhub8: 4 ports with 4 removable, self powered Root mount waiting for: GRAID ugen1.3: <ATEN International Co. Ltd B020-U08-19 V1.1.101> at usbus1 ukbd0 on uhub8 ukbd0: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus1 kbd2 at ukbd0 Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID Root mount waiting for: GRAID GEOM_RAID: Promise: Force volume start due to timeout. GEOM_RAID: Promise: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Subdisk FBSD122:0-ada0 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: Promise: Subdisk FBSD122:1-ada1 state changed from NONE to STALE. GEOM_RAID: Promise: Volume started. GEOM_RAID: Promise: Subdisk FBSD122:1-ada1 state changed from STALE to RESYNC. Root mount waiting for: GRAID GEOM_RAID: Promise: Subdisk FBSD122:1-ada1 rebuild start at 0. GEOM_RAID: Promise: Volume FBSD122 state changed from STARTING to SUBOPTIMAL. GEOM_RAID: Promise: Provider raid/r0 for volume FBSD122 created. mountroot: waiting for device /dev/raid/r0s1a... WARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 0 files 1 intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 lo0: link state changed to UP re1: link state changed to DOWN re1: link state changed to UP re0: link state changed to DOWN uhid0 on uhub8 uhid0: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus1 ums0 on uhub8 ums0: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus1 ums0: 5 buttons and [XYZ] coordinates ID=0 ums1 on uhub8 ums1: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus1