Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-05-29 18:14:52
From: puppy
Description: FreeBSD/amd64 on Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: AMD FX(tm)-4300 Quad-Core Processor (3816.96-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 12884901888 (12288 MB)
avail memory = 12443217920 (11866 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 0
ioapic0 <Version 2.1> irqs 0-23
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1908479193 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000058 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <GBT GBTUACPI>
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20201113/dspkginit-605)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfb000000-0xfbffffff,0xc0000000-0xcfffffff,0xde000000-0xdfffffff irq 18 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xfcffc000-0xfcffffff irq 19 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfdaff000-0xfdafffff irq 16 at device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdeff000-0xfdefffff,0xfddfc000-0xfddfffff irq 18 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
usbus5 on ohci3
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
usbus7 on ohci4
usbus7: 12Mbps Full Speed USB v1.0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen3.1: <ATI EHCI root HUB> at usbus3
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen7.1: <ATI OHCI root HUB> at usbus7
uhub0 on usbus3
uhub1 on usbus1
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub2 on usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3 on usbus7
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen0.1: <0x1106 XHCI root HUB> at usbus0
hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC892 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7
uhub4 on usbus0
uhub4: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen6.1: <ATI EHCI root HUB> at usbus6
uhub5 on usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6 on usbus4
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub7 on usbus6
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub3: 2 ports with 2 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
uhub4: 5 ports with 4 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub8 on uhub4
uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10EZEX-00BN5A0 01.01A01> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
cd0 at ata1 bus 0 scbus5 target 0 lun 0
cd0: <HL-DT-ST BD-RE WH16NS40 1.05> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 521MB (267087 2048 byte sectors)
uhub8: 4 ports with 4 removable, self powered
uhub0: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <Primax Kensington Eagle Trackball> at usbus1
ugen2.2: <Corsair Corsair Gaming K70 LUX Keyboard> at usbus2
ukbd0 on uhub2
ukbd0: <Corsair Corsair Gaming K70 LUX Keyboard, class 0/0, rev 2.00/2.04, addr 2> on usbus2
kbd2 at ukbd0
ukbd1 on uhub2
ukbd1: <Corsair Corsair Gaming K70 LUX Keyboard, class 0/0, rev 2.00/2.04, addr 2> on usbus2
kbd3 at ukbd1
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
intsmb0: intr SMI enabled revision 0
intsmb0: using polling mode when configured interrupt is SMI
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
nvidia0: <GeForce GTX 970> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.67 Thu Mar 11 00:01:57 UTC 2021
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub1
ums0: <Primax Kensington Eagle Trackball, class 0/0, rev 2.00/6.00, addr 2> on usbus1
uhid0 on uhub2
uhid0: <Corsair Corsair Gaming K70 LUX Keyboard, class 0/0, rev 2.00/2.04, addr 2> on usbus2
device_attach: uhid0 attach returned 12
ums0: 3 buttons and [XYZT] coordinates ID=0
uhid0 on uhub2
uhid0: <Corsair Corsair Gaming K70 LUX Keyboard, class 0/0, rev 2.00/2.04, addr 2> on usbus2
device_attach: uhid0 attach returned 12
re0: link state changed to UP