Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-06-09 20:22:15
From: T
Description: NetBSD/prep 8.1_STABLE on IBM RS/6000 43P Series, Model 7248-132
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.1_STABLE (7248-132.v6) #8: Fri Feb 21 21:56:23 MST 2020
xxxx@xxxx:/usr/obj/prep/netbsd-8/objdir/sys/arch/prep/compile/GENERIC
Model: IBM PPS Model 7248 (E)
total memory = 192 MB
avail memory = 180 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: 604 (Revision 3.4), ID 0 (primary)
cpu0: HID0 0xc084<ICE,DCE,SGE,BHT>, powersave: 1
cpu0: 133.33 MHz
pnpbus0 at mainbus0
fdc0 at pnpbus0: port 0x3f0-0x3f5 0x3f7, irq 6, DMA 2
mcclock0 at pnpbus0: port 0x70-0x71, irq 8: mc146818 compatible time-of-day clock
nvram0 at pnpbus0: port 0x74-0x75 0x76
nvram0: Read 3118 bytes from nvram of size 4096
pci0 at mainbus0 bus 0: indirect configuration space access
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 1057 product 0001 (rev. 0x24)
pchb0: L2 cache: 512K, write-through mode
pcib0 at pci0 dev 11 function 0: vendor 1014 product 000a (rev. 0x02)
pcib0: PIRQ[0-3] not used
pcn0 at pci0 dev 12 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c970A PCnet-PCI II rev 3, Ethernet address xx:xx:xx:xx:xx:xx
pcn0: interrupting at irq 15
pcn0: 10base5, 10base5-FDX, 10baseT, 10baseT-FDX, auto, auto-FDX
vga0 at pci0 dev 14 function 0: vendor 5333 product 88c1 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
siop0 at pci0 dev 16 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at irq 15
siop0: scsi bus reset
scsibus0 at siop0: 8 targets, 8 luns per target
pdcsata0 at pci0 dev 18 function 0: Promise PDC40719 SATA300 controller (rev. 0x02)
pdcsata0: interrupting at irq 15
pdcsata0: bus-master DMA support present
atabus0 at pdcsata0 channel 0
atabus1 at pdcsata0 channel 1
atabus2 at pdcsata0 channel 2
atabus3 at pdcsata0 channel 3
ohci0 at pci0 dev 22 function 0: vendor 1033 product 0035 (rev. 0x43)
ohci0: interrupting at irq 15
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 22 function 1: vendor 1033 product 0035 (rev. 0x43)
ohci1: interrupting at irq 15
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 22 function 2: vendor 1033 product 00e0 (rev. 0x04)
ehci0: interrupting at irq 15
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
isabeep0 at pcppi0
isapnp0 at isa0 port 0x279
attimer0: attached to pcppi0
isapnp0: read port 0x203
wss0 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 9 drq 0,1
wss0: Crystal CS4232 Sound Chip : CS4232C
audio0 at wss0: full duplex, playback, capture, mmap
wss0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
wss0: Latency: 256 milliseconds
opl at wss0 not configured
isapnp0: <Crystal CS4232 Sound Chip, CSC0001, , > port 0x10/8 not configured
isapnp0: <Crystal CS4232 Sound Chip, CSC0002, , 4232> port 0x10/8 not configured
isapnp0: <Crystal CS4232 Sound Chip, CSC0003, , > port 0x330/2 irq 11 not configured
isapnp0: <Crystal CS4232 Sound Chip, CSC0004, , CD-ROM> port 0x10/4 not configured
isapnp0: <IBM FEI, @H@0000, , > port 0x320/32 irq 11 not configured
ep0 at isapnp0 port 0x280/32 irq 11 drq 3
3Com Fast EtherLink ISA
ep0: address xx:xx:xx:xx:xx:xx, 64KB word-wide FIFO, 1:1 Rx:Tx split
nsphy0 at ep0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vmmask 71400000 schedmask 71c00000 highmask 7fc00000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 16666666 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 1033 (0x1033) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
pdcsata0 port 3: device present, speed: 3.0Gb/s
fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus3 drive 0
sd0 at scsibus0 target 0 lun 0: <IBM, DSAS-0666, 3.3> disk fixed
sd0: 2048 MB, 261 cyl, 255 head, 63 sec, 512 bytes/sect x 4194304 sectors
sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
cd0 at scsibus0 target 1 lun 0: <IBM, CDROMMER, 3.3> cdrom removable
cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
uhub3 at uhub2 port 1: Generic (0xbda) 4-Port USB 2.0 Hub (0x5411), class 9/0, rev 2.10/1.04, addr 2
uhub3: multiple transaction translators
uhub3: 4 ports with 4 removable, self powered
cd1 at scsibus0 target 6 lun 0: <IBM, CDRM00203\000\000\000\000\000!K, BZ26> cdrom removable
cd1: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB-PS/2 Optical Mouse (0xc01b), rev 2.00/18.00, addr 3, iclass 3/1
ums0 at uhidev0: 6 buttons and Z dir
wsmouse0 at ums0 mux 0
pdcsata0:3:0: lost interrupt
type: ata tc_bcount: 512 tc_skip: 0
wd0: <KINGSTON SA400S37120G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(pdcsata0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub3 port 4 configuration 1 interface 0
umass0: SanDisk (0x781) Cruzer Fit (0x5571), rev 2.10/1.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <SanDisk, Cruzer Fit, 1.00> disk removable
sd1: 14939 MB, 30352 cyl, 16 head, 63 sec, 512 bytes/sect x 30595072 sectors
WARNING: 2 errors while detecting hardware; check system log.
boot device: <unknown>
root on wd0a dumps on wd0b
kern.module.path=/stand/prep/8.1/modules