Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-06 15:28:56
From: dovsienko
Description: Ubiquiti Networks EdgeRouter Lite (ERLite-3, E100)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.86 (OCTEON) #0: Fri Jul 2 10:14:07 UTC 2021 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbmips/compile/OCTEON [ 1.000000] Cavium Octeon CN5020-500 [ 1.000000] total memory = 512 MB [ 1.000000] avail memory = 495 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpunode0 at mainbus0: 2 cores, crypto+kasumi, 64bit-mul, unaligned-access ok [ 1.000000] cpu0 at cpunode0 core 0: 500.00MHz [ 1.000000] cpu0: Cavium CN5020-500 (0xd0601) Rev. 1 with software emulated floating point [ 1.000000] cpu0: 64 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size [ 1.000000] cpu0: 32KB/128B 4-way set-associative L1 instruction cache [ 1.000000] cpu0: 16KB/128B 64-way set-associative write-through coherent L1 data cache [ 1.000000] cpu0: 128KB/128B 8-way set-associative write-back L2 unified cache [ 1.000000] cpu1 at cpunode0 core 1: disabled (uniprocessor kernel) [ 1.000000] wdog0 at cpunode0: default period is 4 seconds [ 1.000000] iobus0 at mainbus0 [ 1.000000] iobus0: initializing POW [ 1.000000] iobus0: initializing FPA [ 1.000000] com0 at iobus0 address 0x0001180000000800: ns16650, no ERS, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com at iobus0 address 0x0001180000000c00 not configured [ 1.000000] octrnm0 at iobus0 address 0x0001180040000000 [ 1.000000] entropy: ready [ 1.000000] octtwsi at iobus0 address 0x0001180000001000 not configured [ 1.000000] octmpi at iobus0 address 0x0001070000001000 not configured [ 1.000000] octsmi0 at iobus0 address 0x0001180000001800 [ 1.000000] octpip0 at iobus0 address 0x00011800a0000000 [ 1.000000] octgmx0 at octpip0 [ 1.000000] cnmac0 at octgmx0: address=0x1180008000000: RGMII [ 1.000000] cnmac0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] atphy0 at cnmac0 phy 7: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.000000] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.000000] cnmac1 at octgmx0: address=0x1180008000000: RGMII [ 1.000000] cnmac1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] atphy1 at cnmac1 phy 6: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.000000] atphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.000000] cnmac2 at octgmx0: address=0x1180008000000: RGMII [ 1.000000] cnmac2: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] atphy2 at cnmac2 phy 5: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.000000] atphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.000000] dwctwo0 at iobus0 address 0x0001180068000000 [ 1.000000] dwctwo0: Core Release: 2.65a (snpsid=4f54265a) [ 1.000000] usb0 at dwctwo0: USB revision 2.0 [ 1.000000] bootbus0 at mainbus0 [ 1.000000] timecounter: Timecounter "mips3_cp0_counter" frequency 500000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.009983] aes: BearSSL aes_ct [ 1.009983] aes_ccm: self-test passed [ 1.009983] chacha: Portable C ChaCha [ 1.009983] blake2s: self-test passed [ 1.019975] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.019975] uhub0: 1 port with 1 removable, self powered [ 2.849963] umass0 at uhub0 port 1 configuration 1 interface 0 [ 2.849963] umass0: SanDisk (0x0781) SDDR-B531 (0xcfcb), rev 2.10/29.20, addr 2 [ 2.866791] umass0: using SCSI over Bulk-Only [ 2.866791] scsibus0 at umass0: 2 targets, 1 lun per target [ 2.870040] uhub0: autoconfiguration error: illegal enable change, port 1 [ 2.870040] sd0 at scsibus0 target 0 lun 0: <SanDisk, SDDR-B531, 2920> disk removable [ 3.089962] sd0: fabricating a geometry [ 3.100072] sd0: 59392 MB, 59392 cyl, 64 head, 32 sec, 512 bytes/sect x 121634816 sectors [ 3.109973] sd0: fabricating a geometry [ 3.109973] sd0: 106348544 trailing sectors not covered by disklabel [ 3.122355] WARNING: 1 error while detecting hardware; check system log. [ 3.130329] boot device: sd0 [ 3.130329] sd0: 106348544 trailing sectors not covered by disklabel [ 3.142045] root on sd0a dumps on sd0b [ 3.142045] sd0: 106348544 trailing sectors not covered by disklabel [ 3.154738] sd0: 106348544 trailing sectors not covered by disklabel [ 3.163724] root file system type: ffs [ 3.169977] kern.module.path=/stand/evbmips/9.99.86/modules [ 3.169977] WARNING: no TOD clock present [ 3.180340] WARNING: using filesystem time [ 3.184405] WARNING: CHECK AND RESET THE DATE!