Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-06 15:30:21
From: dovsienko
Description: Ubiquiti Networks EdgeRouter 4 (ER-4, E300)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.86 (OCTEON) #0: Fri Jul 2 10:14:07 UTC 2021 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbmips/compile/OCTEON [ 1.000000] Cavium Octeon CN7130-1000 [ 1.000000] total memory = 1024 MB [ 1.000000] avail memory = 982 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpunode0 at mainbus0: 4 cores, crypto+kasumi, 64bit-mul, unaligned-access ok [ 1.000000] cpu0 at cpunode0 core 0: 1000.00MHz [ 1.000000] cpu0: Cavium CN7130-1000 (0xd9602) Rev. 2 with built-in FPU [ 1.000000] cpu0: 256 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size [ 1.000000] cpu0: 78KB/128B 39-way set-associative L1 instruction cache [ 1.000000] cpu0: 32KB/128B 32-way set-associative write-through coherent L1 data cache [ 1.000000] cpu0: 1024KB/128B 8-way set-associative write-back L2 unified cache [ 1.000000] cpu1 at cpunode0 core 1: disabled (uniprocessor kernel) [ 1.000000] cpu2 at cpunode0 core 2: disabled (uniprocessor kernel) [ 1.000000] cpu3 at cpunode0 core 3: disabled (uniprocessor kernel) [ 1.000000] wdog0 at cpunode0: default period is 4 seconds [ 1.000000] iobus0 at mainbus0 [ 1.000000] iobus0: initializing POW [ 1.000000] iobus0: initializing FPA [ 1.000000] octrnm0 at iobus0 address 0x0001180040000000 [ 1.000000] entropy: ready [ 1.000000] simplebus0 at mainbus0: cavium,ubnt_e300 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] octintc0 at simplebus1: CIU [ 1.000000] octcib0 at simplebus1: CIB [ 1.000000] octintc0: autoconfiguration error: CIU irq 144 (2, 16) out of range [ 1.000000] octcib0: autoconfiguration error: couldn't establish interrupt on CIU irq 144 [ 1.000000] octcib1 at simplebus1: CIB [ 1.000000] octcib1: interrupting on CIU irq 97 [ 1.000000] octcib2 at simplebus1: CIB [ 1.000000] octcib2: interrupting on CIU irq 81 [ 1.000000] octcib3 at simplebus1: CIB [ 1.000000] octintc0: autoconfiguration error: CIU irq 145 (2, 17) out of range [ 1.000000] octcib3: autoconfiguration error: couldn't establish interrupt on CIU irq 145 [ 1.000000] octcib4 at simplebus1: CIB [ 1.000000] octcib4: interrupting on CIU irq 88 [ 1.000000] octcib5 at simplebus1: CIB [ 1.000000] octcib5: interrupting on CIU irq 116 [ 1.000000] octcib6 at simplebus1: CIB [ 1.000000] octcib6: interrupting on CIU irq 127 [ 1.000000] octsmi0 at simplebus1 [ 1.000000] octsmi1 at simplebus1 [ 1.000000] octpip0 at simplebus1 [ 1.000000] octgmx0 at octpip0 [ 1.000000] cnmac0 at octgmx0: address=0x1180008000000: SGMII [ 1.000000] cnmac0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] ukphy0 at cnmac0 phy 4: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2 [ 1.000000] ukphy0: 1000baseT, 1000baseT-FDX, auto [ 1.000000] cnmac1 at octgmx0: address=0x1180008000000: SGMII [ 1.000000] cnmac1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] ukphy1 at cnmac1 phy 5: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2 [ 1.000000] ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] cnmac2 at octgmx0: address=0x1180008000000: SGMII [ 1.000000] cnmac2: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] ukphy2 at cnmac2 phy 6: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2 [ 1.000000] ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] cnmac3 at octgmx0: address=0x1180008000000: SGMII [ 1.000000] cnmac3: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] ukphy3 at cnmac3 phy 7: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2 [ 1.000000] ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] /soc@0/gpio-controller@1070000000800 at simplebus1 not configured [ 1.000000] /gpio-leds at simplebus0 not configured [ 1.000000] /soc@0/bootbus@1180000000000 at simplebus1 not configured [ 1.000000] /soc@0/uctl@118006c000000 at simplebus1 not configured [ 1.000000] xhci0 at simplebus1: DWC3 rev 0x250a [ 1.000000] xhci0: interrupting on octcib1 intr 9 [ 1.000000] xhci0: xHCI version 1.0 [ 1.000000] usb0 at xhci0: USB revision 3.0 [ 1.000000] usb1 at xhci0: USB revision 2.0 [ 1.000000] xhci1 at simplebus1: DWC3 rev 0x250a [ 1.000000] xhci1: interrupting on octcib2 intr 9 [ 1.000000] xhci1: xHCI version 1.0 [ 1.000000] usb2 at xhci1: USB revision 3.0 [ 1.000000] usb3 at xhci1: USB revision 2.0 [ 1.000000] /soc@0/i2c@1180000001000 at simplebus1 not configured [ 1.000000] /soc@0/i2c@1180000001200 at simplebus1 not configured [ 1.000000] com0 at simplebus1: ns16650, no ERS, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com0: interrupting on CIU irq 34 [ 1.000000] com1 at simplebus1: ns16650, no ERS, 16-byte FIFO [ 1.000000] com1: interrupting on CIU irq 35 [ 1.000000] /soc@0/mmc@1180000002000 at simplebus1 not configured [ 1.000000] /soc@0/spi@1070000001000 at simplebus1 not configured [ 1.000000] /soc@0/ocla0@11800A8000000 at simplebus1 not configured [ 1.000000] /soc@0/dma-engine@1180000000100 at simplebus1 not configured [ 1.000000] /soc@0/dma-engine@1180000000108 at simplebus1 not configured [ 1.000000] timecounter: Timecounter "mips3_cp0_counter" frequency 1000000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.000003] uhub0: 1 port with 1 removable, self powered [ 1.000003] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.011803] uhub1: 1 port with 1 removable, self powered [ 1.011803] uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.020844] uhub2: 1 port with 1 removable, self powered [ 1.020844] uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.036487] uhub3: 1 port with 1 removable, self powered [ 1.039996] aes: BearSSL aes_ct [ 1.039996] aes_ccm: self-test passed [ 1.039996] chacha: Portable C ChaCha [ 1.039996] blake2s: self-test passed [ 2.629987] umass0 at uhub0 port 1 configuration 1 interface 0 [ 2.629987] umass0: SanDisk (0x0781) SDDR-B531 (0xcfcb), rev 3.10/29.20, addr 1 [ 2.646221] umass0: using SCSI over Bulk-Only [ 2.646221] scsibus0 at umass0: 2 targets, 1 lun per target [ 2.651966] sd0 at scsibus0 target 0 lun 0: <SanDisk, SDDR-B531, 2920> disk removable [ 2.909987] sd0: fabricating a geometry [ 2.923579] sd0: 59392 MB, 59392 cyl, 64 head, 32 sec, 512 bytes/sect x 121634816 sectors [ 2.931564] sd0: fabricating a geometry [ 2.931564] sd0: 106348544 trailing sectors not covered by disklabel [ 2.944969] WARNING: 4 errors while detecting hardware; check system log. [ 2.952510] boot device: sd0 [ 2.952510] sd0: 106348544 trailing sectors not covered by disklabel [ 2.963635] root on sd0a dumps on sd0b [ 2.963635] sd0: 106348544 trailing sectors not covered by disklabel [ 2.975621] sd0: 106348544 trailing sectors not covered by disklabel [ 2.983989] root file system type: ffs [ 2.983989] kern.module.path=/stand/evbmips/9.99.86/modules [ 2.995347] WARNING: no TOD clock present [ 2.995347] WARNING: using filesystem time [ 3.003426] WARNING: CHECK AND RESET THE DATE!