Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-08 13:39:33
From: Ken Wellsch
Description: FreeBSD 12-stable/sparc64 Sun V215
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE r370058 GENERIC sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 4294967296 (4096 MB)
avail memory = 4178665472 (3985 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "openprom" is Giant locked and may be deleted before FreeBSD 14.0.
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCIe bridge> mem 0x4000f600000-0x4000f6effff,0x4000f410000-0x4000f473fff irq 1983,1982 on nexus0
pcib0: Fire, module-revision 3, IGN 0x1e
Timecounter "pcib0" frequency 188000000 Hz quality 100
pcib0: DVMA map: 0xc0000000 to 0xffffffff 131072 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <OFW PCIe-PCIe bridge> mem 0x100000-0x11ffff at device 0.0 on pci0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCIe-PCIe bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCIe-PCIe bridge> at device 0.0 on pci2
pci3: <OFW PCI bus> on pcib3
pcib4: <OFW PCIe-PCIe bridge> at device 2.0 on pci1
pci4: <OFW PCI bus> on pcib4
pcib5: <OFW PCIe-PCIe bridge> at device 8.0 on pci1
pci5: <OFW PCI bus> on pcib5
pcib6: <OFW PCIe-PCIe bridge> at device 9.0 on pci1
pci6: <OFW PCI bus> on pcib6
pcib7: <OFW PCIe-PCIe bridge> at device 0.0 on pci6
pci7: <OFW PCI bus> on pcib7
pcib8: <OFW PCIe-PCI bridge> at device 8.0 on pci7
pci8: <OFW PCI bus> on pcib8
pcib9: <OFW PCIe-PCIe bridge> at device 10.0 on pci1
pci9: <OFW PCI bus> on pcib9
pcib10: <OFW PCIe-PCIe bridge> at device 0.0 on pci9
pci10: <OFW PCI bus> on pcib10
pcib11: <OFW PCIe-PCI bridge> at device 8.0 on pci10
pci11: <OFW PCI bus> on pcib11
pcib12: <Sun Host-PCIe bridge> mem 0x4000ff00000-0x4000ffeffff,0x4000fc10000-0x4000fc73fff irq 2047,2046 on nexus0
pcib12: Fire, module-revision 3, IGN 0x1f
pcib12: DVMA map: 0xc0000000 to 0xffffffff 131072 entries
pci12: <OFW PCI bus> on pcib12
ebus0: <JBus-EBus bridge> mem 0x4000fc64000-0x4000fc6401f on nexus0
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type memory-controller (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 28.0 on pci3
usbus0 on ohci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000000-0x2000fff at device 28.1 on pci3
usbus1 on ohci1
ehci0: <ALi M5239 USB 2.0 controller> mem 0x200000-0x2000ff at device 28.3 on pci3
usbus2: EHCI version 1.0
usbus2 on ehci0
isab0: <PCI-ISA bridge> at device 30.0 on pci3
isa0: <ISA bus> on isab0
atapci0: <AcerLabs M5229 UDMA133 controller> port 0x1040-0x1047,0x1080-0x1083,0x10c0-0x10c7,0x1100-0x1103,0x1000-0x100f at device 31.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0x10000000-0x1fffffff,0x4000000-0x400ffff at device 0.0 on pci5
bge0: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x20200000-0x2020ffff,0x20010000-0x2001ffff at device 4.0 on pci7
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x20400000-0x2040ffff,0x20030000-0x2003ffff at device 4.1 on pci7
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x20800000-0x2080ffff,0x20610000-0x2061ffff at device 4.0 on pci10
bge2: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus2: <MII bus> on bge2
brgphy2: <BCM5714 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x20a00000-0x20a0ffff,0x20630000-0x2063ffff at device 4.1 on pci10
bge3: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus3: <MII bus> on bge3
brgphy3: <BCM5714 1000BASE-T media interface> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0x20c00000-0x20c03fff,0x20c10000-0x20c1ffff at device 1.0 on pci11
mpt0: MPI Version=1.5.12.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
ebus0: <flashprom> addr 0-0x1fffff (no driver attached)
uart0: <16550 or compatible> addr 0x200000080-0x200000087 irq 1992 on ebus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> addr 0x200000040-0x200000047 irq 1993 on ebus0
ebus0: <rmc-comm> addr 0x200000000-0x200000007 irq 1994 (no driver attached)
ebus0: <gpio> addr 0x2000000c0 (no driver attached)
epic0: <Sun Fire V215/V245 LEDs> addr 0x300000000-0x300000080 on ebus0
ebus0: <power> addr 0x300000040-0x3000000c1 irq 1987 (no driver attached)
nexus0: <i2c> mem 0x4000fd30000-0x4000fd3003f irq 1985 type i2c (no driver attached)
cryptosoft0: <software crypto> on nexus0
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x73 pnpid PNP0b00 on isa0
rtc0: registered as a time-of-day clock, resolution 1.000000s
Timecounter "tick" frequency 1504000000 Hz quality 10
Timecounter "stick" frequency 20000000 Hz quality 10
Event timer "tick" frequency 1504000000 Hz quality 1000
Timecounters tick every 1.000 msec
SMP: AP CPU #1 Launched!
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: ugen0.1: <AcerLabs OHCI root HUB> at usbus0
480Mbps High Speed USB v2.0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <AcerLabs EHCI root HUB> at usbus2
ugen1.1: <AcerLabs OHCI root HUB> at usbus1
uhub1: <AcerLabs EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/da0a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAMuhub0:
3 ports with 3 removable, self powered
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <TEAC DV-W28SLC 1.0C> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub2: da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <HITACHI H101473SCSUN72G SA23> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX] P2VS4MXA
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 70007MB (143374738 512 byte sectors)
3 ports with 3 removable, self powered
da1 at mpt0 bus 0 scbus2 target 1 lun 0
da1: <HITACHI H101473SCSUN72G SA23> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX] P2VTG29A
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 70007MB (143374738 512 byte sectors)
Root mount waiting for: usbus2
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub1: 8 ports with 8 removable, self powered
mountroot: waiting for device /dev/da0a...
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP