Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-08 22:53:40
From: jas
Description: FreeBSD/amd64 on Dell Inc. PowerEdge T130
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p3 #0: Tue Jun 29 19:46:20 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (3000.11-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66635501568 (63548 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1500054057 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000048 [4354] netmap_init netmap: loaded module
[ath_hal] loaded
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
AVAGO MegaRAID SAS FreeBSD mrsas driver version:[_IP_XXXXXXX]-fbsd
mrsas0: <AVAGO Fury SAS Controller> port 0x3000-0x30ff mem 0x92c00000-0x92c0ffff,0x92b00000-0x92bfffff irq 16 at device 0.0 on pci1
mrsas0: FW now in Ready state
mrsas0: Using MSI-X with 4 number of vectors
mrsas0: FW supports <96> MSIX vector,Online CPU 4 Current MSIX <4>
mrsas0: mrsas_init_adapter: sc->reply_q_depth 0x1e0,sc->request_alloc_sz 0x778, sc->reply_alloc_sz 0xf00,sc->io_frames_alloc_sz 0xf100
mrsas0: max sge: 0x46, max chain frame size: 0x400, max fw cmd: 0xef sc->chain_frames_alloc_sz: 0x3bc00
mrsas0: Issuing IOC INIT command to FW.
mrsas0: IOC INIT response received from FW.
mrsas0: System PD created target ID: 0x0
mrsas0: System PD created target ID: 0x1
mrsas0: System PD created target ID: 0x2
mrsas0: FW supports: UnevenSpanSupport=1
mrsas0: max_fw_cmds: 239 max_scsi_cmds: 223
mrsas0: MSI-x interrupts setup success
mrsas0: mrsas_ocr_thread
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.2 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x92d00000-0x92d0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x92d14000-0x92d15fff,0x92d17000-0x92d170ff,0x92d16000-0x92d167ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a30000-0x92a3ffff,0x92a40000-0x92a4ffff,0x92a50000-0x92a5ffff irq 16 at device 0.0 on pci3
bge0: APE FW version: NCSI v1.4.26.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a00000-0x92a0ffff,0x92a10000-0x92a1ffff,0x92a20000-0x92a2ffff irq 17 at device 0.1 on pci3
bge1: APE FW version: NCSI v1.4.26.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 29.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 on pci6
pci7: <PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92800000-0x92803fff,0x92000000-0x927fffff irq 18 at device 0.0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff,0xed800-0xf17ff pnpid ORM0000 on isa0
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mrsas0: Disestablish mrsas intr hook
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0
ses0 at ahciem0 bus 0 scbus8 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: pass3,cd0 in 'Slot 04', SATA Slot: scbus6 target 0
cd0 at ahcich4 bus 0 scbus6 target 0 lun 0
cd0: <PLDS DVD+-RW DU-8A5LH 6D5M> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da2 at mrsas0 bus 1 scbus1 target 2 lun 0
da2: <ATA SanDisk SDSSDA24 30RL> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXX]
da2: 150.000MB/s transfers
da2: 228936MB (468862128 512 byte sectors)
da0 at mrsas0 bus 1 scbus1 target 0 lun 0
da0: <ATA HUS722T2TALA600 MU03> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 150.000MB/s transfers
da0: 1907729MB (3907029168 512 byte sectors)
da1 at mrsas0 bus 1 scbus1 target 1 lun 0
da1: <ATA ST2000NM0018-2F3 EA04> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 150.000MB/s transfers
da1: 1907729MB (3907029168 512 byte sectors)
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <no manufacturer Gadget USB HUB> at usbus0
uhub1 on uhub0
uhub1: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0
uhub1: 6 ports with 6 removable, self powered
ugen0.3: <American Power Conversion Smart-UPS 1000 XL FW:681.18.I USB FW:11.03> at usbus0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0x2ffff03000-0x2ffff03fff irq 18 at device 20.2 on pci0
ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xefa0-0xefbf mem 0x2ffff00000-0x2ffff000ff irq 16 at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
bge0: link state changed to DOWN
bge1: link state changed to DOWN
bge0: link state changed to UP