Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-07-16 05:44:23
From: moiseev
Description: FreeBSD/amd64 on Supermicro PDSM4
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p3 #0: Tue Jun 29 19:46:20 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.42-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8284209152 (7900 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1
Timecounter "TSC-low" frequency 1333207940 Hz quality 1000
KTLS: Initialized 2 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000056 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: <PTLTD RSDT>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
Firmware Error (ACPI): Could not resolve symbol [\134_SB.BCMD], AE_NOT_FOUND (20201113/psargs-503)
ACPI Error: Aborting method \134_PR.CPU0._OSC due to previous error (AE_NOT_FOUND) (20201113/psparse-689)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.BCMD], AE_NOT_FOUND (20201113/psargs-503)
ACPI Error: Aborting method \134_PR.CPU0._OSC due to previous error (AE_NOT_FOUND) (20201113/psparse-689)
ACPI Error: Aborting method \134_PR.CPU0._PDC due to previous error (AE_NOT_FOUND) (20201113/psparse-689)
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec 29320ALP Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xe8200000-0xe8201fff irq 52 at device 3.0 on pci3
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection> port 0x3000-0x301f mem 0xe8000000-0xe801ffff irq 16 at device 0.0 on pci5
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection> port 0x4000-0x401f mem 0xe8300000-0xe831ffff irq 17 at device 0.0 on pci6
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe8700000-0xe87003ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem 0xe0000000-0xe7ffffff,0xe8400000-0xe840ffff irq 16 at device 4.0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18a0-0x18af at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub0 on usbus4
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1 on usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2 on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub3 on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub4 on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus4
Root mount waiting for: CAM usbus4
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at ahd0 bus 0 scbus0 target 1 lun 0
da0: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
da0: Command Queueing enabled
da0: 140272MB (287277984 512 byte sectors)
da1 at ahd0 bus 0 scbus0 target 2 lun 0
da1: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
da1: Command Queueing enabled
da1: 140272MB (287277984 512 byte sectors)
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x1100-0x111f irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
em0: link state changed to UP