Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-16 05:46:24
From: moiseev
Description: FreeBSD/amd64 on
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p3 #0: Tue Jun 29 19:46:20 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2593.56-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 6181142528 (5894 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <INTEL DP43BF >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
Timecounter "TSC-low" frequency 1296777631 Hz quality 1000
KTLS: Initialized 2 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000056 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: <INTEL DP43BF>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xe1000000-0xe1ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe0ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0e0-0xf0ff irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0c0-0xf0df irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf0a0-0xf0bf irq 18 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe2303000-0xe23033ff irq 18 at device 26.7 on pci0
usbus3: waiting for BIOS to give up control
usbus3: timed out waiting for BIOS
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0xe040-0xe047,0xe030-0xe033,0xe020-0xe027,0xe010-0xe013,0xe000-0xe00f mem 0xe2200000-0xe22001ff irq 16 at device 0.0 on pci2
ata2: <ATA channel> at channel 0 on atapci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib6: Data Link Layer inactive
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib7
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xe2100000-0xe210ffff irq 17 at device 0.0 on pci3
bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57780 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf060-0xf07f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe2302000-0xe23023ff irq 23 at device 29.7 on pci0
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf020-0xf03f mem 0xe2301000-0xe23017ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub0 on usbus1
uhub1 on usbus7
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub2 on usbus6
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub4 on usbus4
uhub5 on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub6 on usbus0
uhub7 on usbus3
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 CAM usbus4 usbus5 usbus6 usbus7
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD1003FBYZ-010FB0 01.01V03> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus2 target 0
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD1003FBYZ-010FB0 01.01V03> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub1: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <vendor 0x0557 product 0x8021> at usbus1
uhub8 on uhub0
uhub8: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus1
uhub8: 4 ports with 4 removable, self powered
ugen1.3: <SIGMACH1P USB Keykoard> at usbus1
ukbd0 on uhub8
ukbd0: <SIGMACH1P USB Keykoard, class 0/0, rev 1.10/1.10, addr 3> on usbus1
kbd2 at ukbd0
ugen1.4: <Logitech USB Optical Mouse> at usbus1
ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0xf000-0xf01f mem 0xe2300000-0xe23000ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
uhid0 on uhub8
uhid0: <SIGMACH1P USB Keykoard, class 0/0, rev 1.10/1.10, addr 3> on usbus1
ums0 on uhub8
ums0: <SIGMACH1P USB Keykoard, class 0/0, rev 1.10/1.10, addr 3> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
ums1 on uhub8
ums1: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 4> on usbus1
ums1: 8 buttons and [XYZT] coordinates ID=0