NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2021-07-19 16:45:41
From: Jason Thorpe
Description: NetBSD/alpha 9.99.86 in qemu-system-alpha, full automated boot

the-ripe-vessel:thorpej 18$ ./netbsd-alpha  
WARNING: Image format was not specified for 'disk0.raw' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
WARNING: Image format was not specified for 'disk1.raw' and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the 'raw' format explicitly to remove the restrictions.
PCI: 0:1:0 class 0300 id 1013:00b8
PCI:   region 0 (BAR 10): 10000000
PCI:   region 1 (BAR 14): 12000000
PCI: 0:2:0 class 0200 id 8086:100e
PCI:   region 0 (BAR 10): 12020000
PCI:   region 1 (BAR 14): 0000c000
PCI:   intr pin 1 -> irq 12
PCI: 0:3:0 class 0101 id 1095:0646
PCI:   region 0 (BAR 10): 0000c040
PCI:   region 1 (BAR 14): 0000c048
PCI:   region 2 (BAR 18): 0000c050
PCI:   region 3 (BAR 1c): 0000c058
PCI:   region 4 (BAR 20): 0000c060
PCI:   intr pin 1 -> irq 16
PCI: 0:7:0 class 0601 id 8086:0484
[   1.0000000] [ Kernel symbol table missing! ]
[   1.0000000] consinit: not using prom console
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.86 (GENERIC-$Revision: 1.412 $) #178: Mon Jul 19 09:28:09 PDT 2021
[   1.0000000]  thorpej@the-ripe-vessel:/space/src/sys/arch/alpha/compile/GENERIC.QEMU
[   1.0000000] 6600 family, unknown model variation 0x1400, 250MHz, s/n QEMU
[   1.0000000] 8192 byte page size, 2 processors.
[   1.0000000] total memory = 2048 MB
[   1.0000000] (120 KB reserved for PROM, 2047 MB used by NetBSD)
[   1.0000000] avail memory = 2007 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67)
[   1.0000000] cpu0: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX>
[   1.0000000] cpu1 at mainbus0: ID 1, 21264A-0 (EV67)
[   1.0000000] cpu1: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX>
[   1.0000000] qemu0 at mainbus0: Qemu virtual machine services
[   1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
[   1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes
[   1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0
[   1.0000030] tsp0 at tsc0
[   1.0000030] pci0 at tsp0 bus 0
[   1.0000030] vga0 at pci0 dev 1 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
[   1.0000030] wsdisplay1 at vga0 kbdmux 1
[   1.0000030] drm at vga0 not configured
[   1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
[   1.0000030] wm0: interrupting at dec 6600 irq 12
[   1.0000030] wm0: Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
[   1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07)
[   1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independant
[   1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt
[   1.0000030] atabus0 at cmdide0 channel 0
[   1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independant
[   1.0000030] cmdide0: secondary channel ignored (disabled)
[   1.0000030] sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x03)
[   1.0000030] isa0 at sio0
[   1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO
[   1.0000030] com0: console
[   1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO
[   1.0000030] pckbc0 at isa0 port 0x60-0x64
[   1.0000030] pckbd0 at pckbc0 (kbd slot)
[   1.0000030] pckbc0: using irq 1 for kbd slot
[   1.0000030] wskbd0 at pckbd0 mux 1
[   1.0000030] pms0 at pckbc0 (aux slot)
[   1.0000030] pckbc0: using irq 12 for aux slot
[   1.0000030] wsmouse0 at pms0 mux 0
[   1.0000030] attimer0 at isa0 port 0x40-0x43
[   1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[   1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[   1.0000030] tsciic0 at tsc0
[   1.0000030] iic0 at tsciic0: I2C bus
[   1.0000030] entropy: WARNING: extracting entropy too early
[   1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock.
[   1.3566257] wd0 at atabus0 drive 0
[   1.3566257] wd0: <QEMU HARDDISK>
[   1.3566257] wd0: 8192 MB, 16644 cyl, 16 head, 63 sec, 512 bytes/sect x 16777216 sectors
[   1.3566257] wd1 at atabus0 drive 1
[   1.3566257] wd1: <QEMU HARDDISK>
[   1.3566257] wd1: 8192 MB, 16644 cyl, 16 head, 63 sec, 512 bytes/sect x 16777216 sectors
[   1.3566257] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
[   1.8106934] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
[   1.8333861] root on wd0a dumps on wd0b
[   1.8333861] root file system type: ffs
[   1.8333861] kern.module.path=/stand/alpha/9.99.86/modules
Mon Jul 19 09:28:54 PDT 2021
Starting root file system check:
/dev/rwd0a: file system is clean; not checking
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
/dev/rwd1c: file system is clean; not checking
rndctl: no entropy in seed
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 1
Starting network.
Hostname: alpha-vm
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Starting mdnsd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting sshd.
Starting inetd.
Starting cron.
Mon Jul 19 09:29:00 PDT 2021

NetBSD/alpha (alpha-vm) (constty)

login: 

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.