Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-22 16:41:11
From: admin
Description: FreeBSD/amd64 on Latitude E5410
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p3 #2 releng/13.0-n244752-b368bb75bad: Wed Jul 21 11:56:08 -03 2021
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (2394.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3905851392 (3724 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL E2 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1197029980 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000055 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: <DELL E2 >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x8080-0x8087 mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel Ironlake (M) SVGA controller> on vgapci0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0.
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf7d50000-0xf7d503ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Ibex Peak HDA Controller> mem 0xf7d40000-0xf7d43fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci1: <ACPI PCI bus> on pcib2
bwn_pci0: <Broadcom BCM43224 802.11n Dual-Band Wireless> mem 0xf5500000-0xf5503fff irq 17 at device 0.0 on pci1
bhndb0: <PCI-BHND bridge> on bwn_pci0
bhndb0: Using MSI interrupts on bwn_pci0
bhnd0: <BCM43224 BCMA bus> on bhndb0
bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 34> mem 0x18000000-0x18000fff,0x18100000-0x18100fff irq 0 at core 0 on bhnd0
bhnd_nvram0: <SPROM/OTP> mem 0x18000800-0x18000bff on bhnd_chipc0
bhnd_pmu0: <Broadcom ChipCommon PMU, rev 6> on bhnd_chipc0
gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000fff on bhnd_chipc0
bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 15> mem 0x18002000-0x18002fff,0x8000000-0xfffffff,0x8000000000000000-0xffffffffffffffff,0x18102000-0x18102fff,0x18103000-0x18103fff irq 2 at core 2 on bhnd0
bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 23> mem 0x18001000-0x18001fff,0x18101000-0x18101fff irq 1 at core 1 on bhnd0
bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support
bwn0: failed
device_attach: bwn0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: failed to allocate initial memory window: 0xf0400000-0xf2cfffff
pci2: <ACPI PCI bus> on pcib3
cbb0: <PCI-CardBus Bridge> mem 0xf2c40000-0xf2c40fff irq 18 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pccard0: Obsolete code will be removed soon: PC Card to be removed.
sdhci_pci0: <RICOH R5CE822 SD> mem 0xf2c30000-0xf2c300ff irq 19 at device 0.1 on pci2
sdhci_pci0: 1 slot(s) allocated
fwohci0: <1394 Open Host Controller Interface> mem 0xf2c00000-0xf2c007ff irq 16 at device 0.4 on pci2
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:c0:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5761100> mem 0xf2d10000-0xf2d1ffff,0xf2d00000-0xf2d0ffff irq 17 at device 0.0 on pci3
bge0: CHIP ID 0x05761100; ASIC REV 0x5761; CHIP REV 0x57611; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5761 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf7d30000-0xf7d303ff irq 17 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Ibex Peak-M AHCI SATA controller> port 0x8070-0x8077,0x8060-0x8063,0x8050-0x8057,0x8040-0x8043,0x8020-0x803f mem 0xf7d20000-0xf7d207ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib7: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib7
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model Generic PS/2 mouse, device ID 0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <IDT 92HD81B1X HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD81B1X Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD81B1X (Analog 2.0+HP/2.0)> at nid 13,11 and 10,15 on hdaa0
pcm1: <IDT 92HD81B1X (Analog)> at nid 14 and 17 on hdaa0
hdacc1: <Intel Ibex Peak HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Ibex Peak Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 4 on hdaa1
pcm3: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 5 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0Root mount waiting for: usbus0 CAM usbus1
on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus0 CAM usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0020> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0020> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0 CAM usbus1
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST9250410AS D005SDM1> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ses0: ada0 in 'Slot 00', SATA Slot: scbus1 target 0
ses0: cd0,pass1 in 'Slot 01', SATA Slot: scbus2 target 0
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-7585H KD03> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ugen1.3: <USB USB Keyboard> at usbus1
ukbd0 on uhub2
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus1
ugen1.4: <vendor 0x18f8 USB OPTICAL MOUSE> at usbus1
ukbd1 on uhub2
ukbd1: <vendor 0x18f8 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 4> on usbus1
kbd3 at ukbd1
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
Successfully added WC MTRR for [0xe0000000-0xefffffff]: 0;
[drm] Got stolen memory base 0xde000000, size 0x2000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector VGA-1: get mode from tunables:
[drm] - kern.vt.fb.modes.VGA-1
[drm] - kern.vt.fb.default_mode
[drm] Connector eDP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.eDP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] RC6 disabled, disabling runtime PM support
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=768 width=1280 depth=32
cmsize=16 size=4403200
pbase=0xe000e000 vbase=0xfffff800e000e000
name=drmn0 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: i915drmfb frame buffer device
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
KLD sysctlbyname_improved.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/modules/sysctlbyname_improved.ko - unsupported file type
KLD sysctlinfo.ko: depends on kernel - not available or version mismatch
linker_load_file: /boot/modules/sysctlinfo.ko - unsupported file type
acpi_video0: <ACPI video extension> on vgapci0
ichsmb0: <Intel PCH SMBus controller> port 0x8000-0x801f mem 0xf7d10000-0xf7d100ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
uhid0 on uhub2
uhid0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus1
ums0 on uhub2
ums0: <vendor 0x18f8 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 4> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=1