Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-07-26 20:36:12
From: jramstedt
Description: NetBSD/alpha 9.99.87 on Digital AlphaPC 164LX
CPU 0 booting
Resetting I/O buses...
(boot dka300.3.0.7.0 -flags A)
block 0 of dka300.3.0.7.0 is a valid boot block
reading 13 blocks from dka300.3.0.7.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1a00
initializing HWRPB at 2000
initializing page table at 3ffec000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 9.99.87 FFS Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 9.99.87 Secondary Bootstrap, Revision 1.13 (Sun Jul 25 22:43:08 UTC 2021)
VMS PAL rev: 0x1000200010115
OSF PAL rev: 0x1000200020117
Switch to OSF PAL code succeeded.
Boot flags: A
13163776+233888 [645336+419176]=0xdcb448
Entering netbsd at 0xfffffc0000a014b0...
[ 1.0000000] consinit: not using prom console
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.87 (GENERIC) #0: Sun Jul 25 22:43:08 UTC 2021
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
[ 1.0000000] Digital AlphaPC 164LX 666 MHz, s/n
[ 1.0000000] 8192 byte page size, 1 processor.
[ 1.0000000] total memory = 1024 MB
[ 1.0000000] (2136 KB reserved for PROM, 1021 MB used by NetBSD)
[ 1.0000000] avail memory = 994 MB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21164A-2 (EV56)
[ 1.0000000] cpu0: Architecture extensions: 0x1<BWX>
[ 1.0000000] cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 2
[ 1.0000000] cia0: extended capabilities: 0x1<BWEN>
[ 1.0000000] cia0: using BWX for PCI config access
[ 1.0000000] pci0 at cia0 bus 0
[ 1.0000000] bge0 at pci0 dev 6 function 0: Broadcom BCM5703 Gigabit Ethernet
[ 1.0000000] bge0: interrupting at eb164 irq 0
[ 1.0000000] bge0: HW config 00010055, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5702/5703 B0 (0x1100), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 3
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] ahc0 at pci0 dev 7 function 0: Adaptec 3960D Ultra160 SCSI adapter
[ 1.0000000] ahc0: interrupting at eb164 irq 1
[ 1.0000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[ 1.0000000] ahc1 at pci0 dev 7 function 1: Adaptec 3960D Ultra160 SCSI adapter
[ 1.0000000] ahc1: interrupting at eb164 irq 8
[ 1.0000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[ 1.0000000] sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (rev. 0x43)
[ 1.0000000] pm3fb0 at pci0 dev 9 function 0: 3D Labs GLINT Permedia 3 (rev. 0x01)
pm3fb0: no width property
pm3fb0: no height property
pm3fb0: no depth property
[ 1.0000000] pm3fb0: 16 MB aperture at 0x88000000
[ 1.0000000] no data for est. mode 640x480x67
[ 1.0000000] pm3fb0: pm3 using 1600 x 1200 in 8 bit, stride 1600
[ 1.0000000] wsdisplay1 at pm3fb0 kbdmux 1
[ 1.0000000] cmdide0 at pci0 dev 11 function 0: CMD Technology PCI0646 (rev. 0x01)
[ 1.0000000] cmdide0: primary channel wired to compatibility mode, channel non-independant
[ 1.0000000] cmdide0: primary channel interrupting at isa irq 14
[ 1.0000000] atabus0 at cmdide0 channel 0
[ 1.0000000] cmdide0: secondary channel wired to compatibility mode, channel non-independant
[ 1.0000000] cmdide0: secondary channel interrupting at isa irq 15
[ 1.0000000] atabus1 at cmdide0 channel 1
[ 1.0000000] isa0 at sio0
[ 1.0000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7
[ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO
[ 1.0000000] pckbc0 at isa0 port 0x60-0x64
[ 1.0000000] pckbd0 at pckbc0 (kbd slot)
[ 1.0000000] pckbc0: using irq 1 for kbd slot
[ 1.0000000] wskbd0 at pckbd0 mux 1
[ 1.0000000] pms0 at pckbc0 (aux slot)
[ 1.0000000] pckbc0: using irq 12 for aux slot
[ 1.0000000] wsmouse0 at pms0 mux 0
[ 1.0000000] attimer0 at isa0 port 0x40-0x43
[ 1.0000000] pcppi0 at isa0 port 0x61
[ 1.0000000] spkr0 at pcppi0: PC Speaker
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] midi0 at pcppi0: PC speaker
[ 1.0000000] isabeep0 at pcppi0
[ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[ 1.0000000] attimer0: attached to pcppi0
[ 1.0000000] entropy: WARNING: extracting entropy too early
[ 1.0010997] scsibus0: waiting 2 seconds for devices to settle...
[ 1.0709321] scsibus1: waiting 2 seconds for devices to settle...
[ 1.2823419] atapibus0 at atabus0: 2 targets
[ 1.3380095] cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22LP20, , 1.04> cdrom removable
[ 3.5401298] sd0 at scsibus0 target 1 lun 0: <COMPAQ, BD07289BB8, HPB1> disk fixed
[ 3.6309484] sd0: 69464 MB, 78753 cyl, 2 head, 903 sec, 512 bytes/sect x 142264000 sectors
[ 3.7305570] sd0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing
[ 3.8321230] sd1 at scsibus0 target 2 lun 0: <COMPAQ, BD0728A4B4, HPBC> disk fixed
[ 3.9229406] sd1: 69464 MB, 81782 cyl, 2 head, 869 sec, 512 bytes/sect x 142264000 sectors
[ 4.0205952] sd1: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing
[ 4.1260634] sd2 at scsibus0 target 3 lun 0: <IBM-ESXS, ST336732LC FN, B84G> disk fixed
[ 4.2256697] sd2: 34715 MB, 18496 cyl, 8 head, 480 sec, 512 bytes/sect x 71096640 sectors
[ 4.3262535] sd2: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
[ 11.0976924] sd1: NetBSD disk label corrupted
[ 11.1475790] sd1: NetBSD disk label corrupted
[ 11.2070597] WARNING: 3 errors while detecting hardware; check system log.
[ 11.2871354] root on sd2a dumps on sd2b
[ 11.3388882] root file system type: ffs
[ 11.3828415] kern.module.path=/stand/alpha/9.99.87/modules
Fri Jul 26 23:21:21 EEST 2069
Starting root file system check:
/dev/rsd2a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd2b
swapctl: adding /dev/sd2b as swap device at priority 0
Starting file system checks:
rndctl: no entropy in seed
Setting tty flags.
Starting network.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd2b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting sshd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Starting postfix.
Jul 26 23:21:34 postfix[1132]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Fri Jul 26 23:21:35 EEST 2069
NetBSD/alpha (Amnesiac) (constty)
login: