Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-30 23:49:07
From: Jason Thorpe
Description: NetBSD/alpha 9.99.87 in qemu-system-alpha with VirtIO
WARNING: Image format was not specified for 'disk0.raw' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:4:0 class 0100 id 1af4:1004 PCI: region 0 (BAR 10): 0000c080 PCI: region 4 (BAR 20): 12040000 PCI: intr pin 1 -> irq 20 PCI: 0:7:0 class 0601 id 8086:0484 [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] consinit: not using prom console [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.87 (GENERIC-$Revision: 1.413 $) #184: Fri Jul 30 11:12:20 PDT 2021 [ 1.0000000] thorpej@the-ripe-vessel:/space/src/sys/arch/alpha/compile/GENERIC.QEMU [ 1.0000000] 6600 family, unknown model variation 0x1400, 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 2 processors. [ 1.0000000] total memory = 2048 MB [ 1.0000000] (120 KB reserved for PROM, 2047 MB used by NetBSD) [ 1.0000000] avail memory = 2007 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX> [ 1.0000000] cpu1 at mainbus0: ID 1, 21264A-0 (EV67) [ 1.0000000] cpu1: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX> [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: Cirrus Logic CL-GD5446 (rev. 0x00) [ 1.0000030] wsdisplay1 at vga0 kbdmux 1 [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independant [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independant [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] virtio0 at pci0 dev 4 function 0 [ 1.0000030] virtio0: SCSI device (rev. 0x00) [ 1.0000030] vioscsi0 at virtio0: features: 0x10000000<INDIRECT_DESC> [ 1.0000030] vioscsi0: cmd_per_lun 128 qsize 256 seg_max 254 max_target 255 max_lun 16383 [ 1.0000030] virtio0: interrupting at dec 6600 irq 20 [ 1.0000030] scsibus0 at vioscsi0: 16 targets, 1024 luns per target [ 1.0000030] sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 mux 1 [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 mux 0 [ 1.0000030] attimer0 at isa0 port 0x40-0x43 [ 1.0000030] pcppi0 at isa0 port 0x61 [ 1.0000030] spkr0 at pcppi0: PC Speaker [ 1.0000030] wsbell at spkr0 not configured [ 1.0000030] midi0 at pcppi0: PC speaker [ 1.0000030] isabeep0 at pcppi0 [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] attimer0: attached to pcppi0 [ 1.0000030] tsciic0 at tsc0 [ 1.0000030] iic0 at tsciic0: I2C bus [ 1.0000030] entropy: WARNING: extracting entropy too early [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.4176639] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.4176639] sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 2.5+> disk fixed [ 1.4176639] sd0: 8192 MB, 16383 cyl, 16 head, 64 sec, 512 bytes/sect x 16777216 sectors [ 1.4176639] sd0: async, 8-bit transfers, tagged queueing [ 1.8141081] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.8342819] root on sd0a dumps on sd0b [ 1.8342819] root file system type: ffs [ 1.8342819] kern.module.path=/stand/alpha/9.99.87/modules Fri Jul 30 16:45:32 PDT 2021 [ 2.4140731] stray dec 6600 irq 20 Starting root file system check: [ 2.6780633] stray dec 6600 irq 20 /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: rndctl: no entropy in seed Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 1 Starting network. Hostname: alpha-vm IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Starting dhcpcd. Starting mdnsd. Building databases: dev, utmp, utmpx. Starting syslogd. Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting sshd. Starting inetd. Starting cron. Fri Jul 30 16:45:39 PDT 2021 NetBSD/alpha (alpha-vm) (constty) login: