Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-07-31 20:15:21
From: tsutsui
Description: NetBSD/amd64 9.2 on DELL Optiplex 760
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8125 MB
avail memory = 7866 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x11<memory_size>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. OptiPlex 760
mainbus0 (root)
ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL )
ACPI: XSDT 0x00000000000FC924 000084 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: FACP 0x00000000000FCA4C 0000F4 (v03 DELL B10K 00000015 ASL 00000061)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190405/tbfadt-642)
ACPI: DSDT 0x00000000FFF20BAB 005655 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 0x00000000BFDFFC00 000040
ACPI: SSDT 0x00000000FFF264D8 00009A (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 0x00000000000FCB40 000092 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: BOOT 0x00000000000FCBD2 000028 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ASF! 0x00000000000FCBFA 000096 (v32 DELL B10K 00000015 ASL 00000061)
ACPI: MCFG 0x00000000000FCC90 00003C (v01 DELL B10K 00000015 ASL 00000061)
ACPI: HPET 0x00000000000FCCCC 000038 (v01 DELL B10K 00000015 ASL 00000061)
Firmware Warning (ACPI): Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20190405/tbprint-233)
ACPI: TCPA 0x00000000000FCF28 000032 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SLIC 0x00000000000FCD04 000176 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SSDT 0x00000000BFDFFC40 0001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 0x00000000BFE00049 0001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 0x00000000BFE00452 000190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, id 0x10676
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, id 0x10676
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <DELL , B10K ,00000015>, AslId <ASL ,00000061>
ACPI Warning: \_SB.PCI0.PCI2._PRT: Return Package has no elements (empty) (20190405/nsprepkg-144)
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button
MBIO (PNP0C01) at acpi0 not configured
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
ACPI: Enabled 2 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2e10 (rev. 0x03)
agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 2e11 (rev. 0x03)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 1002 product 68f9 (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
wm0 at pci0 dev 25 function 0: 82567LM-3 LAN Controller (rev. 0x02)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.5.3
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x2a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a67 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a68 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a69 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a6c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi2 vec 0
hdafg1 at hdaudio1: vendor 11d4 product 194a
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: ADC02 2ch: Line In [Jack]
hdafg1: DAC03 2ch: HP Out [Jack]
hdafg1: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb1 at pci0 dev 28 function 0: vendor 8086 product 3a70 (rev. 0x02)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 3a72 (rev. 0x02)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a64 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a65 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a66 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a6a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a1a (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3a02 (rev. 0x02)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xe3209f65<SXS,EMS,PMD,ISS=0x2=Gen2,SCLO,SAL,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3a60 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x4a100000 rev 0x4e
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 1 us, pow 500 mW
acpicpu0: C3: I/O, lat 57 us, pow 100 mW
acpicpu0: P0: FFH, lat 10 us, pow 89000 mW, 3000 MHz
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 2667 MHz
acpicpu0: P2: FFH, lat 10 us, pow 66000 mW, 2333 MHz
acpicpu0: P3: FFH, lat 10 us, pow 56000 mW, 2000 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <TOSHIBA MD03ACA200>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp DVD+/-RW TS-L633C, R4966GFS816314, DW10> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.2/modules
kern info: [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340).
kern info: [drm] register mmio base: 0xf7de0000
kern info: [drm] register mmio size: 131072
kern info: ATOM BIOS: 113
radeon0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon0: info: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
kern info: [drm] Detected VRAM RAM=400M, BAR=256M
kern info: [drm] RAM width 64bits DDR
Zone kernel: Available graphics memory: 2600742 kiB
Zone dma32: Available graphics memory: 2097152 kiB
kern info: [drm] radeon: 1024M of VRAM memory ready
kern info: [drm] radeon: 1024M of GTT memory ready.
kern info: [drm] Loading CEDAR Microcode
WARNING: clock gained 26 days
kern info: [drm] Internal thermal controller with fan control
kern info: [drm] radeon: dpm initialized
kern info: [drm] GART: num cpu pages 262144, num gpu pages 262144
kern info: [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xffff8148e3e77c00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xffff8148e3e77c0c
radeon0: info: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xffffa000ae7dc418
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
radeon0: info: radeon: MSI limited to 32-bit
radeon0: interrupting at ioapic0 pin 16 (radeon0)
kern info: [drm] radeon: irq initialized.
kern info: [drm] ring test on 0 succeeded in 1 usecs
kern info: [drm] ring test on 3 succeeded in 3 usecs
kern info: [drm] ring test on 5 succeeded in 1 usecs
kern info: [drm] UVD initialized successfully.
kern info: [drm] ib test on ring 0 succeeded in 0 usecs
kern info: [drm] ib test on ring 3 succeeded in 0 usecs
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: WiseGroup.,Ltd (0x925) JC-PS101U (0x8888), rev 1.10/3.00, addr 2, iclass 3/0
uhid0 at uhidev0: input=6, output=3, feature=0
kern info: [drm] ib test on ring 5 succeeded
kern info: [drm] Radeon Display Connectors
kern info: [drm] Connector 0:
kern info: [drm] HDMI-A-1
kern info: [drm] HPD1
kern info: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
kern info: [drm] Encoders:
kern info: [drm] DFP1: INTERNAL_UNIPHY1
kern info: [drm] Connector 1:
kern info: [drm] DVI-I-1
kern info: [drm] HPD4
kern info: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
kern info: [drm] Encoders:
kern info: [drm] DFP2: INTERNAL_UNIPHY
kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
kern info: [drm] Connector 2:
kern info: [drm] VGA-1
kern info: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
kern info: [drm] Encoders:
kern info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
radeondrmkmsfb0 at radeon0
radeondrmkmsfb0: framebuffer at 0xffffa000aee02000, size 1920x1200, depth 32, stride 7680
hdafg0: ELD version=0x16,len=172,edid=0x0,port=0x4,vendor=0xc5e8,product=0x376c
hdafg0: Monitor = ''
hdafg0: SAD id=0,format=0,channels=1,rate=0x00,maxbitrate=0
hdafg0: SAD id=1,format=0,channels=1,rate=0x44,maxbitrate=1224000
hdafg0: SAD id=2,format=4,channels=5,rate=0x80,maxbitrate=2040000
hdafg0: SAD id=3,format=15,channels=8,rate=0xff,maxbitrate=2040000
hdafg0: SAD id=4,format=2,channels=5,rate=0x66,maxbitrate=344000
hdafg0: SAD id=5,format=5,channels=7,rate=0x00,maxbitrate=1280000
hdafg0: SAD id=6,format=15,channels=8,rate=0xff,maxbitrate=1152000
hdafg0: SAD id=7,format=8,channels=2,rate=0xbf,maxbitrate=1816000
hdafg0: SAD id=8,format=9,channels=1,rate=0x81,maxbitrate=2040000
hdafg0: SAD id=9,format=15,channels=8,rate=0x00,maxbitrate=0
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 0
uhidev1: Logitech (0x46d) USB Laser Mouse (0xc062), rev 2.00/31.00, addr 2, iclass 3/1
ums0 at uhidev1: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 2 configuration 1 interface 0
uhidev2: Lenovo (0x17ef) ThinkPad Compact USB Keyboard with TrackPoint (0x6047), rev 2.00/3.30, addr 3, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub1 port 2 configuration 1 interface 1
uhidev3: Lenovo (0x17ef) ThinkPad Compact USB Keyboard with TrackPoint (0x6047), rev 2.00/3.30, addr 3, iclass 3/1
uhidev3: 22 report ids
ums1 at uhidev3 reportid 1: 5 buttons, W and Z dirs
wsmouse1 at ums1 mux 0
uhid1 at uhidev3 reportid 16: input=2, output=0, feature=0
uhid2 at uhidev3 reportid 17: input=2, output=0, feature=0
uhid3 at uhidev3 reportid 19: input=8, output=8, feature=8
uhid4 at uhidev3 reportid 21: input=2, output=0, feature=0
uhid5 at uhidev3 reportid 22: input=2, output=0, feature=0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)