Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-08-06 23:11:11
From: roller
Description: FreeBSD/amd64 on To be filled by O.E.M. To be filled by O.E.M.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD FX(tm)-6300 Six-Core Processor (3792.86-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8160854016 (7782 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 2 3 4 5
Timecounter "TSC-low" frequency 1896430587 Hz quality 1000
KTLS: Initialized 6 threads
Cuse v0.1.36 @ /dev/cuse
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000058 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfe500000-0xfe5001ff irq 44 at device 0.0 on pci2
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe400000-0xfe4001ff irq 46 at device 0.0 on pci3
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 48 at device 0.0 on pci4
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci7
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfe080000-0xfe083fff irq 41 at device 0.1 on pci7
ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe60b000-0xfe60b3ff irq 19 at device 17.0 on pci0
ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich4: <AHCI channel> at channel 0 on ahci2
ahcich8: <AHCI channel> at channel 4 on ahci2
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe60a000-0xfe60afff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe609000-0xfe6090ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe608000-0xfe608fff irq 20 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe607000-0xfe6070ff irq 21 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfe600000-0xfe603fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib8
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe606000-0xfe606fff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci10: <ACPI PCI bus> on pcib10
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 21 at device 0.0 on pci10
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci11: <ACPI PCI bus> on pcib11
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 22 at device 0.0 on pci11
xhci1: 32 bytes context size, 64-bit DMA
usbus6 on xhci1
usbus6: 5.0Gbps Super Speed USB v3.0
pcib12: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci12: <ACPI PCI bus> on pcib12
xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe100000-0xfe107fff irq 23 at device 0.0 on pci12
xhci2: 32 bytes context size, 64-bit DMA
usbus7 on xhci2
usbus7: 5.0Gbps Super Speed USB v3.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe605000-0xfe605fff irq 22 at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe604000-0xfe6040ff irq 23 at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen6.1: <0x1b21 XHCI root HUB> at usbus6
ugen7.1: <0x1b21 XHCI root HUB> at usbus7
ugen9.1: <ATI EHCI root HUB> at usbus9
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen8.1: <ATI OHCI root HUB> at usbus8
ugen2.1: <ATI EHCI root HUB> at usbus2
uhub0 on usbus6
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
uhub1 on usbus3
uhub2 on usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub3 on usbus7
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7
uhub4 on usbus9
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm6: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <ATI OHCI root HUB> at usbus5
Trying to mount root from zfs:roxiestorage0/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8 usbus9
uhub5 on usbus8
ugen4.1: <ATI EHCI root HUB> at usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
ugen1.1: <ATI OHCI root HUB> at usbus1
uhub6 on usbus4
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
uhub7 on usbus1
uhub8 on usbus5
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub9 on usbus0
uhub9: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT09B0Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich8 bus 0 scbus5 target 0 lun 0
ada1: <WDC WD10EZRX-00L4HB0 01.01A01> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
uhub8: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub7: 5 ports with 5 removable, self powered
uhub9: 4 ports with 4 removable, self powered
ugen0.2: <Google Pixel 4 XL> at usbus0
Root mount waiting for: usbus2 usbus4 usbus9
uhub4: 4 ports with 4 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus2 usbus4
ugen4.2: <Generic Mass Storage Device> at usbus4
umass0 on uhub6
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen1.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus1
ukbd0 on uhub7
ukbd0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus1
kbd2 at ukbd0
ugen1.3: <Corsair Corsair STRAFE Gaming Keyboard> at usbus1
ukbd1 on uhub7
ukbd1: <Corsair Corsair STRAFE Gaming Keyboard, class 0/0, rev 2.00/1.00, addr 3> on usbus1
kbd3 at ukbd1
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
nvidia0: <GeForce GTX 750 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.67 Thu Mar 11 00:01:57 UTC 2021
lo0: link state changed to UP
re0: link state changed to DOWN
urndis0 on uhub9
urndis0: <RNDIS Communications Control> on usbus0
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
ums0 on uhub7
ums0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus1
ums0: 5 buttons and [XYZT] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen1.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus1 (disconnected)
ums0: at uhub7, port 1, addr 2 (disconnected)
ums0: detached
ukbd0: at uhub7, port 1, addr 2 (disconnected)
ukbd0: detached
ugen1.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus1
ums0 on uhub7
ums0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus1
ums0: 5 buttons and [XYZT] coordinates ID=0
ukbd0 on uhub7
ukbd0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus1
kbd2 at ukbd0
ugen1.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus1 (disconnected)
ums0: at uhub7, port 1, addr 2 (disconnected)
ums0: detached
ukbd0: at uhub7, port 1, addr 2 (disconnected)
ukbd0: detached
ugen8.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus8
ums0 on uhub5
ums0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
ums0: 5 buttons and [XYZT] coordinates ID=0
ukbd0 on uhub5
ukbd0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
kbd2 at ukbd0
usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
ugen1.2: <Yubico YubiKey OTP+FIDO+CCID> at usbus1
ukbd2 on uhub7
ukbd2: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 2> on usbus1
kbd4 at ukbd2
uhid0 on uhub7
uhid0: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 2> on usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
ugen8.3: <Unknown > at usbus8 (disconnected)
uhub_reattach_port: could not allocate new device
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD FX(tm)-6300 Six-Core Processor (3792.84-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8160854016 (7782 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 2 4 5 3
Timecounter "TSC-low" frequency 1896419887 Hz quality 1000
KTLS: Initialized 6 threads
Cuse v0.1.36 @ /dev/cuse
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000058 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfe500000-0xfe5001ff irq 44 at device 0.0 on pci2
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe400000-0xfe4001ff irq 46 at device 0.0 on pci3
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 48 at device 0.0 on pci4
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci7
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfe080000-0xfe083fff irq 41 at device 0.1 on pci7
ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe60b000-0xfe60b3ff irq 19 at device 17.0 on pci0
ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich4: <AHCI channel> at channel 0 on ahci2
ahcich8: <AHCI channel> at channel 4 on ahci2
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe60a000-0xfe60afff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe609000-0xfe6090ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe608000-0xfe608fff irq 20 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe607000-0xfe6070ff irq 21 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfe600000-0xfe603fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib8
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe606000-0xfe606fff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci10: <ACPI PCI bus> on pcib10
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 21 at device 0.0 on pci10
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci11: <ACPI PCI bus> on pcib11
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 22 at device 0.0 on pci11
xhci1: 32 bytes context size, 64-bit DMA
usbus6 on xhci1
usbus6: 5.0Gbps Super Speed USB v3.0
pcib12: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci12: <ACPI PCI bus> on pcib12
xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe100000-0xfe107fff irq 23 at device 0.0 on pci12
xhci2: 32 bytes context size, 64-bit DMA
usbus7 on xhci2
usbus7: 5.0Gbps Super Speed USB v3.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe605000-0xfe605fff irq 22 at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe604000-0xfe6040ff irq 23 at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen8.1: <ATI OHCI root HUB> at usbus8
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen9.1: <ATI EHCI root HUB> at usbus9
ugen1.1: <ATI OHCI root HUB> at usbus1
uhub0 on usbus4
uhub1 on usbus8
uhub2 on usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3 on usbus2
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub4 on usbus0
uhub5 on usbus9
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen5.1: <ATI OHCI root HUB> at usbus5
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm6: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
Trying to mount root from zfs:roxiestorage0/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8 usbus9
uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen6.1: <0x1b21 XHCI root HUB> at usbus6
uhub6 on usbus3
ugen7.1: <0x1b21 XHCI root HUB> at usbus7
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub7 on usbus7
uhub7: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7
uhub8 on usbus5
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub9 on usbus6
uhub9: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT09B0Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich8 bus 0 scbus5 target 0 lun 0
ada1: <WDC WD10EZRX-00L4HB0 01.01A01> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub8: 2 ports with 2 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub9: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
ugen0.2: <Google Pixel 4 XL> at usbus0
Root mount waiting for: usbus2 usbus4 usbus9
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus4 usbus9
uhub3: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
ugen8.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus8
ukbd0 on uhub1
ukbd0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
kbd2 at ukbd0
ugen4.2: <Generic Mass Storage Device> at usbus4
umass0 on uhub0
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
Root mount waiting for: usbus2 CAM
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
ugen1.2: <Corsair Corsair STRAFE Gaming Keyboard> at usbus1
ukbd1 on uhub2
ukbd1: <Corsair Corsair STRAFE Gaming Keyboard, class 0/0, rev 2.00/1.00, addr 2> on usbus1
kbd3 at ukbd1
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen1.3: <Yubico YubiKey OTP+FIDO+CCID> at usbus1
ukbd2 on uhub2
ukbd2: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 3> on usbus1
kbd4 at ukbd2
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
nvidia0: <GeForce GTX 750 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.67 Thu Mar 11 00:01:57 UTC 2021
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub1
ums0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
ums0: 5 buttons and [XYZT] coordinates ID=0
uhid0 on uhub2
uhid0: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 3> on usbus1
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen0.2: <Google Pixel 4 XL> at usbus0 (disconnected)
ugen0.2: <Google Pixel 4 XL> at usbus0
urndis0 on uhub4
urndis0: <RNDIS Communications Control> on usbus0
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
All buffers synced.
Uptime: 7m48s
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p3 #0: Tue Jun 29 19:46:20 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD FX(tm)-6300 Six-Core Processor (3792.84-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8160854016 (7782 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20201113/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 5 2 3 4
Timecounter "TSC-low" frequency 1896421384 Hz quality 1000
KTLS: Initialized 6 threads
Cuse v0.1.36 @ /dev/cuse
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000058 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfe500000-0xfe5001ff irq 44 at device 0.0 on pci2
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe400000-0xfe4001ff irq 46 at device 0.0 on pci3
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 48 at device 0.0 on pci4
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 40 at device 0.0 on pci7
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbc) HDA Controller> mem 0xfe080000-0xfe083fff irq 41 at device 0.1 on pci7
ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe60b000-0xfe60b3ff irq 19 at device 17.0 on pci0
ahci2: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich4: <AHCI channel> at channel 0 on ahci2
ahcich8: <AHCI channel> at channel 4 on ahci2
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe60a000-0xfe60afff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe609000-0xfe6090ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe608000-0xfe608fff irq 20 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe607000-0xfe6070ff irq 21 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfe600000-0xfe603fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib8
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe606000-0xfe606fff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci10: <ACPI PCI bus> on pcib10
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 21 at device 0.0 on pci10
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci11: <ACPI PCI bus> on pcib11
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 22 at device 0.0 on pci11
xhci1: 32 bytes context size, 64-bit DMA
usbus6 on xhci1
usbus6: 5.0Gbps Super Speed USB v3.0
pcib12: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci12: <ACPI PCI bus> on pcib12
xhci2: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe100000-0xfe107fff irq 23 at device 0.0 on pci12
xhci2: 32 bytes context size, 64-bit DMA
usbus7 on xhci2
usbus7: 5.0Gbps Super Speed USB v3.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe605000-0xfe605fff irq 22 at device 22.0 on pci0
usbus8 on ohci3
usbus8: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe604000-0xfe6040ff irq 23 at device 22.2 on pci0
usbus9: EHCI version 1.0
usbus9 on ehci2
usbus9: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen7.1: <0x1b21 XHCI root HUB> at usbus7
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen6.1: <0x1b21 XHCI root HUB> at usbus6
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen8.1: <ATI OHCI root HUB> at usbus8
uhub0 on usbus4
uhub1 on usbus1
uhub2 on usbus2
uhub3 on usbus6
uhub4 on usbus8
uhub5 on usbus7
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
ugen5.1: <ATI OHCI root HUB> at usbus5
uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7
uhub6 on usbus5
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
hdacc0: <NVIDIA (0x0060) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0060) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0060) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm4: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm6: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
Trying to mount root from zfs:roxiestorage0/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 usbus8 usbus9
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen0.1: <0x1b21 XHCI root HUB> at usbus0
uhub7 on usbus0
uhub7: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub8 on usbus3
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen9.1: <ATI EHCI root HUB> at usbus9
uhub9 on usbus9
uhub9: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT09B0Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich8 bus 0 scbus5 target 0 lun 0
ada1: <WDC WD10EZRX-00L4HB0 01.01A01> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: quirks=0x1<4K>
uhub4: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub8: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
ugen0.2: <Google Pixel 4 XL> at usbus0
Root mount waiting for: usbus2 usbus4 usbus9
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2 usbus4 usbus9
uhub2: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
ugen4.2: <Generic Mass Storage Device> at usbus4
umass0 on uhub0
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0: Attached to scbus6
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXX]
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
ugen8.2: <EVGA EVGA TORQ X10 Gaming Mouse> at usbus8
ukbd0 on uhub4
ukbd0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
kbd2 at ukbd0
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXX]
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus6 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXX]
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen1.2: <Corsair Corsair STRAFE Gaming Keyboard> at usbus1
ukbd1 on uhub1
ukbd1: <Corsair Corsair STRAFE Gaming Keyboard, class 0/0, rev 2.00/1.00, addr 2> on usbus1
kbd3 at ukbd1
ugen1.3: <Yubico YubiKey OTP+FIDO+CCID> at usbus1
ukbd2 on uhub1
ukbd2: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 3> on usbus1
kbd4 at ukbd2
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
nvidia0: <GeForce GTX 750 Ti> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.84 Wed May 26 19:58:14 UTC 2021
lo0: link state changed to UP
re0: link state changed to DOWN
urndis0 on uhub7
urndis0: <RNDIS Communications Control> on usbus0
ue0: <USB Ethernet> on urndis0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
ums0 on uhub4
ums0: <EVGA EVGA TORQ X10 Gaming Mouse, class 0/0, rev 2.00/28.01, addr 2> on usbus8
ums0: 5 buttons and [XYZT] coordinates ID=0
uhid0 on uhub1
uhid0: <Yubico YubiKey OTP+FIDO+CCID, class 0/0, rev 2.00/5.12, addr 3> on usbus1