Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-08-13 11:52:22
From: rin
Description: NetBSD/landisk 9.99.87 on I-O DATA USL-5P
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.87 (USL-5P) #2: Fri Aug 13 20:11:30 JST 2021
rin@latipes:/sys/arch/landisk/compile/USL-5P
Model: I-O DATA LANDISK
total memory = 65536 KB
avail memory = 58548 KB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: SH4 266.666 MHz PCLOCK 33.333 MHz
cpu0: 8KB/32B direct-mapped Instruction cache.
cpu0: 16KB/32B direct-mapped Data cache.
cpu0: U0, P0, P3 write-through; P1 write-through
cpu0: full-associative 4 ITLB, 64 UTLB entries
cpu0: multiple virtual storage mode, SQ access: kernel, wired 3
shpcic0 at mainbus0: Hitachi SH7751R PCI Controller (host bridge, revision 0x01)
pci0 at shpcic0
pci0: i/o space, memory space enabled
re0 at pci0 dev 0 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20)
re0: interrupting at irq 5
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 64 tx descriptors
rlphy0 at re0 phy 0: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 2 function 0: NEC USB Host Controller (rev. 0x43)
ohci0: interrupting at irq 7
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: NEC USB Host Controller (rev. 0x43)
ohci1: interrupting at irq 8
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
shb0 at mainbus0
scif0 at shb0
scif0: console
rs5c313rtc0 at shb0: RICOH 5C313 real time clock
obio0 at mainbus0
wdc0 at obio0 port 0x14000000-0x1400000f irq 10
atabus0 at wdc0 channel 0
btn0 at obio0 irq 12: USL-5P buttons
pwrsw0 at obio0 irq 11: Power Switch
entropy: WARNING: extracting entropy too early
timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
aes: BearSSL aes_ct
aes_ccm: self-test passed
chacha: Portable C ChaCha
blake2s: self-test passed
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: SanDisk (0x0781) Ultra (0x5581), rev 2.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable
sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors
wd0 at atabus0 drive 0
wd0: <TS16GCF170>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 15280 MB, 33114 cyl, 15 head, 63 sec, 512 bytes/sect x 31293440 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)boot device: wd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/landisk/9.99.87/modules