Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-08-24 15:47:44
From: root
Description: FreeBSD/amd64 on HPE ProLiant DL20 Gen10
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p7 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1024x768 CPU: Intel(R) Xeon(R) E-2136 CPU @ 3.30GHz (3312.15-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33183105024 (31645 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPE Server > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 6 4 8 7 5 9 10 3 2 11 Timecounter "TSC-low" frequency 1656075127 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81115e70, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <HPE Server> on motherboard acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 acpi_syscontainer0: <System Container> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x80100000-0x8010ffff at device 20.0 numa-domain 0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 numa-domain 0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.4 (no driver attached) ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x80110000-0x80111fff,0x80114000-0x801140ff,0x80113000-0x801137ff at device 23.0 numa-domain 0 on pci0 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib3: <ACPI PCI-PCI bridge> at device 27.0 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 vgapci0: <VGA-compatible display> mem 0x84000000-0x84ffffff,0x85b98000-0x85b9bfff,0x85000000-0x857fffff at device 0.1 numa-domain 0 on pci4 vgapci0: Boot video device ehci0: <EHCI (generic) USB 2.0 controller> mem 0x85b9c000-0x85b9c0ff at device 0.4 numa-domain 0 on pci4 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 28.1 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 bge0: <HPE Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0x80030000-0x8003ffff,0x80040000-0x8004ffff,0x80050000-0x8005ffff at device 0.0 numa-domain 0 on pci5 bge0: APE FW version: NCSI v1.5.18.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] bge1: <HPE Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0x80000000-0x8000ffff,0x80010000-0x8001ffff,0x80020000-0x8002ffff at device 0.1 numa-domain 0 on pci5 bge1: APE FW version: NCSI v1.5.18.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] pcib6: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 pci0: <serial bus> at device 31.5 (no driver attached) cpu0: <ACPI CPU> numa-domain 0 on acpi0 uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <(0x103c) EHCI root HUB> at usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <(0x103c) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <MM2000GEFRA HPG8> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <MM2000GEFRA HPG8> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 GEOM_ELI: Device ada0p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada1p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware uhub0: 22 ports with 22 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.2: <vendor 0x0424 product 0x2660> at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0 uhub2: 2 ports with 1 removable, self powered Root mount waiting for: usbus1 uhub1: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen1.2: <iLO product 0x7029> at usbus1 ukbd0 numa-domain 0 on uhub1 ukbd0: <Virtual Keyboard> on usbus1 kbd2 at ukbd0 uhub_explore: illegal enable change, port 1 lo0: link state changed to UP bge0: link state changed to DOWN ums0 numa-domain 0 on uhub1 ums0: <Virtual Mouse> on usbus1 ums0: 3 buttons and [Z] coordinates ID=0 pflog0: promiscuous mode enabled bge0: link state changed to UP