Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-09-05 23:45:00
From: Robert Menes
Description: Dell PowerEdge R310 (FreeBSD 12.2-amd64)
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz (2527.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106e5  Family=0x6  Model=0x1e  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16605773824 (15836 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 7 3 5 4 6 2
Timecounter "TSC-low" frequency 1263517956 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2008> port 0xfc00-0xfcff mem 0xdf2b0000-0xdf2bffff,0xdf2c0000-0xdf2fffff irq 16 at device 0.0 on pci2
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdf0fa000-0xdf0fa3ff irq 22 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: [_MAC_XXXXXXXXXX]
bce0: 
bce0: link state changed to DOWN
ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.10)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 17 at device 0.1 on pci4
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: [_MAC_XXXXXXXXXX]
bce1: 
bce1: link state changed to DOWN
ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.10)
Coal (RX:6,6,18,18; TX:20,20,80,80)
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdf0fc000-0xdf0fc3ff irq 22 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci5
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Ibex Peak (RAID) AHCI SATA controller> port 0xecd0-0xecd7,0xecc8-0xeccb,0xecd8-0xecdf,0xeccc-0xeccf,0xece0-0xecff mem 0xdf0fe000-0xdf0fe7ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xd0000-0xd57ff,0xec000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est7 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1
ugen0.2: <vendor 0x8087 product 0x0020> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0020> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: CAM usbus0 usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: CAM usbus0
ugen0.3: <vendor 0x0424 product 0x2514> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus0
uhub4: MTT enabled
Root mount waiting for: CAM usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.4: <SIGMACHIP USB Keyboard> at usbus0
ukbd0 on uhub4
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 4> on usbus0
kbd2 at ukbd0
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe4:mps0:0:1:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe4:mps0:0:1:0): CAM status: SCSI Status Error
(probe4:mps0:0:1:0): SCSI status: Check Condition
(probe4:mps0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe4:mps0:0:1:0): Command Specific Info: 0x18d608c0
(probe4:mps0:0:1:0): Error 22, Unretryable error
da0 at mps0 bus 0 scbus0 target 1 lun 0
da0: <Dell Virtual Disk 1028> Fixed Direct Access SPC-4 SCSI device
da0: 150.000MB/s transfers
da0: Command Queueing enabled
da0: 1905664MB (3902799872 512 byte sectors)
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: pass1,cd0 in 'Slot 04', SATA Slot: scbus5 target 0
cd0 at ahcich4 bus 0 scbus5 target 0 lun 0
cd0: <TEAC DVD-ROM DV-28SW R.2A> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
lo0: link state changed to UP
bce0: link state changed to UP
uhid0 on uhub4
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 4> on usbus0