Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-09-14 15:21:15
From: root
Description: FreeBSD/amd64 on To be filled by O.E.M. To be filled by O.E.M.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:24:09 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (2394.51-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
Structured Extended Features3=0xc000000<IBPB,STIBP>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8186523648 (7807 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
WARNING: Bogus Interrupt Polarity. Assume CONFORMS
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 3 2
Timecounter "TSC-low" frequency 1197253026 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
000.000055 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xa7c00000-0xa7ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xa831c000-0xa831ffff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa8300000-0xa830ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xa8318000-0xa831bfff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
iwn0: <Intel Centrino Advanced 6235> mem 0xa8200000-0xa8201fff irq 18 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xa8100000-0xa8100fff,0xc0100000-0xc0103fff irq 19 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa8000000-0xa8000fff,0xc0000000-0xc0003fff irq 16 at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: turning off MSI enable bit.
re1: ASPM disabled
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xa8323000-0xa83233ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0xa8322000-0xa83227ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Rear Analog)> at nid 21 and 24 on hdaa1
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <Kingchuxing 128GB U0330A0> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
GEOM_MIRROR: Device mirror/swap launched (1/1).
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0 usbus1
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x07da> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
ichsmb0: <Intel Lynx Point-LP SMBus controller> port 0x5040-0x505f mem 0xa8321000-0xa83210ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
pchtherm0: <Haswell Thermal Subsystem> mem 0xa8320000-0xa8320fff irq 18 at device 31.6 on pci0
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
re0: link state changed to DOWN
iwn0: iwn_read_firmware: ucode rev=0x12a80601
re1: link state changed to DOWN
ubt0 on uhub1
ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 1> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
wlan0: link state changed to UP