Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-09-23 08:52:12
From: Andrew
Description: FreeBSD/arm64 under VMWare Fusion
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n249422-e51aabf8cbb: Thu Sep 16 07:03:13 UTC 2021
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 12.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
module firmware already present!
real memory  = 2143993856 (2044 MB)
avail memory = 2057637888 (1962 MB)
Starting CPU 1 (1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: unblocking device.
random: entropy device external interface
MAP f8700000 mode 2 pages 80
MAP f8750000 mode 2 pages 80
MAP f8850000 mode 2 pages 80
MAP f88a0000 mode 2 pages 80
MAP f88f0000 mode 2 pages 80
MAP f8940000 mode 2 pages 80
MAP f89b0000 mode 2 pages 80
MAP f8a00000 mode 2 pages 80
MAP f8a50000 mode 2 pages 80
MAP f8aa0000 mode 2 pages 160
MAP fbe20000 mode 2 pages 144
MAP fbed0000 mode 2 pages 272
MAP 1000000 mode 0 pages 24
MAP 20000000 mode 0 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x2c010000-0x2c01ffff,0x2c100000-0x2c13ffff irq 0 on ofwbus0
generic_timer0: <ARMv8 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
pcib0: <Generic PCI host controller> mem 0x40000000-0x4fffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x3f400000-0x3f7fffff,0x78000000-0x7fffffff at device 15.0 on pci0
vgapci0: Boot video device
pcib1: <PCI-PCI bridge> at device 17.0 on pci0
pci1: <PCI bus> on pcib1
uhci0: <UHCI (generic) USB controller> port 0xf000-0xf01f at device 0.0 on pci1
uhci0: LegSup = 0x0000
usbus0 on uhci0
pci1: <multimedia, HDA> at device 1.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x3fb08000-0x3fb0bfff at device 2.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
ahci0: <AHCI SATA controller> mem 0x3fb04000-0x3fb07fff at device 3.0 on pci1
ahci0: AHCI v1.30 with 30 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahcich8: <AHCI channel> at channel 8 on ahci0
ahcich9: <AHCI channel> at channel 9 on ahci0
ahcich10: <AHCI channel> at channel 10 on ahci0
ahcich11: <AHCI channel> at channel 11 on ahci0
ahcich12: <AHCI channel> at channel 12 on ahci0
ahcich13: <AHCI channel> at channel 13 on ahci0
ahcich14: <AHCI channel> at channel 14 on ahci0
ahcich15: <AHCI channel> at channel 15 on ahci0
ahcich16: <AHCI channel> at channel 16 on ahci0
ahcich17: <AHCI channel> at channel 17 on ahci0
ahcich18: <AHCI channel> at channel 18 on ahci0
ahcich19: <AHCI channel> at channel 19 on ahci0
ahcich20: <AHCI channel> at channel 20 on ahci0
ahcich21: <AHCI channel> at channel 21 on ahci0
ahcich22: <AHCI channel> at channel 22 on ahci0
ahcich23: <AHCI channel> at channel 23 on ahci0
ahcich24: <AHCI channel> at channel 24 on ahci0
ahcich25: <AHCI channel> at channel 25 on ahci0
ahcich26: <AHCI channel> at channel 26 on ahci0
ahcich27: <AHCI channel> at channel 27 on ahci0
ahcich28: <AHCI channel> at channel 28 on ahci0
ahcich29: <AHCI channel> at channel 29 on ahci0
pcib2: <PCI-PCI bridge> at device 21.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0x3fa00000-0x3fa1ffff,0x3fa20000-0x3fa23fff at device 0.0 on pci2
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 2 RX queues 2 TX queues
em0: Using MSI-X interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <PCI-PCI bridge> at device 21.1 on pci0
pcib4: <PCI-PCI bridge> at device 21.2 on pci0
pcib5: <PCI-PCI bridge> at device 21.3 on pci0
pcib6: <PCI-PCI bridge> at device 21.4 on pci0
pcib7: <PCI-PCI bridge> at device 21.5 on pci0
pcib8: <PCI-PCI bridge> at device 21.6 on pci0
pcib9: <PCI-PCI bridge> at device 21.7 on pci0
pcib10: <PCI-PCI bridge> at device 22.0 on pci0
pci3: <PCI bus> on pcib10
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x3f900000-0x3f97ffff at device 0.0 on pci3
xhci0: 32 bytes context size, 64-bit DMA
usbus2 on xhci0
pcib11: <PCI-PCI bridge> at device 22.1 on pci0
pcib12: <PCI-PCI bridge> at device 22.2 on pci0
pcib13: <PCI-PCI bridge> at device 22.3 on pci0
pcib14: <PCI-PCI bridge> at device 22.4 on pci0
pcib15: <PCI-PCI bridge> at device 22.5 on pci0
pcib16: <PCI-PCI bridge> at device 22.6 on pci0
pcib17: <PCI-PCI bridge> at device 22.7 on pci0
pcib18: <PCI-PCI bridge> at device 23.0 on pci0
pci4: <PCI bus> on pcib18
nvme0: <Generic NVMe Device> port 0xd000-0xd007 mem 0x3f800000-0x3f803fff at device 0.0 on pci4
pcib19: <PCI-PCI bridge> at device 23.1 on pci0
pcib20: <PCI-PCI bridge> at device 23.2 on pci0
pcib21: <PCI-PCI bridge> at device 23.3 on pci0
pcib22: <PCI-PCI bridge> at device 23.4 on pci0
pcib23: <PCI-PCI bridge> at device 23.5 on pci0
pcib24: <PCI-PCI bridge> at device 23.6 on pci0
pcib25: <PCI-PCI bridge> at device 23.7 on pci0
pcib26: <PCI-PCI bridge> at device 24.0 on pci0
pcib27: <PCI-PCI bridge> at device 24.1 on pci0
pcib28: <PCI-PCI bridge> at device 24.2 on pci0
pcib29: <PCI-PCI bridge> at device 24.3 on pci0
pcib30: <PCI-PCI bridge> at device 24.4 on pci0
pcib31: <PCI-PCI bridge> at device 24.5 on pci0
pcib32: <PCI-PCI bridge> at device 24.6 on pci0
pcib33: <PCI-PCI bridge> at device 24.7 on pci0
uart0: <16550 or compatible> mem 0x3fff03f8-0x3fff03ff irq 5 on ofwbus0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> mem 0x3fff02f8-0x3fff02ff irq 6 on ofwbus0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
em0: link state changed to UP
debugnet_any_ifnet_update: Bad dn_init result from em0 (ifp 0xffffa00002022800), ignoring.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
ugen1.1: <(0x15ad) EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <(0x15ad) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <(0x15ad) UHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <(0x15ad) UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <0x15ad XHCI root HUB> at usbus2
uhub2 on usbus2
uhub2: <0x15ad XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
nvme0: temperature threshold not supported
CPU  0: Unknown Implementer (midr: 00000000) affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <TLBI-OSR,CondM-8.5,FHM,DP,SHA3,RDM,Atomic,CRC32,SHA2+SHA512,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <PredInv,SB,FRINTTS,GPI,RCPC-8.4,FCMA,JSCVT,API EPAC,DCCVADP>
         Processor Features 0 = <CSV3,CSV2,PSTATE.DIT,RAS,GIC,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0>
         Processor Features 1 = <PSTATE.SSBS MSR>
      Memory Model Features 0 = <ExS,TGran4,8bit ASID,64GB PA>
      Memory Model Features 1 = <XNX,SpecSEI,PAN+ATS1E1,LO,HPD+TTPBHA,8bit VMID>
      Memory Model Features 2 = <E0PD,TTL,IDS,AT,32bit CCIDX,48bit VA,IESB,UAO,CnP>
             Debug Features 0 = <2 CTX BKPTs,2 Watchpoints,2 Breakpoints,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <>
AArch32 Media and VFP Features 0 = <>
AArch32 Media and VFP Features 1 = <>
CPU  1: Unknown Implementer (midr: 00000000) affinity:  1
Release APs...Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 CAM usbus2
done
WARNING: WITNESS option enabled, expect reduced performance.
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware SATA CD01 1.00> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 600.000MB/s transfers (SATA 3.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
nda0 at nvme0 bus 0 scbus30 target 0 lun 1
nda0: <VMware Virtual NVMe Disk 1.3 VMware NVME_0000>
nda0: [_SERIAL_NUMBER_XXX] NVME_0000
nda0: nvme version 1.3 x32 (max x32) lanes PCIe Gen2 (max Gen2) link
nda0: 20480MB (41943040 512 byte sectors)
uhub1: 2 ports with 2 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen2.2: <VMware VMware Virtual USB Mouse> at usbus2
ugen0.2: <VMware Virtual Bluetooth Adapter> at usbus0
ugen2.3: <VMware VMware Virtual USB Keyboard> at usbus2
ukbd0 on uhub2
ukbd0: <VMware> on usbus2
kbd1 at ukbd0
Root mount waiting for: usbus0 usbus1 usbus2
ugen2.4: <VMware, Inc. VMware Virtual USB Hub> at usbus2
uhub3 on uhub2
uhub3: <VMware, Inc.> on usbus2
ugen0.3: <VMware, Inc. VMware Virtual USB Hub> at usbus0
uhub4 on uhub1
uhub4: <VMware, Inc.> on usbus0
Root mount waiting for: usbus0 usbus1 usbus2
uhub0: 6 ports with 6 removable, self powered
uhub3: 7 ports with 7 removable, self powered
uhub4: 7 ports with 7 removable, self powered
ugen2.5: <VMware, Inc. VMware Virtual USB Hub> at usbus2
uhub5 on uhub2
uhub5: <VMware, Inc.> on usbus2
Root mount waiting for: usbus2
uhub5: 7 ports with 7 removable, self powered
Dual Console: Video Primary, Serial Secondary
lo0: link state changed to UP
uhid0 on uhub2
uhid0: <VMware> on usbus2
uhid1 on uhub2
uhid1: <VMware> on usbus2
ubt0 on uhub1
ubt0: <VMware Virtual Bluetooth Adapter, class 224/1, rev 2.00/1.00, addr 2> on usbus0