Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-10-14 21:21:26
From: DarkainMX
Description: Framework Laptop
---<<BOOT>>---
Copyright (c) 668B-5668 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n249761-9aa29457d55: Thu Sep 30 07:55:37 UTC 2021
    XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64
FreeBSD clang version 12.0.1 (XXX@XXX)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 2256x1504
CPU: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (2803.20-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806c1  Family=0x6  Model=0x8c  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
  Structured Extended Features2=0x18c05fce<AVX512VBMI,UMIP,PKU,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc100510<FSRM,AVX512VP2INTERSECT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 68717379584 (65534 MB)
avail memory = 66513698816 (63432 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INSYDE TGL-ULT>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 5 4 7 6 3 2
Timecounter "TSC-low" frequency 1401600000 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x439e3000-0x439e301e
smbios0: Version: 3.3, BCD Revision: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <INSYDE TGL-ULT>
acpi_ec_ecdt_probe: can't get handle
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66,0x200-0x207,0x800-0x807 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x605c000000-0x605cffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0x7a200000-0x7a203fff,0x7a204000-0x7a2040ff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 7.2 on pci0
pcib5: <ACPI PCI-PCI bridge> at device 7.3 on pci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x605d1b0000-0x605d1bffff at device 13.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <serial bus, USB> at device 13.2 (no driver attached)
pci0: <serial bus, USB> at device 13.3 (no driver attached)
pci0: <simple comms, UART> at device 18.0 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0x7a300000-0x7a30ffff at device 20.0 on pci0
xhci1: 32 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <serial bus> at device 21.3 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Tiger Lake HDA Controller> mem 0x605d1c8000-0x605d1cbfff,0x605d000000-0x605d0fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (210.1C)
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
battery0: <ACPI Control Method Battery> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <0x8086 XHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <PC SN730 NVMe WDC 1024GB> NVMe namespace
nvd0: 976762MB (2000409264 512 byte sectors)
hdacc0: <Realtek ALC295 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC295 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC295 (Internal Analog)> at nid 20 and 18 on hdaa0
pcm1: <Realtek ALC295 (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel Tiger Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Tiger Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Tiger Lake (HDMI/DP 8ch)> at nid 4 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 CAM
WARNING: WITNESS option enabled, expect reduced performance.
uhub1: 5 ports with 5 removable, self powered
uhub0: 16 ports with 16 removable, self powered
uhub_reattach_port: port 2 U1 timeout failed, error=USB_ERR_IOERROR
uhub_reattach_port: port 2 U2 timeout failed, error=USB_ERR_IOERROR
Root mount waiting for: usbus0 usbus1
ugen1.2: <Framework HDMI Expansion Card> at usbus1
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub2 on uhub0
uhub2: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 2> on usbus1
uhub2: MTT enabled
ugen0.2: <vendor 0x13fe USB DISK 3.2> at usbus0
umass0 on uhub1
umass0: <vendor 0x13fe USB DISK 3.2, class 0/0, rev 3.20/1.10, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:0:0: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: < USB DISK 3.2 PMAP> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number...
da0: 400.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <Interrupt In Interface> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 3> on usbus1
kbd2 at ukbd0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.5: <Generic Laptop Camera> at usbus1
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ugen1.6: <Goodix Technology Co., Ltd. Goodix USB2.0 MISC> at usbus1
ugen1.7: <vendor 0x8087 product 0x0aaa> at usbus1
drmn0: <drmn> on vgapci0
[drm] i915.alpha_support is deprecated, use i915.force_probe=9a49 instead
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
VT: Replacing driver "efifb" with new "dummy".
Failed to add WC MTRR for [0x4000000000-0x400fffffff]: -22; performance may suffer
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
[drm] Got stolen memory base 0x0, size 0x0
WARN_ON(qi->num_points > (sizeof(qi->points) / sizeof((qi->points)[0])))
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: could not load firmware image 'i915/tgl_dmc_ver2_04.bin'
drmn0: Failed to load DMC firmware i915/tgl_dmc_ver2_04.bin. Disabling runtime power management.
drmn0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915<6>[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-3
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-4: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-4
[drm]   - kern.vt.fb.default_mode
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized i915 1.6.0 20191101 for drmn0 on minor 0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
taskqueue_drain with the following non-sleepable locks held:
exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff81aea2e8) locked @ /usr/src/sys/dev/vt/vt_core.c:3017
stack backtrace:
#0 0xffffffff80c984c1 at witness_debugger+0x71
#1 0xffffffff80c995da at witness_warn+0x3fa
#2 0xffffffff80c8af33 at taskqueue_drain+0x33
#3 0xffffffff84bb12a3 at vt_kms_postswitch+0x73
#4 0xffffffff80a72d0d at vt_fb_init+0xfd
#5 0xffffffff80a7a398 at vt_replace_backend+0x118
#6 0xffffffff80a72e13 at vt_fb_attach+0x13
#7 0xffffffff84bb1eb5 at linux_register_framebuffer+0x535
#8 0xffffffff84bb9749 at __drm_fb_helper_initial_config_and_unlock+0x419
#9 0xffffffff84b1b1e0 at intel_fbdev_initial_config_async+0x20
#10 0xffffffff84a061f1 at i915_driver_probe+0x10a1
#11 0xffffffff84a20c3d at i915_pci_probe+0x5d
#12 0xffffffff80e94ffe at linux_pci_attach_device+0x42e
#13 0xffffffff80c63601 at device_attach+0x3c1
#14 0xffffffff80c631b0 at device_probe_and_attach+0x70
#15 0xffffffff80c65097 at bus_generic_driver_added+0x67
#16 0xffffffff80c60cb9 at devclass_driver_added+0x39
#17 0xffffffff80c60bf7 at devclass_add_driver+0x147
Sleeping on "tq_drain" with the following non-sleepable locks held:
exclusive sleep mutex vtdev (vtdev) r = 0 (0xffffffff81aea2e8) locked @ /usr/src/sys/dev/vt/vt_core.c:3017
stack backtrace:
#0 0xffffffff80c984c1 at witness_debugger+0x71
#1 0xffffffff80c995da at witness_warn+0x3fa
#2 0xffffffff80c33815 at _sleep+0x55
#3 0xffffffff80c8affb at taskqueue_drain+0xfb
#4 0xffffffff84bb12a3 at vt_kms_postswitch+0x73
#5 0xffffffff80a72d0d at vt_fb_init+0xfd
#6 0xffffffff80a7a398 at vt_replace_backend+0x118
#7 0xffffffff80a72e13 at vt_fb_attach+0x13
#8 0xffffffff84bb1eb5 at linux_register_framebuffer+0x535
#9 0xffffffff84bb9749 at __drm_fb_helper_initial_config_and_unlock+0x419
#10 0xffffffff84b1b1e0 at intel_fbdev_initial_config_async+0x20
#11 0xffffffff84a061f1 at i915_driver_probe+0x10a1
#12 0xffffffff84a20c3d at i915_pci_probe+0x5d
#13 0xffffffff80e94ffe at linux_pci_attach_device+0x42e
#14 0xffffffff80c63601 at device_attach+0x3c1
#15 0xffffffff80c631b0 at device_probe_and_attach+0x70
#16 0xffffffff80c65097 at bus_generic_driver_added+0x67
#17 0xffffffff80c60cb9 at devclass_driver_added+0x39
lock order reversal: (Giant after non-sleepable)
 1st 0xffffffff81aea2e8 vtdev (vtdev, sleep mutex) @ /usr/src/sys/dev/vt/vt_core.c:3017
 2nd 0xffffffff81a029c0 Giant (Giant, sleep mutex) @ /usr/src/sys/kern/kern_synch.c:232
lock order Giant -> vtdev established at:
#0 0xffffffff80c978d9 at witness_checkorder+0x459
#1 0xffffffff80c03794 at __mtx_lock_flags+0x94
#2 0xffffffff80a79969 at vt_upgrade+0x369
#3 0xffffffff80bb15d0 at mi_startup+0x1f0
#4 0xffffffff80385022 at btext+0x22
lock order vtdev -> Giant attempted at:
#0 0xffffffff80c9820f at witness_checkorder+0xd8f
#1 0xffffffff80c03794 at __mtx_lock_flags+0x94
#2 0xffffffff80c33af4 at _sleep+0x334
#3 0xffffffff80c8affb at taskqueue_drain+0xfb
#4 0xffffffff84bb12a3 at vt_kms_postswitch+0x73
#5 0xffffffff80a72d0d at vt_fb_init+0xfd
#6 0xffffffff80a7a398 at vt_replace_backend+0x118
#7 0xffffffff80a72e13 at vt_fb_attach+0x13
#8 0xffffffff84bb1eb5 at linux_register_framebuffer+0x535
#9 0xffffffff84bb9749 at __drm_fb_helper_initial_config_and_unlock+0x419
#10 0xffffffff84b1b1e0 at intel_fbdev_initial_config_async+0x20
#11 0xffffffff84a061f1 at i915_driver_probe+0x10a1
#12 0xffffffff84a20c3d at i915_pci_probe+0x5d
#13 0xffffffff80e94ffe at linux_pci_attach_device+0x42e
#14 0xffffffff80c63601 at device_attach+0x3c1
#15 0xffffffff80c631b0 at device_probe_and_attach+0x70
#16 0xffffffff80c65097 at bus_generic_driver_added+0x67
#17 0xffffffff80c60cb9 at devclass_driver_added+0x39
start FB_INFO:
type=11 height=1504 width=2256 depth=32
cmsize=16 size=13574144
pbase=0x4000040000 vbase=0xfffffe01aa640000
name=drmn0 flags=0x0 stride=9024 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: i915drmfb frame buffer device
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20210730/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20210730/nsarguments-361)
ig4iic0: <Intel Tiger Lake-LP I2C Controller-4> at device 21.0 on pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Intel Tiger Lake-LP I2C Controller-5> at device 21.1 on pci0
ig4iic1: Using MSI
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
iicbus1: <unknown card> at addr 0x50
ig4iic2: <Intel Tiger Lake-LP I2C Controller-7> at device 21.3 on pci0
ig4iic2: Using MSI
iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2
iicbus2: <unknown card> at addr 0x2c
iicbus2: <unknown card> at addr 0x37
ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x605d1d4000-0x605d1d40ff at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
uhid0 on uhub0
uhid0: <Control Interface> on usbus1
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 3> on usbus1
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
ure0 on uhub3
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 3> on usbus0
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
iichid0: <FRMW0001:01 32AC:0006 I2C HID device> at addr 0x50 on iicbus1
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
iichid1: <PIXA3854:01 093A:0274 I2C HID device> at addr 0x2c on iicbus2
iichid1: Interrupt setup failed. Fallback to sampling
hidbus1: <HID bus> on iichid1
ue0: link state changed to DOWN
hcons0: <FRMW0001:01 32AC:0006 Consumer Control> on hidbus0
hms0: <PIXA3854:01 093A:0274 Mouse> on hidbus1
hms0: 2 buttons and [XY] coordinates ID=2
hmt0: <PIXA3854:01 093A:0274 TouchPad> on hidbus1
hconf0: <PIXA3854:01 093A:0274 Configuration> on hidbus1
hmt0: Multitouch touchpad with 2 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [1337:876]
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub2: at uhub0, port 6, addr 2 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub2, port 4, addr 3 (disconnected)
ukbd0: detached
ums0: at uhub2, port 4, addr 3 (disconnected)
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub3: at uhub1, port 5, addr 2 (disconnected)
ums0: detached
uhid1: at uhub2, port 4, addr 3 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub3, port 3, addr 3 (disconnected)
uhid1: detached
uhub2: detached
rgephy0: detached
miibus0: detached
ure0: detached
uhub3: detached
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 7> on usbus1
kbd2 at ukbd0
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 7> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub0
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 7> on usbus1
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 8> on usbus1
uhub3: MTT enabled
uhub3: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 5> on usbus0
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 8 (disconnected)
uhub3: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 4 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 5 (disconnected)
rgephy0: detached
miibus0: detached
ure0: detached
uhub2: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 9> on usbus1
uhub3: MTT enabled
uhub3: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 7> on usbus0
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 9 (disconnected)
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 6 (disconnected)
uhub3: detached
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 7 (disconnected)
ue0: link state changed to DOWN
rgephy0: detached
miibus0: detached
ure0: detached
uhub2: detached
usb_alloc_device: set address 4 failed (USB_ERR_IOERROR, ignored)
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 9> on usbus0
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 4> on usbus1
uhub3: 4 ports with 4 removable, self powered
ue0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.3: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub0, port 6, addr 7 (disconnected)
ukbd0: detached
ums0: at uhub0, port 6, addr 7 (disconnected)
ums0: detached
uhid1: at uhub0, port 6, addr 7 (disconnected)
uhid1: detached
usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, port reset failed, USB_ERR_IOERROR
ugen1.3: <Unknown > at usbus1 (disconnected)
uhub_reattach_port: could not allocate new device
uhub_reattach_port: device problem (USB_ERR_IOERROR), disabling port 2
ugen1.4: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 4 (disconnected)
uhub3: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 8 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 9 (disconnected)
rgephy0: detached
miibus0: detached
ure0: detached
uhub2: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 12> on usbus1
uhub3: MTT enabled
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 11> on usbus0
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 13> on usbus1
kbd2 at ukbd0
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 13> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub3
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 13> on usbus1
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 12 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub3, port 2, addr 13 (disconnected)
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 10 (disconnected)
ukbd0: detached
ums0: at uhub3, port 2, addr 13 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 11 (disconnected)
ums0: detached
uhid1: at uhub3, port 2, addr 13 (disconnected)
uhid1: detached
rgephy0: detached
miibus0: detached
ure0: detached
uhub3: detached
uhub2: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 14> on usbus1
uhub3: MTT enabled
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 13> on usbus0
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 15> on usbus1
kbd2 at ukbd0
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 15> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub3
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 15> on usbus1
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 14 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub3, port 2, addr 15 (disconnected)
ukbd0: detached
ums0: at uhub3, port 2, addr 15 (disconnected)
ums0: detached
uhid1: at uhub3, port 2, addr 15 (disconnected)
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 12 (disconnected)
uhid1: detached
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 13 (disconnected)
uhub3: detached
rgephy0: detached
miibus0: detached
ure0: detached
uhub2: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <Interrupt In Interface> on usbus0
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 16> on usbus1
uhub3: MTT enabled
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 15> on usbus0
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 17> on usbus1
kbd2 at ukbd0
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 17> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub3
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 17> on usbus1
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub3: at uhub0, port 3, addr 16 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub3, port 2, addr 17 (disconnected)
ukbd0: detached
ums0: at uhub3, port 2, addr 17 (disconnected)
ums0: detached
uhid1: at uhub3, port 2, addr 17 (disconnected)
uhid1: detached
uhub3: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 3, addr 14 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub2, port 3, addr 15 (disconnected)
rgephy0: detached
miibus0: detached
ure0: detached
uhub2: detached
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub2 on uhub0
uhub2: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 18> on usbus1
uhub2: MTT enabled
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <Interrupt In Interface> on usbus0
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen1.4: <Logitech USB Receiver> at usbus1
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub3
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 17> on usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 19> on usbus1
kbd2 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 19> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 19> on usbus1
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1 (disconnected)
uhub2: at uhub0, port 3, addr 18 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub2, port 2, addr 19 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 19 (disconnected)
ums0: detached
uhid1: at uhub2, port 2, addr 19 (disconnected)
uhid1: detached
uhub2: detached
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0 (disconnected)
uhub3: at uhub1, port 3, addr 16 (disconnected)
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0 (disconnected)
ure0: at uhub3, port 3, addr 17 (disconnected)
rgephy0: detached
miibus0: detached
ure0: detached
uhub3: detached
ugen1.3: <Generic 4-Port USB 2.0 Hub> at usbus1
uhub2 on uhub0
uhub2: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.04, addr 20> on usbus1
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub3 on uhub1
uhub2: MTT enabled
uhub3: <Interrupt In Interface> on usbus0
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen1.4: <Logitech USB Receiver> at usbus1
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub3
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 19> on usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 21> on usbus1
kbd2 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 21> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/39.04, addr 21> on usbus1
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: ...
ue0: link state changed to DOWN
ue0: link state changed to UP