Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-10-16 18:44:10
From: yeti
Description: Raspberry Pi 3 B plus / NetBSD9
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.0_STABLE (GENERIC64) #0: Mon Jul 20 18:35:18 UTC 2020
	xxx@xxx.xxx:/usr/src/sys/arch/evbarm/compile/GENERIC64
total memory = 933 MB
avail memory = 900 MB
timecounter: Timecounters tick every 10.000 msec
armfdt0 (root)
simplebus0 at armfdt0: Raspberry Pi 3 Model B Plus Rev 1.3
simplebus1 at simplebus0
simplebus2 at simplebus0
cpus0 at simplebus0
simplebus3 at simplebus0
cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu0: package 0, core 0, smt 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64
cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu1: package 0, core 1, smt 0
cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu2: package 0, core 2, smt 0
cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
cpu3: package 0, core 3, smt 0
simplebus4 at simplebus1
bcmicu0 at simplebus1
bcmicu1 at simplebus1: Multiprocessor
bcmcprman0 at simplebus1: BCM283x Clock Controller
fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
bcmaux0 at simplebus1
fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on local_intc irq 3
armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual)
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
plcom0 at simplebus1: ARM PL011 UART
plcom0: txfifo disabled
plcom0: interrupting on icu irq 185
com0 at simplebus1: BCM AUX UART, working fifo
com0: console
com0: interrupting on icu irq 157
mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs
/soc/thermal@7e212000 at simplebus1 not configured
/soc/dsi@7e209000 at simplebus1 not configured
bcmgpio0 at simplebus1: GPIO controller
bcmgpio0: pins 0..31 interrupting on icu irq 177
bcmgpio0: pins 32..54 interrupting on icu irq 178
gpio0 at bcmgpio0: 54 pins
/soc/firmware/gpio at simplebus4 not configured
bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
/soc/power at simplebus1 not configured
bsciic0 at simplebus1: Broadcom Serial Controller
iic0 at bsciic0: I2C bus
/phy at simplebus0 not configured
bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
bcmmbox0 at simplebus1: VC mailbox
bcmmbox0: interrupting on icu irq 193
vcmbox0 at bcmmbox0
bcmsdhost0 at simplebus1: SD HOST controller
bcmsdhost0: interrupting on icu irq 184
bsciic1 at simplebus1: Broadcom Serial Controller
iic1 at bsciic1: I2C bus
/soc/pwm@7e20c000 at simplebus1 not configured
sdhc0 at simplebus1: SDHC controller
sdhc0: interrupting on icu irq 190
bsciic2 at simplebus1: Broadcom Serial Controller
iic2 at bsciic2: I2C bus
/soc/vec@7e806000 at simplebus1 not configured
/soc/hdmi@7e902000 at simplebus1 not configured
dwctwo0 at simplebus1: USB controller
dwctwo0: interrupting on icu irq 137
/soc/gpu at simplebus1 not configured
genfb0 at simplebus1: switching to framebuffer console
genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
/soc/mailbox@7e00b840 at simplebus1 not configured
armpmu0 at simplebus0: Performance Monitor Unit
gpioleds0 at simplebus0: ACT
/soc/timer@7e003000 at simplebus1 not configured
/soc/txp@7e004000 at simplebus1 not configured
bcmrng0 at simplebus1: RNG
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64
cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64
cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64
cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
sdmmc0 at bcmsdhost0
sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
usb0 at dwctwo0: USB revision 2.0
armpmu0: interrupting on local_intc irq 9
uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
sdmmc0: direct I/O error 5, r=6 p=0xffffffc0328fbe4c write
ld0 at sdmmc0: <0x9f:0x5449:SPCC:0x00:0x00000087:0x129>
ld0: 29819 MB, 7573 cyl, 128 head, 63 sec, 512 bytes/sect x 61069312 sectors
ld0: 4-bit width, 25.000 MHz
sdmmc1: 4-bit width, 50.000 MHz
sdmmc1: MAX_BLK_SIZE1 = 64
sdmmc1: MAX_BLK_SIZE2 = 512
sdmmc1: MAX_BLK_SIZE3 = 512
sdmmc1: SDIO function
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
(manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc1 function 3 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 2
uhub1: multiple transaction translators
uhub1: 4 ports with 3 removable, self powered
uhub2 at uhub1 port 1: vendor 0424 (0x424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 3
uhub2: multiple transaction translators
uhub2: 3 ports with 2 removable, self powered
uhub0: autoconfiguration error: illegal enable change, port 1
WARNING: 2 errors while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/9.0/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
mue0 at uhub2 port 1
mue0: SMSC (0x424) LAN7800 USB 3.1 gigabit ethernet device (0x7800), rev 2.10/3.00, addr 4
mue0: LAN7800 id 0x7800 rev 0x2
ukphy0 at mue0 phy 1: SMSC LAN8742 10/100 media interface (OUI 0x00800f, model 0x0013), rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mue0: Ethernet address xx:xx:xx:xx:xx:xx
wsdisplay0: screen 4 added (default, vt100 emulation)