Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-11-05 20:52:52
From: marcello
Description: FreeBSD/amd64 on Hewlett-Packard HP Compaq 6000 Pro SFF PC
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: (disabled in BIOS) HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4299161600 (4100 MB)
avail memory = 4011786240 (3825 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <COMPAQ EAGLLAKE>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20201113/tbfadt-796)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20201113/tbfadt-850)
ioapic0: MADT APIC ID 1 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 3 1 2
Timecounter "TSC-low" frequency 1197022518 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
000.000019 [4354] netmap_init netmap: loaded module
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: <HPQOEM SLIC-BPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1230-0x1237 mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel Q45 SVGA controller> on vgapci0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0.
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
uart2: <4 Series Chipset Serial KT Controller> port 0x1248-0x124f mem 0xf0524000-0xf0524fff irq 17 at device 3.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0x1100-0x111f mem 0xf0500000-0xf051ffff,0xf0525000-0xf0525fff irq 19 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <UHCI (generic) USB controller> port 0x1120-0x113f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <UHCI (generic) USB controller> port 0x1140-0x115f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <UHCI (generic) USB controller> port 0x1160-0x117f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0526800-0xf0526bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801JD HDA Controller> mem 0xf0520000-0xf0523fff irq 21 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci2: <ACPI PCI bus> on pcib2
uhci3: <UHCI (generic) USB controller> port 0x1180-0x119f irq 20 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <UHCI (generic) USB controller> port 0x11a0-0x11bf irq 21 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <UHCI (generic) USB controller> port 0x11c0-0x11df irq 22 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0526c00-0xf0526fff irq 20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0x1250-0x1257,0x1268-0x126b,0x1258-0x125f,0x126c-0x126f,0x11e0-0x11ff mem 0xf0526000-0xf05267ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcd7ff,0xcd800-0xce7ff,0xe5800-0xeffff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 rev1 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC662 rev1 (Analog)> at nid 21 and 25 on hdaa0
pcm2: <Realtek ALC662 rev1 (Front Analog Headphones)> at nid 27 on hdaa0
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0 on usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub1 on usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2 on usbus6
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM
uhub3 on usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4 on usbus7
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen5.1: <Intel UHCI root HUB> at usbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SH00R120GB PAFEC2.0> ACS-4 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
uhub5 on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub6 on usbus5
uhub7 on usbus3
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub7: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
mountroot: waiting for device /dev/ada0s1a...
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
lo0: link state changed to UP
em0: link state changed to UP