Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-11-08 15:45:15
From: jmcneill
Description: NetBSD/evbmips 9.2_STABLE on Lemote Yeeloong 8089B
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.2_STABLE (LOONGSON) #0: Sat Nov 6 13:43:17 UTC 2021 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbmips/compile/LOONGSON [ 1.0000000] Lemote Yeeloong [ 1.0000000] total memory = 1024 MB [ 1.0000000] avail memory = 1005 MB [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: 797.00MHz (hz cycles = 3985000, delay divisor = 399) [ 1.0000000] cpu0: ICT Loongson 2F CPU (0x6303) Rev. 0.3 with MIPS R4010 FPC Rev. 0.1 [ 1.0000000] cpu0: 64 TLB entries, 1TB (40-bit) VAs, 1TB (40-bit) PAs, 16MB max page size [ 1.0000000] cpu0: 64KB/32B 4-way set-associative L1 instruction cache [ 1.0000000] cpu0: 64KB/32B 4-way set-associative write-back L1 data cache [ 1.0000000] cpu0: 512KB/32B 4-way set-associative write-back L2 unified cache [ 1.0000000] bonito0 at mainbus0: Memory and PCI-X controller, rev. 1 [ 1.0000000] pci0 at bonito0 bus 0 [ 1.0000000] pci0: i/o space, memory space enabled [ 1.0000000] rtk0 at pci0 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) [ 1.0000000] rtk0: interrupting at pci intb [ 1.0000000] rtk0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] rlphy0 at rtk0 phy 7: Realtek internal PHY [ 1.0000000] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] lynxfb0 at pci0 dev 8 function 0: vendor 126f product 0712 (rev. 0xb0) [ 1.0000000] lynxfb0: 1024 x 600, 16 bpp, stride 2048 [ 1.0000000] wsdisplay0 at lynxfb0 kbdmux 1: console (default, vt100 emulation) [ 1.0000000] wsmux1: connecting to wsdisplay0 [ 1.0000000] ohci0 at pci0 dev 9 function 0: vendor 1033 product 0035 (rev. 0x44) [ 1.0000000] ohci0: interrupting at pci intd [ 1.0000000] ohci0: OHCI version 1.0 [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] ehci0 at pci0 dev 9 function 1: vendor 1033 product 00e0 (rev. 0x05) [ 1.0000000] ehci0: interrupting at pci intd [ 1.0000000] ehci0: EHCI version 1.0 [ 1.0000000] ehci0: 1 companion controller, 3 ports: ohci0 [ 1.0000000] usb1 at ehci0: USB revision 2.0 [ 1.0000000] gcscpcib0 at pci0 dev 14 function 0: vendor 1022 product 2090 (rev. 0x03) [ 1.0000000] timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000 [ 1.0000030] gcscpcib0: GPIO [ 1.0000030] gpio0 at gcscpcib0: 32 pins [ 1.0000030] viaide0 at pci0 dev 14 function 2: AMD CS5536 IDE Controller (rev. 0x01) [ 1.0000030] viaide0: bus-master DMA support present [ 1.0000030] viaide0: primary channel wired to compatibility mode [ 1.0000030] viaide0: primary channel interrupting at isa irq 14 [ 1.0000030] atabus0 at viaide0 channel 0 [ 1.0000030] viaide0: secondary channel wired to compatibility mode [ 1.0000030] viaide0: secondary channel ignored (disabled) [ 1.0000030] gcscaudio0 at pci0 dev 14 function 3: AMD Geode CS5536 Audio [ 1.0000030] gcscaudio0: interrupting at isa irq 9 [ 1.0000030] gcscaudio0: ac97: Avance Logic ALC655 codec; no 3D stereo [ 1.0000030] gcscaudio0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF> [ 1.0000030] audio0 at gcscaudio0: playback, capture, full duplex, independent [ 1.0000030] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.0000030] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.0000030] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000030] wsbell at spkr0 not configured [ 1.0000030] ohci1 at pci0 dev 14 function 4: vendor 1022 product 2094 (rev. 0x02) [ 1.0000030] ohci1: interrupting at isa irq 11 [ 1.0000030] ohci1: OHCI version 1.0, legacy support [ 1.0000030] usb2 at ohci1: USB revision 1.0 [ 1.0000030] ehci1 at pci0 dev 14 function 5: vendor 1022 product 2095 (rev. 0x02) [ 1.0000030] ehci1: interrupting at isa irq 11 [ 1.0000030] ehci1: EHCI version 1.0 [ 1.0000030] ehci1: 1 companion controller, 4 ports: ohci1 [ 1.0000030] usb3 at ehci1: USB revision 2.0 [ 1.0000030] isa0 at gcscpcib0 [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 mux 0 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.0000030] timecounter: Timecounter "mips3_cp0_counter" frequency 398500000 Hz quality 100 [ 4.2143456] wd0 at atabus0 drive 0 [ 4.2404699] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 4.2958023] uhub0: 3 ports with 3 removable, self powered [ 4.2958023] uhub1 at usb1: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 4.3502565] uhub1: 3 ports with 3 removable, self powered [ 4.3502565] uhub2 at usb2: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 4.4057361] uhub2: 4 ports with 4 removable, self powered [ 4.4057361] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 4.4608367] uhub3: 4 ports with 4 removable, self powered [ 4.4608367] wd0: <ST9160310AS> [ 4.4815206] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.4815206] wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors [ 4.5569014] wd0: 32-bit data port [ 4.5569014] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 4.5669102] wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA), WRITE DMA FUA EXT [ 6.7667762] umass0 at uhub3 port 1 configuration 1 interface 0 [ 6.8074143] umass0: Generic (0xbda) USB2.0-CRW (0x158), rev 2.00/58.87, addr 2 [ 6.8497029] umass0: using SCSI over Bulk-Only [ 6.8497029] scsibus0 at umass0: 2 targets, 1 lun per target [ 6.8847171] sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable [ 6.9325847] sd0: drive offline [ 8.4424961] urtw0 at uhub3 port 4: RTL8187B rev E, address [_MAC_XXXXXXXXXX] [ 9.2318076] urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 9.2642232] urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 9.3271373] boot device: wd0 [ 9.6978160] root on wd0a dumps on wd0b [ 9.7578116] root file system type: ffs [ 9.7850117] kern.module.path=/stand/evbmips/9.2/modules [ 9.8189515] WARNING: preposterous TOD clock time [ 9.8474224] WARNING: using filesystem time [ 9.8742138] WARNING: CHECK AND RESET THE DATE! [ 20.0417879] wsdisplay0: screen 1 added (default, vt100 emulation) [ 20.0518073] wsdisplay0: screen 2 added (default, vt100 emulation) [ 20.0618000] wsdisplay0: screen 3 added (default, vt100 emulation) [ 20.0718012] wsdisplay0: screen 4 added (default, vt100 emulation)