Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-11-08 16:38:31
From: jakllsch
Description: NanoPi NEO Plus2
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.92 (GENERIC64) #0: Sun Nov 7 20:31:09 UTC 2021 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 total memory = 1006 MB avail memory = 970 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated armfdt0 (root) simplebus0 at armfdt0: FriendlyARM NanoPi NEO Plus2 simplebus1 at simplebus0 simplebus2 at simplebus0 cpus0 at simplebus0 simplebus3 at simplebus0 psci0 at simplebus0: PSCI 1.1 cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache cpu0: L2 512KB/64B 16-way (512 set) PIPT Unified cache cpu0: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID cpu0: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache cpu1: L2 512KB/64B 16-way (512 set) PIPT Unified cache cpu1: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID cpu1: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache cpu2: L2 512KB/64B 16-way (512 set) PIPT Unified cache cpu2: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID cpu2: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache cpu3: L2 512KB/64B 16-way (512 set) PIPT Unified cache cpu3: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID cpu3: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add gic0 at simplebus1: GIC armgic0 at gic0: Generic Interrupt Controller, 224 sources (215 valid) armgic0: 16 Priorities, 192 SPIs, 7 PPIs, 16 SGIs fclock0 at simplebus2: 24000000 Hz fixed clock (osc24M) sunxisramc0 at simplebus1: SRAM Controller fclock1 at simplebus2: 32768 Hz fixed clock (ext_osc32k) sun8ih3ccu0 at simplebus1: H3 CCU sunxinmi0 at simplebus1: R_INTC, NMI IRQ 32 sun8ih3rccu0 at simplebus1: H3 PRCM CCU gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on GIC irq 27 armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 sunxide2ccu0 at simplebus1: DE2 CCU sunxigpio0 at simplebus1: PIO gpio0 at sunxigpio0: 94 pins sunxigpio0: interrupting on GIC irq 43 sunxigpio1 at simplebus1: PIO gpio1 at sunxigpio1: 12 pins sunxigpio1: interrupting on GIC irq 77 fregulator0 at simplebus0: vcc3v3 sunxirtc0 at simplebus1: RTC fregulator1 at simplebus0: gmac-3v3 sun6idma0 at simplebus1: DMA controller (12 channels) sun6idma0: interrupting on GIC irq 82 com0 at simplebus1: DesignWare APB UART, 64-byte FIFO com0: console com0: interrupting on GIC irq 32 gregulator0 at simplebus0: vdd-cpux mmcpwrseq0 at simplebus0: Simple MMC power sequence provider sunxiusbphy0 at simplebus1: USB PHY sunxihdmiphy0 at simplebus1: HDMI PHY sunximixer0 at simplebus1: Display Engine Mixer sunxilcdc0 at simplebus1: TCON1 sunxilcdc0: interrupting on GIC irq 118 emac0 at simplebus1: EMAC emac0: Ethernet address [_MAC_XXXXXXXXXX] emac0: interrupting on GIC irq 114 rgephy0 at emac0 phy 7: RTL8211E 1000BASE-T media interface rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto h3codec0 at simplebus1: H3 Audio Codec (analog part) /soc/dram-controller@1c62000 at simplebus1 not configured /soc/eeprom@1c14000 at simplebus1 not configured sunxithermal0 at simplebus1: Thermal sensor controller sunxithermal0: interrupting on GIC irq 63 sunxithermal0: cpu: alarm 51C hyst 24C shut 76C sunxithermal0: gpu: alarm 51C hyst 24C shut 76C sunximmc0 at simplebus1: SD/MMC controller sunximmc0: interrupting on GIC irq 92 sunximmc1 at simplebus1: SD/MMC controller sunximmc1: interrupting on GIC irq 93 sunximmc2 at simplebus1: SD/MMC controller sunximmc2: interrupting on GIC irq 94 /soc/mailbox@1c17000 at simplebus1 not configured motg0 at simplebus1: USB OTG motg0: interrupting on GIC irq 103 usb0 at motg0: USB revision 2.0 ehci0 at simplebus1: EHCI ehci0: interrupting on GIC irq 104 ehci0: EHCI version 1.0 ehci0: 1 companion controller, 1 port usb1 at ehci0: USB revision 2.0 ohci0 at simplebus1: OHCI ohci0: interrupting on GIC irq 105 ohci0: OHCI version 1.0 usb2 at ohci0: USB revision 1.0 ehci1 at simplebus1: EHCI ehci1: interrupting on GIC irq 110 ehci1: EHCI version 1.0 ehci1: 1 companion controller, 1 port usb3 at ehci1: USB revision 2.0 ohci1 at simplebus1: OHCI ohci1: interrupting on GIC irq 111 ohci1: OHCI version 1.0 usb4 at ohci1: USB revision 1.0 sunxiwdt0 at simplebus1: Watchdog sunxiwdt0: default watchdog period is 16 seconds sunxicodec0 at simplebus1: H3 Audio Codec audio0 at sunxicodec0: playback, capture, full duplex, independent audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured sun8icrypto0 at simplebus1: Crypto Engine sun8icrypto0: interrupting on GIC irq 126 /soc/deinterlace@1e00000 at simplebus1 not configured /soc/gpu@1e80000 at simplebus1 not configured armpmu0 at simplebus0: Performance Monitor Unit gpioleds0 at simplebus0: nanopi:green:pwr nanopi:red:status /soc/timer@1c20c00 at simplebus1 not configured /soc/video-codec@1c0e000 at simplebus1 not configured entropy: WARNING: extracting entropy too early timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 sdmmc0 at sunximmc0 sdmmc1 at sunximmc2 sun8icrypto0: AES-128 self-test initiated uhub0 at usb0: NetBSD (0x0000) MOTG root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered sun8icrypto0: AES-128 self-test passed armpmu0: interrupting on GIC irq 148 armpmu0: interrupting on GIC irq 149 armpmu0: interrupting on GIC irq 150 armpmu0: interrupting on GIC irq 151 uhub1 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 1 port with 1 removable, self powered uhub2 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered uhub3 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 1 port with 1 removable, self powered uhub4 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 uhub4: 1 port with 1 removable, self powered IPsec: Initialized Security Association Processing. aes: ARMv8.0-AES chacha: ARM NEON ChaCha ld1 at sdmmc1: <0x15:0x0100:8WPD3R:0x00:0x8493fa71:0x000> ld1: 7456 MB, 3787 cyl, 64 head, 63 sec, 512 bytes/sect x 15269888 sectors ld1: 8-bit width, 64 MB cache, 52.000 MHz sdmmc2 at sunximmc1 sdmmc2: 4-bit width, 50.000 MHz bwfm0 at sdmmc2 function 1 (manufacturer 0x2d0, product 0xa9a6) at sdmmc2 function 2 not configured boot device: ld1 root on ld1a dumps on ld1b root file system type: ffs kern.module.path=/stand/evbarm/9.99.92/modules bwfm0: Firmware file default: brcmfmac43430-sdio.bin bwfm0: Firmware file model-spec: brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.bin bwfm0: Found Firmware file: brcmfmac43430-sdio.bin bwfm0: NVRAM file default: brcmfmac43430-sdio.txt bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt bwfm0: Found NVRAM file: brcmfmac43430-sdio.txt bwfm0: CHIPACTIVE bwfm0: wl0: Oct 23 2017 03:55:53 version[_IP_XXXXX] (r674442 CY) FWID 01-e58d219f bwfm0: address [_MAC_XXXXXXXXXX]