Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-11-10 17:34:09
From: msaitoh
Description: CHUWI HeroBox Pro (Celeron N4500(JasperLake))
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.92 (GENERIC) #12: Wed Nov 10 23:40:28 JST 2021
[_EMAIL_XXXXXXXXXXXXXXXXX]:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 8036 MB
avail memory = 7756 MB
timecounter: Timecounters tick every 10.000 msec
NET_MPSAFE enabled
Kernelized RAIDframe activated
RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 78efe018
mainbus0 (root)
ACPI: RSDP 0x0000000078834014 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000078833728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x000000007882B000 000114 (v06 ALASKA A M I 01072009 AMI 01000013)
ACPI: DSDT 0x00000000787E6000 044400 (v02 ALASKA A M I 01072009 INTL 20191018)
ACPI: FACS 0x0000000078933000 000040
ACPI: MCFG 0x0000000078832000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007882C000 005929 (v02 DptfTb DptfTabl 00001000 INTL 20191018)
ACPI: FIDT 0x00000000787E5000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MSDM 0x00000000787E4000 000055 (v03 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000787E1000 0025EE (v02 CpuRef CpuSsdt 00003000 INTL 20191018)
ACPI: SSDT 0x00000000787DF000 001CCD (v02 SaSsdt SaSsdt 00003000 INTL 20191018)
ACPI: SSDT 0x00000000787DB000 0032CD (v02 INTEL IgfxSsdt 00003000 INTL 20191018)
ACPI: HPET 0x00000000787DA000 000038 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: APIC 0x00000000787D9000 00012C (v04 ALASKA A M I 01072009 AMI 01000013)
ACPI: PRAM 0x00000000787D8000 000030 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000787D7000 000E06 (v02 ALASKA Ther_Rvp 00001000 INTL 20191018)
ACPI: SSDT 0x00000000787D3000 003005 (v02 INTEL xh_jslv2 00000000 INTL 20191018)
ACPI: NHLT 0x00000000787D2000 0001FB (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: LPIT 0x00000000787D1000 000094 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: SSDT 0x00000000787CD000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20191018)
ACPI: SSDT 0x00000000787CC000 000122 (v02 ALASKA TbtTypeC 00000000 INTL 20191018)
ACPI: DBGP 0x00000000787CB000 000034 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: DBG2 0x00000000787CA000 000054 (v00 ALASKA A M I 01072009 AMI 01000013)
ACPI: DMAR 0x00000000787C9000 000088 (v02 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x00000000787C8000 000144 (v02 Intel ADebTabl 00001000 INTL 20191018)
ACPI: TPM2 0x00000000787C7000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: WSMT 0x00000000787D0000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000787C6000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
Firmware Error (ACPI): Could not resolve symbol [\_SB.PC00.XHCI.RHUB.SS04], AE_NOT_FOUND (20210930/dswload2-206)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20210930/psobject-264)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: CPU base freq 1100000000 Hz
cpu0: CPU max freq 2800000000 Hz
cpu0: TSC freq CPUID 1113600000 Hz
cpu0: Intel(R) Celeron(R) N4500 @ 1.10GHz, id 0x906c0
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) N4500 @ 1.10GHz, id 0x906c0
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20210930
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000c0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC9E7151688 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC877F32748 000227 (v02 PmRef Cpu0Ist 00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC878033288 0001B8 (v02 PmRef Cpu0Psd 00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC8780E0008 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC8780E1008 0004D2 (v02 PmRef ApPsd 00003000 INTL 20191018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9EC8780E1808 00048A (v02 PmRef ApCst 00003000 INTL 20191018)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
SEN3 (INTC1043) at acpi0 not configured
SEN4 (INTC1043) at acpi0 not configured
SEN5 (INTC1043) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (DD2F, 0x001f): ACPI Display Output Device
acpiout16: brightness levels: [0-100]
acpivga0: connected output devices:
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
ESSX (ESSX8336) at acpi0 not configured
AWAC (ACPI000E) at acpi0 not configured
GPI0 (INT34C8) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (WFDE, PNP0C14-DSarDev): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WFTE, PNP0C14-TestDev): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
PEPD (INT33A1) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
TPM (MSFT0101) at acpi0 not configured
IETM (INTC1040) at acpi0 not configured
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 103.0 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 7F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Jasper Lake Processor Transaction Router (SKU 2) (rev. 0x00)
genfb0 at pci0 dev 2 function 0: Intel Jasper Lake GPU 16 EU (rev. 0x01)
genfb0: framebuffer at 0x4000000000, size 1024x768, depth 32, stride 4096
genfb0: shadow framebuffer enabled, size 3072 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
Intel Jasper Lake DPTF (miscellaneous DASP) at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0: Intel Jasper Lake USB Host (xHCI) (rev. 0x01)
xhci0: 64-bit DMA
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10
usb0 at xhci0: USB revision 3.1
usb1 at xhci0: USB revision 2.0
Intel Jasper Lake Shared SRAM (RAM memory, revision 0x01) at pci0 dev 20 function 2 not configured
sdhc0 at pci0 dev 20 function 5: Intel Jasper Lake SD Card (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 19
sdhc0: SDHC 3.0, rev 16, caps <3568c881/00000807>, SDMA, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.3V, re-tuning mode 1 (128s timer), 512 byte blocks
sdmmc0 at sdhc0 slot 0
dwiic0 at pci0 dev 21 function 0autoconfiguration error: : can't map register space
dwiic1 at pci0 dev 21 function 1autoconfiguration error: : can't map register space
Intel Jasper Lake HECI 1 (miscellaneous communications, revision 0x01) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: Intel Jasper Lake SATA (AHCI) (rev. 0x01)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xe534ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi1 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
sdhc1 at pci0 dev 26 function 0: Intel Jasper Lake eMMC (rev. 0x01)
sdhc1: interrupting at ioapic0 pin 16
sdhc1: SDHC 3.0, rev 16, caps <546ec881/80000807>, SDMA, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 2048 byte blocks
sdmmc1 at sdhc1 slot 0
ppb0 at pci0 dev 28 function 0: Intel Jasper Lake PCIe Root Port 1 (rev. 0x01)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
re0: interrupting at msix2 vec 0
re0: RTL8168H/8111H (0x5400)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel Jasper Lake PCIe Root Port 2 (rev. 0x01)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Realtek Semiconductor RTL8821CE 802.11ac PCIe NIC (miscellaneous network) at pci2 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0: Intel Jasper Lake eSPI (rev. 0x01)
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi3 vec 0
hdaudio0: HDA ver. 1.0, OSS 6, ISS 7, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: vendor 8086 product 281a
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ichsmb0 at pci0 dev 31 function 4: Intel Jasper Lake SMBus (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
Intel Jasper Lake SPI (FLASH) (miscellaneous serial bus, revision 0x01) at pci0 dev 31 function 5 not configured
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 253 us, pow 200 mW
acpicpu0: C3: FFH, lat 1048 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 6000 mW, 1101 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 6000 mW, 1100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 5338 mW, 1000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 4749 mW, 900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 4173 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
cpu0: CPU base freq 1100000000 Hz
cpu0: CPU max freq 2800000000 Hz
cpu0: TSC freq CPUID 1113600000 Hz
cpu0: TSC freq calibrated 1113614000 Hz
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1113614000 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
aes: Intel AES-NI
chacha: x86 SSE2 ChaCha
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
sdmmc1: autoconfiguration error: couldn't enable card: 60
wd0 at atabus0 drive 0
wd0: <Netac S535N8/256GYN>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: GPT GUID: adbea447-f329-4102-b4d0-79161568e1bd
dk0 at wd0: "EFI system partition", 204800 blocks at 2048, type: msdos
dk1 at wd0: "Microsoft reserved partition", 32768 blocks at 206848, type: <unknown>
dk2 at wd0: "Basic data partition", 497854464 blocks at 239616, type: ntfs
dk3 at wd0: "a443e905-2d77-480b-bd20-f2083b458d09", 2023424 blocks at 498094080, type: <unknown>
autoconfiguration error: wd0: wedge named 'Basic data partition' already existed, using 'a443e905-2d77-480b-bd20-f2083b458d09'
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <CT500MX500SSD1>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors (4096 bytes/physsect; first aligned sector: 8)
wd1: GPT GUID: 2ef0022d-d812-40b3-aeae-1b3162f3652c
dk4 at wd1: "5b16bd84-2d5b-42df-b51c-f306e6ec3c28", 262144 blocks at 2048, type: msdos
dk5 at wd1: "26911e9c-8140-4687-82d5-bbd5ef10d580", 960049152 blocks at 264192, type: ffs
dk6 at wd1: "3facf848-8144-4f42-94f4-12ca9bf3573c", 16459776 blocks at 960313344, type: swap
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: vendor 15d9 (0x15d9) USB OPTICAL MOUSE (0x0a4c), rev 1.10/1.00, addr 1, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
ubt0 at uhub1 port 8
ubt0: Realtek (0x0bda) Bluetooth Radio (0xc821), rev 1.10/1.10, addr 2
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd1
root on dk5 dumps on dk6
root file system type: ffs
kern.module.path=/stand/amd64/9.99.92/modules
clock: unknown CMOS layout
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)