Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2021-11-25 23:12:04
From: Chicho
Description: FreeBSD 13.0-RELEASE on a Compulab fitlet2
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (1593.68-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x79<RDCL_NO,SKIP_L1DFL_VME,SSB_NO,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3881619456 (3701 MB)
CPU microcode: updated from 0x40 to 0x44
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 3 1
Timecounter "TSC" frequency 1593678407 Hz quality 1000
KTLS: Initialized 4 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
000.000055 [4354] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
ossl0: <OpenSSL crypto>
acpi0: <ALASKA A M I >
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x7ffff00000-0x7ffff03fff,0x7fffe00000-0x7fffefffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xc1210000-0xc1211fff,0xc1213000-0xc12130ff,0xc1212000-0xc12127ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xc1100000-0xc111ffff,0xc1120000-0xc1123fff at device 0.0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xc1000000-0xc101ffff,0xc1020000-0xc1023fff at device 0.0 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0xc1200000-0xc120ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1150 (Rear Analog)> at nid 26 and 24 on hdaa0
pcm1: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <M2SCF-6M 32GB Q0707A> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30208MB (61865984 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: usbus0
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 15 ports with 15 removable, self powered
GEOM_ELI: Device gpt/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ig4iic0: <Intel Apollo Lake I2C Controller-0> mem 0x7ffff1a000-0x7ffff1afff,0x7ffff19000-0x7ffff19fff irq 27 at device 22.0 on pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Intel Apollo Lake I2C Controller-1> mem 0x7ffff18000-0x7ffff18fff,0x7ffff17000-0x7ffff17fff irq 28 at device 22.1 on pci0
ig4iic1: Using MSI
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
ig4iic2: <Intel Apollo Lake I2C Controller-2> mem 0x7ffff16000-0x7ffff16fff,0x7ffff15000-0x7ffff15fff irq 29 at device 22.2 on pci0
ig4iic2: Using MSI
iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2
ig4iic3: <Intel Apollo Lake I2C Controller-3> mem 0x7ffff14000-0x7ffff14fff,0x7ffff13000-0x7ffff13fff irq 30 at device 22.3 on pci0
ig4iic3: Using MSI
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3
ig4iic4: <Intel Apollo Lake I2C Controller-4> mem 0x7ffff12000-0x7ffff12fff,0x7ffff11000-0x7ffff11fff irq 31 at device 23.0 on pci0
ig4iic4: Using MSI
iicbus4: <Philips I2C bus (ACPI-hinted)> on ig4iic4
ig4iic5: <Intel Apollo Lake I2C Controller-5> mem 0x7ffff10000-0x7ffff10fff,0x7ffff0f000-0x7ffff0ffff irq 32 at device 23.1 on pci0
ig4iic5: Using MSI
iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic5
ig4iic6: <Intel Apollo Lake I2C Controller-6> mem 0x7ffff0e000-0x7ffff0efff,0x7ffff0d000-0x7ffff0dfff irq 33 at device 23.2 on pci0
ig4iic6: Using MSI
iicbus6: <Philips I2C bus (ACPI-hinted)> on ig4iic6
ig4iic7: <Intel Apollo Lake I2C Controller-7> mem 0x7ffff0c000-0x7ffff0cfff,0x7ffff0b000-0x7ffff0bfff irq 34 at device 23.3 on pci0
ig4iic7: Using MSI
iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic7
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x7ffff04000-0x7ffff040ff at device 31.1 on pci0
smbus0: <System Management Bus> on ichsmb0
igb0: changing name to 'wan0'
igb1: changing name to 'lan0'
lo0: link state changed to UP
vlan0: changing name to 'data'
vlan1: changing name to 'voice'
vlan2: changing name to 'guest'
pflog0: promiscuous mode enabled
wan0: link state changed to UP
lan0: link state changed to UP
guest: link state changed to UP
data: link state changed to UP
voice: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)