Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-12-23 22:19:50
From: jmcneill
Description: NetBSD/evbarm 9.99.93 on PINE64 Quartz64 Model A
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.93 (GENERIC64) #0: Wed Dec 22 21:45:02 UTC 2021 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 [ 1.0000000] total memory = 7884 MB [ 1.0000000] avail memory = 7612 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] armfdt0: using EFI runtime services for RTC [ 1.0000000] simplebus0 at armfdt0: Pine64 PINE64 Quartz64 Model A [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] acpifdt0 at simplebus0 [ 1.0000000] acpifdt0: SMBIOS rev. 3.3.0 @ 0x1fbed0000 [ 1.0000000] ACPI: RSDP 0x00000001F8AE0018 000024 (v02 PINE64) [ 1.0000000] ACPI: XSDT 0x00000001F8AEFE98 000054 (v01 PINE64 QUARTZ64 00000001 01000013) [ 1.0000000] ACPI: FACP 0x00000001F8AEFB98 000114 (v06 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: DSDT 0x00000001F8AEEC18 000568 (v02 RKCP RK356X 00000002 INTL 20190509) [ 1.0000000] ACPI: DBG2 0x00000001F8AEFA98 00005C (v00 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: GTDT 0x00000001F8AEFD18 000068 (v03 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: APIC 0x00000001F8AEE998 0001AC (v04 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: MCFG 0x00000001F8AEFE18 00003C (v01 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: SPCR 0x00000001F8AEFF98 000050 (v02 PINE64 QUARTZ64 00000001 EDK2 00000001) [ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000000] acpi0 at acpifdt0: Intel ACPICA 20211217 [ 1.0000000] cpu0 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0 [ 1.0000000] cpu0: package 0, core 0, smt 0 [ 1.0000000] cpu1 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100 [ 1.0000000] cpu1: package 0, core 1, smt 0 [ 1.0000000] cpu2 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200 [ 1.0000000] cpu2: package 0, core 2, smt 0 [ 1.0000000] cpu3 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300 [ 1.0000000] cpu3: package 0, core 3, smt 0 [ 1.0000000] gicvthree0 at acpi0: GICv3 [ 1.0000000] gicvthree0: GICv2m @ 0xfd410000, SPIs 296-320 [ 1.0000000] gtmr0 at acpi0: irq 27 [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.0000030] CPU0 (ACPI0007) at acpi0 not configured [ 1.0000030] CPU1 (ACPI0007) at acpi0 not configured [ 1.0000030] CPU2 (ACPI0007) at acpi0 not configured [ 1.0000030] CPU3 (ACPI0007) at acpi0 not configured [ 1.0000030] com0 at acpi0 (COM0, HISI0031-0): mem 0xfe660000-0xfe660fff irq 150 [ 1.0000030] com: DesignWare APB UART, 64-byte FIFO [ 1.0000030] com0: console [ 1.0000030] ehci0 at acpi0 (EHC0, PNP0D20-0): mem 0xfd800000-0xfd83ffff irq 162 ehci0: ohci or uhci probably not configured [ 1.0000030] ehci0: Using DMA subregion for control data structures [ 1.0000030] usb0 at ehci0: USB revision 2.0 [ 1.0000030] OHC0 (RKCP0DFF) at acpi0 not configured [ 1.0000030] ehci1 at acpi0 (EHC1, PNP0D20-1): mem 0xfd880000-0xfd8bffff irq 165 ehci1: ohci or uhci probably not configured [ 1.0000030] ehci1: Using DMA subregion for control data structures [ 1.0000030] usb1 at ehci1: USB revision 2.0 [ 1.0000030] OHC1 (RKCP0DFF) at acpi0 not configured [ 1.0000030] xhci0 at acpi0 (XHC0, PNP0D10-0): mem 0xfcc00000-0xfcffffff irq 201 [ 1.0000030] usb2 at xhci0: USB revision 3.0 [ 1.0000030] usb3 at xhci0: USB revision 2.0 [ 1.0000030] xhci1 at acpi0 (XHC1, PNP0D10-1): mem 0xfd000000-0xfd3fffff irq 202 [ 1.0000030] usb4 at xhci1: USB revision 3.0 [ 1.0000030] usb5 at xhci1: USB revision 2.0 [ 1.0000030] acpipchb0 at acpi0 (PCI0, PNP0A08): PCI Express Host Bridge [ 1.0000030] pci0 at acpipchb0 bus 1 [ 1.0000030] ahcisata0 at pci0 dev 0 function 0: vendor 197b product 0585 (rev. 0x00) [ 1.0000030] ahcisata0: AHCI revision 1.31, 5 ports, 32 slots, CAP 0xef33ff84<CCCS,PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> [ 1.0000030] ahcisata0: interrupting at irq 296 (MSI vec 0) [ 1.0000030] atabus0 at ahcisata0 channel 0 [ 1.0000030] atabus1 at ahcisata0 channel 1 [ 1.0000030] genfb0 at simplebus1: Simple Framebuffer (1280x720 32-bpp @ 0xefc50000) [ 1.0000030] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.0000030] entropy: WARNING: extracting entropy too early [ 1.3502250] uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.3602315] uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.3702275] uhub2 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.3802284] uhub3 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.3902279] cpu0: PMU interrupting on irq 260 [ 1.4002327] cpu1: PMU interrupting on irq 261 [ 1.4002327] cpu2: PMU interrupting on irq 262 [ 1.4102292] cpu3: PMU interrupting on irq 263 [ 1.4102292] uhub4 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.4202322] uhub5 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.4902322] ahcisata0 port 0: device present, speed: 6.0Gb/s [ 1.5202340] wd0 at atabus0 drive 0 [ 1.5202340] wd0: <CT250MX500SSD4> [ 1.5202340] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors (4096 bytes/physsect; first aligned sector: 8) [ 1.8902475] umass0 at uhub1 port 1 configuration 1 interface 0 [ 1.8902475] umass0: Lexar (0x05dc) USB Flash Drive (0xa81d), rev 2.00/11.00, addr 1 [ 1.9002479] scsibus0 at umass0: 2 targets, 1 lun per target [ 1.9102486] ure0 at uhub3 port 1 [ 1.9102486] ure0: CMI (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 1 [ 1.9202495] ure0: RTL8153 ver 5c30 [ 1.9802509] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 1.9902516] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 2.0002522] ure0: Ethernet address [_MAC_XXXXXXXXXX] [ 2.4802694] sd0 at scsibus0 target 0 lun 0: <Lexar, USB Flash Drive, 1100> disk removable [ 2.4906749] sd0: 30526 MB, 1023 cyl, 255 head, 63 sec, 512 bytes/sect x 62517248 sectors [ 2.5002713] dk0 at sd0: "EFI", 163840 blocks at 32768, type: msdos [ 2.5002713] dk1 at sd0: "netbsd-root", 2695168 blocks at 196608, type: ffs [ 2.5202750] WARNING: 2 errors while detecting hardware; check system log. [ 2.5202750] boot device: dk1 [ 2.5302747] root on dk1 [ 2.5402742] root file system type: ffs [ 2.5402742] kern.module.path=/stand/evbarm/9.99.93/modules