Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-12-31 10:54:56
From: smj
Description: FreeBSD/amd64 on HP ProLiant DL380 Gen9
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
module_register: cannot register pci/bce from kernel; already loaded from if_bce.ko
Module pci/bce failed to register: 17
module_register: cannot register bce/miibus from kernel; already loaded from if_bce.ko
Module bce/miibus failed to register: 17
module_register: cannot register pci/ix from kernel; already loaded from if_ix.ko
Module pci/ix failed to register: 17
CPU: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (2597.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 274877906944 (262144 MB)
avail memory = 267560722432 (255165 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 30 14 13 28 21 8 3 9 27 11 2 26 22 17 7 18 31 16 5 12 23 20 4 19 29 6 10 15 24 25
Timecounter "TSC-low" frequency 1298523468 Hz quality 1000
KTLS: Initialized 32 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000083 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x92e00000-0x92ffffff,0x93004000-0x93007fff at device 0.0 numa-domain 0 on pci7
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0x92c00000-0x92dfffff,0x93000000-0x93003fff at device 0.1 numa-domain 0 on pci7
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib8: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
mps0: <Avago Technologies (LSI) SAS2008> port 0x2000-0x20ff mem 0x93680000-0x93683fff,0x93600000-0x9363ffff at device 0.0 numa-domain 0 on pci9
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib10: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci2: <dasp, performance counters> at device 5.6 (no driver attached)
pci2: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93b01000-0x93b013ff at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci14
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib15: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
bge0: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x93190000-0x9319ffff,0x931a0000-0x931affff,0x931b0000-0x931bffff at device 0.0 numa-domain 0 on pci15
bge0: APE FW version: NCSI v1.5.27.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x93160000-0x9316ffff,0x93170000-0x9317ffff,0x93180000-0x9318ffff at device 0.1 numa-domain 0 on pci15
bge1: APE FW version: NCSI v1.5.27.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
bge2: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x93130000-0x9313ffff,0x93140000-0x9314ffff,0x93150000-0x9315ffff at device 0.2 numa-domain 0 on pci15
bge2: APE FW version: NCSI v1.5.27.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <HPE Ethernet 1Gb 4-port 331i Adapter, ASIC rev. 0x5719001> mem 0x93100000-0x9310ffff,0x93110000-0x9311ffff,0x93120000-0x9312ffff at device 0.3 numa-domain 0 on pci15
bge3: APE FW version: NCSI v1.5.27.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib16: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2
pci17: <ACPI PCI bus> numa-domain 0 on pcib17
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93b00000-0x93b003ff at device 29.0 numa-domain 0 on pci2
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
pcib18: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci18
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci18
pci20: <ACPI PCI bus> numa-domain 1 on pcib20
mps1: <Avago Technologies (LSI) SAS2008> port 0xa000-0xa0ff mem 0xc8480000-0xc8483fff,0xc8400000-0xc843ffff at device 0.0 numa-domain 1 on pci20
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci18
pci21: <ACPI PCI bus> numa-domain 1 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci18
pci22: <ACPI PCI bus> numa-domain 1 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci18
pci23: <ACPI PCI bus> numa-domain 1 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci18
pci24: <ACPI PCI bus> numa-domain 1 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci18
pci25: <ACPI PCI bus> numa-domain 1 on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci18
pci26: <ACPI PCI bus> numa-domain 1 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci18
pci27: <ACPI PCI bus> numa-domain 1 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci18
pci28: <ACPI PCI bus> numa-domain 1 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci18
pci29: <ACPI PCI bus> numa-domain 1 on pcib29
pci18: <dasp, performance counters> at device 5.6 (no driver attached)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c5d00001c00
device_attach: est31 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <HP UHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1 numa-domain 0 on usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2 numa-domain 0 on usbus2
uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3 numa-domain 0 on usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from zfs:zetA/os []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 21 ports with 21 removable, self powered
Root mount waiting for: CAM usbus0 usbus1 usbus3
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub4 numa-domain 0 on uhub1
uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub5 numa-domain 0 on uhub3
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub6 numa-domain 0 on uhub0
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub5: 6 ports with 6 removable, self powered
uhub4: 2 ports with 1 removable, self powered
uhub6: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub7 numa-domain 0 on uhub1
uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
Root mount waiting for: CAM usbus0
uhub7: 4 ports with 4 removable, self powered
ugen0.4: <CHICONY USB NetVista Full Width Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub7
ukbd0: <CHICONY USB NetVista Full Width Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: CAM usbus0
ugen0.5: <Logitech USB Laser Mouse> at usbus0
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <HITACHI HUC106060CSS601 MS09> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 572325MB (1172123568 512 byte sectors, DIF type 2)
da2 at mps1 bus 0 scbus1 target 0 lun 0
da2: <HITACHI HUC106060CSS601 MS09> Fixed Direct Access SPC-4 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 572325MB (1172123568 512 byte sectors, DIF type 2)
da1 at mps0 bus 0 scbus0 target 2 lun 0
da1: <HITACHI HUC106060CSS601 MS09> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 572325MB (1172123568 512 byte sectors, DIF type 2)
da3 at mps1 bus 0 scbus1 target 1 lun 0
da3: <HITACHI HUC106060CSS601 MS09> Fixed Direct Access SPC-4 SCSI device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 572325MB (1172123568 512 byte sectors, DIF type 2)
ioat0: <HSW IOAT Ch0> mem 0x39ffff2c000-0x39ffff2ffff at device 4.0 numa-domain 0 on pci2
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <HSW IOAT Ch1> mem 0x39ffff28000-0x39ffff2bfff at device 4.1 numa-domain 0 on pci2
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <HSW IOAT Ch2> mem 0x39ffff24000-0x39ffff27fff at device 4.2 numa-domain 0 on pci2
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <HSW IOAT Ch3> mem 0x39ffff20000-0x39ffff23fff at device 4.3 numa-domain 0 on pci2
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <HSW IOAT Ch4> mem 0x39ffff1c000-0x39ffff1ffff at device 4.4 numa-domain 0 on pci2
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <HSW IOAT Ch5> mem 0x39ffff18000-0x39ffff1bfff at device 4.5 numa-domain 0 on pci2
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <HSW IOAT Ch6> mem 0x39ffff14000-0x39ffff17fff at device 4.6 numa-domain 0 on pci2
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <HSW IOAT Ch7> mem 0x39ffff10000-0x39ffff13fff at device 4.7 numa-domain 0 on pci2
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ichsmb0: <Intel Wellsburg SMBus controller> port 0x3000-0x301f mem 0x39ffff31000-0x39ffff310ff at device 31.3 numa-domain 0 on pci2
smbus0: <System Management Bus> numa-domain 0 on ichsmb0
ioat8: <HSW IOAT Ch0> mem 0x3bffff1c000-0x3bffff1ffff at device 4.0 numa-domain 1 on pci18
ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat9: <HSW IOAT Ch1> mem 0x3bffff18000-0x3bffff1bfff at device 4.1 numa-domain 1 on pci18
ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat10: <HSW IOAT Ch2> mem 0x3bffff14000-0x3bffff17fff at device 4.2 numa-domain 1 on pci18
ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat11: <HSW IOAT Ch3> mem 0x3bffff10000-0x3bffff13fff at device 4.3 numa-domain 1 on pci18
ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat12: <HSW IOAT Ch4> mem 0x3bffff0c000-0x3bffff0ffff at device 4.4 numa-domain 1 on pci18
ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat13: <HSW IOAT Ch5> mem 0x3bffff08000-0x3bffff0bfff at device 4.5 numa-domain 1 on pci18
ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat14: <HSW IOAT Ch6> mem 0x3bffff04000-0x3bffff07fff at device 4.6 numa-domain 1 on pci18
ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat15: <HSW IOAT Ch7> mem 0x3bffff00000-0x3bffff03fff at device 4.7 numa-domain 1 on pci18
ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
driver bug: Unable to set devclass (class: atrtc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
lo0: link state changed to UP
ix0: link state changed to UP
ix0: link state changed to DOWN
ix0: link state changed to UP
ums0 numa-domain 0 on uhub7
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/56.01, addr 4> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0