Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-01-01 20:01:17
From: plunky
Description: Thinkpad T61p
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.92 (GENERIC.amd64) #0: Sat Dec 25 10:43:32 GMT 2021
[_EMAIL_XXXXXXXXXXXXXX]:/var/work/NetBSD-current/obj/sys/arch/amd64/compile/GENERIC
total memory = 4030 MB
avail memory = 3878 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F68D0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BFEBB8FD 000094 (v01 LENOVO TP-7L 00001210 LTP 00000000)
ACPI: FACP 0x00000000BFEBBA00 0000F4 (v03 LENOVO TP-7L 00001210 LNVO 00000001)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20211217/tbfadt-640)
Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20211217/tbfadt-688)
ACPI: DSDT 0x00000000BFEBBE0C 00FD64 (v01 LENOVO TP-7L 00001210 MSFT 03000000)
ACPI: FACS 0x00000000BFEE4000 000040
ACPI: SSDT 0x00000000BFEBBBB4 000258 (v01 LENOVO TP-7L 00001210 MSFT 03000000)
ACPI: ECDT 0x00000000BFECBB70 000052 (v01 LENOVO TP-7L 00001210 LNVO 00000001)
ACPI: TCPA 0x00000000BFECBBC2 000032 (v02 LENOVO TP-7L 00001210 LNVO 00000001)
ACPI: APIC 0x00000000BFECBBF4 000068 (v01 LENOVO TP-7L 00001210 LNVO 00000001)
ACPI: MCFG 0x00000000BFECBC5C 00003C (v01 LENOVO TP-7L 00001210 LNVO 00000001)
ACPI: HPET 0x00000000BFECBC98 000038 (v01 LENOVO TP-7L 00001210 LNVO 00000001)
ACPI: SLIC 0x00000000BFECBDF0 000176 (v01 LENOVO TP-7L 00001210 LTP 00000000)
ACPI: BOOT 0x00000000BFECBF66 000028 (v01 LENOVO TP-7L 00001210 LTP 00000001)
ACPI: ASF! 0x00000000BFECBF8E 000072 (v16 LENOVO TP-7L 00001210 PTL 00000001)
ACPI: SSDT 0x00000000BFEE26D9 00025F (v01 LENOVO TP-7L 00001210 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2938 0000A6 (v01 LENOVO TP-7L 00001210 INTL 20050513)
ACPI: SSDT 0x00000000BFEE29DE 0004F7 (v01 LENOVO TP-7L 00001210 INTL 20050513)
ACPI: SSDT 0x00000000BFEE2ED5 0001D8 (v01 LENOVO TP-7L 00001210 INTL 20050513)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, id 0x6fb
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, id 0x6fb
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20211217
acpi0: X/RSDT: OemId <LENOVO,TP-7L ,00001210>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89434E893748 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89434E8AF808 00061E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8943827BCE08 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89434E8F9A08 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
tpm0 at acpi0 (TPM, ATM1200): mem 0xfed40000-0xfed44fff
tpm0: device 0x32031114 rev 0x9
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: version 0100
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0120): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0120 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Passthrough, Palm detect, Two button click pad, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82965PM Host Bridge (rev. 0x0c)
agp0 at pchb0autoconfiguration error: : can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: Intel 80862A01 Mobile PCI Express Root Port (rev. 0x0c)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nouveau0 at pci1 dev 0 function 0: NVIDIA product 040c (rev. 0xa1)
wm0 at pci0 dev 25 function 0, 64-bit DMA: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.3.0
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x2a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL>
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: vendor 11d4 product 1984
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdvsmfg at hdaudio0 not configured
ppb1 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: Intel Wireless WiFi Link 4965 (rev. 0x61)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 2T3R, MoW2, address [_MAC_XXXXXXXXXX]
ppb3 at pci0 dev 28 function 2: Intel 82801H PCI Express Port #3 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x03)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x03)
ppb5: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci6 at ppb5 bus 13
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb6 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci7 at ppb6 bus 21
pci7: i/o space, memory space enabled
cbb0 at pci7 dev 0 function 0: Ricoh 5C476 PCI-CardBus Bridge (rev. 0xba)
fwohci0 at pci7 dev 0 function 1: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:e7:d2
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci7 dev 0 function 2: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, caps <01e021a1/00000000>, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
Ricoh 5C843 PCI-CardBus Bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x11) at pci7 dev 0 function 3 not configured
Ricoh 5C592 PCI-CardBus Bridge/MS/SD/Firewire (miscellaneous system, revision 0x11) at pci7 dev 0 function 4 not configured
Ricoh xD-Picture Card Controller (miscellaneous system, revision 0x11) at pci7 dev 0 function 5 not configured
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: Intel 82801HEM LPC Interface Bridge (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM AHCI SATA Controller (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe710ff82<CCCS,PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2201 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 23000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 1200 MHz
acpicpu0: P4: FFH, lat 10 us, pow 14000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12250 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10500 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8750 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5250 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3500 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1750 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
aes: Intel SSSE3 vpaes
chacha: x86 SSE2 ChaCha
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-852, HC43 281322, RB02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0
wd0: <Seagate BarraCuda SSD ZA250CM10002>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
ehci0: handing over full speed device on port 1 to uhci0
ehci0: handing over full speed device on port 2 to uhci0
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.99.92/modules
nouveau0: info: NVIDIA G84 (084c00a2)
nouveau0: info: bios: version[_IP_XXXXXX].00
nouveau0: interrupting at ioapic0 pin 16 (nouveau0)
nouveau0: info: fb: 256 MiB GDDR3
Zone kernel: Available graphics memory: 995528 KiB
nouveau0: info: DRM: VRAM: 256 MiB
nouveau0: info: DRM: GART: 1048576 MiB
nouveau0: info: DRM: TMDS table version 2.0
nouveau0: info: DRM: DCB version 4.0
nouveau0: info: DRM: DCB outp 00: 01000323 00010034
nouveau0: info: DRM: DCB outp 01: 02811300 00000028
nouveau0: info: DRM: DCB outp 02: 02822312 00010030
nouveau0: info: DRM: DCB conn 00: 0040
nouveau0: info: DRM: DCB conn 01: 0100
nouveau0: info: DRM: DCB conn 02: 1231
nouveau0: info: DRM: MM: using CRYPT for buffer copies
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
nouveaufb0 at nouveau0
kern info: [drm] Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
nouveaufb0: framebuffer at 0xe0006000, size 1680x1050, depth 32, stride 6912
nouveau0: autoconfiguration error: error: DRM: core notifier timeout
nouveau0: autoconfiguration error: error: DRM: base-0: timeout
wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ubt0 at uhub0 port 1
ubt0: Broadcom Corp (0x0a5c) BCM20702A0 (0x21e6), rev 2.00/1.12, addr 2
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)