Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-01-03 13:24:35
From: root
Description: FreeBSD/amd64 on Supermicro X9SCL/X9SCM
---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-RELEASE r371126 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.09-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7dbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16593940480 (15825 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 5 4 3 6 7 2 Timecounter "TSC-low" frequency 1650046526 Hz quality 1000 random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. 000.000017 [4344] netmap_init netmap: loaded module WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff811848f0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xdfb04000-0xdfb043ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xdfa00000-0xdfa1ffff,0xdfa20000-0xdfa23fff irq 16 at device 0.0 on pci2 em0: EEPROM V2.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 18 at device 0.0 on pci3 em1: EEPROM V2.1-2 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xdfb03000-0xdfb033ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 23 at device 3.0 on pci4 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xdfb02000-0xdfb027ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipmi0: IPMI device rev. 1, firmware rev. 3.52, version 2.0, device support mask 0xbf ipmi0: Number of channels 2 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0uhub0: usbus1<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 CAM uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ada0: quirks=0x1<4K> ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ada1: quirks=0x1<4K> ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 GEOM_MIRROR: Device mirror/swap launched (2/2). uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus0 usbus1 uhub3: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 ukbd0 on uhub2 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 bridge0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP em1: link state changed to UP em0: link state changed to UP pflog0: promiscuous mode enabled ums0 on uhub2 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 em0: link state changed to DOWN bridge0: link state changed to UP em0: promiscuous mode enabled