Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-01-03 13:24:57
From: root
Description: FreeBSD/amd64 on Supermicro X9SCL/X9SCM
em0: promiscuous mode disabled bridge0: link state changed to DOWN em1: promiscuous mode disabled em1: link state changed to DOWN tap0: promiscuous mode disabled em0: promiscuous mode enabled bridge0: link state changed to UP em1: promiscuous mode enabled tap0: promiscuous mode enabled bridge0: link state changed to DOWN em1: link state changed to UP bridge0: link state changed to UP tun0: link state changed to UP tap0: link state changed to UP em0: promiscuous mode disabled em1: promiscuous mode disabled em1: link state changed to DOWN tap0: promiscuous mode disabled bridge0: link state changed to DOWN em0: promiscuous mode enabled bridge0: link state changed to UP em1: promiscuous mode enabled tap0: promiscuous mode enabled em1: link state changed to UP tun0: link state changed to DOWN tap0: link state changed to DOWN em1: link state changed to DOWN pflog0: promiscuous mode disabled em1: link state changed to UP pid 74141 (auth), jid 0, uid 0: exited on signal 3 (core dumped) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 4 2 1 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done All buffers synced. ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p3 GENERIC amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verbose)! sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verify)! module_register: cannot register cpu/ichss from kernel; already loaded from cpufreq.ko Module cpu/ichss failed to register: 17 module_register: cannot register cpu/powernow from kernel; already loaded from cpufreq.ko Module cpu/powernow failed to register: 17 module_register: cannot register cpu/est from kernel; already loaded from cpufreq.ko Module cpu/est failed to register: 17 module_register: cannot register cpu/hwpstate from kernel; already loaded from cpufreq.ko Module cpu/hwpstate failed to register: 17 module_register: cannot register cpu/p4tcc from kernel; already loaded from cpufreq.ko Module cpu/p4tcc failed to register: 17 CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3100.09-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1dbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8254013440 (7871 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1550045806 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4336] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 em0: <Intel(R) PRO/1000 Network Connection> port 0xf020-0xf03f mem 0xdfa00000-0xdfa1ffff,0xdfa25000-0xdfa25fff irq 20 at device 25.0 on pci0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xdfa24000-0xdfa243ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib2 em1: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xdf900000-0xdf91ffff,0xdf920000-0xdf923fff irq 16 at device 0.0 on pci2 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xdfa23000-0xdfa233ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 23 at device 3.0 on pci3 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xdfa22000-0xdfa227ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ichsmb0: <Intel Cougar Point SMBus controller> port 0x580-0x59f mem 0xdfa21000-0xdfa210ff irq 18 at device 31.3 on pci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 ipmi0: IPMI device rev. 1, firmware rev. 3.52, version 2.0, device support mask 0xbf ipmi0: Number of channels 2 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 Trying to mount root from ufs:/dev/mirror/gm0p3 [rw]... Root mount waiting for: usbus0 usbus1 CAM uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <TOSHIBA HDWD110 MS2OA8R0> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <TOSHIBA HDWD110 MS2OA8R0> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0 GEOM_MIRROR: Device mirror/gm0 launched (2/2). GEOM: mirror/gm0: the secondary GPT table is corrupt or invalid. GEOM: mirror/gm0: using the primary only -- recovery suggested. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus0 usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 ukbd0 on uhub3 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 mountroot: waiting for device /dev/mirror/gm0p3... lo0: link state changed to UP bridge0: Ethernet address: [_MAC_XXXXXXXXXX] tap0: Ethernet address: [_MAC_XXXXXXXXXX] em1: link state changed to UP ums0 on uhub3 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 tap0: promiscuous mode enabled bridge0: link state changed to DOWN pflog0: promiscuous mode enabled em0: promiscuous mode enabled em1: link state changed to DOWN em1: promiscuous mode enabled Accounting enabled