Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2022-01-10 00:43:46
From: yamori813
Description: Buffalo_WZR-HP-G300NH
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE yamori813_modify-n234676-f131d68e21fc Buffalo_WZR-HP-G300NH mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x8049d4c0.
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00530000 - 0x03ef6fff, 60583936 bytes (14791 pages)
avail memory = 59744256 (56MB)
arc4random: no preloaded entropy cache
hostuuid: using 00000000-0000-0000-0000-000000000000
wlan: <802.11 Link Layer>
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
null: <full device, null device, zero device>
[ath_hal] loaded
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1e5a40
gpiobus0: <GPIO bus> on gpio0
gpioiic0: <GPIO I2C> at pins 19-20 on gpiobus0
gpioiic0: SCL pin: gpiobus0:20, SDA pin: gpiobus0:19
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xa8
gpiobus0: <unknown device> at pins 9,11-12,14
gpioled0: <GPIO led> at pin 6 on gpiobus0
gpioled1: <GPIO led> at pin 17 on gpiobus0
gpioled2: <GPIO led> at pin 18 on gpiobus0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
arge0: arge_fetch_pll_config: pll_1000 = 0x1e000100
arge0: arge_attach: overriding MII mode to 'RGMII'
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null 
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: arge_fetch_pll_config: pll_1000 = 0x1e000100
arge1: arge_attach: overriding MII mode to 'RGMII'
arge1: Generating random ethernet address.
miiproxy0: <MII/MDIO proxy, MII side> on arge1
arge1: can't attach proxy
arge1: finishing attachment, phymask 0010, proxy null 
arge1: unable to attach PHY 4: 6
device_attach: arge1 attach returned 6
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
cfi0 at mem 0xbe000000-0xbfffffff on nexus0
cfi0: [256x128KB]
cfid0 on cfi0
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
ath0: unable to attach hardware; HAL status 8
Unimplemented nexus_teardown_intr at /usr/home/hiroki/freebsd-src/sys/mips/mips/nexus.c:511
device_attach: ath0 attach returned 6
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Device configuration finished.
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
GEOM: new disk cfid0
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/u-boot"
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/u-boot-env"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
MAP: cfid0: 60000x160000, data=0x160000 "/dev/map/kernel"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: cfid0: 1c0000x1e00000, data=0x1e00000 "/dev/map/rootfs"
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/ART"
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/properties"
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade"
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME