Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-01-22 12:25:34
From: peter
Description: FreeBSD/amd64 on
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p6 #0: Mon Jan 10 06:28:50 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (3200.18-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16551284736 (15784 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL DX79TO >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20201113/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20201113/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20201113/tbfadt-850)
ioapic1 <Version 2.0> irqs 24-47
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 3 2 5 6 4 7
KTLS: Initialized 8 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000062 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <INTEL DX79TO>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xeb300000-0xeb301fff irq 16 at device 0.0 on pci2
xhci0: 32 bytes context size, 32-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xea000000-0xeaffffff,0xe0000000-0xe7ffffff,0xe8000000-0xe9ffffff irq 16 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xeb000000-0xeb003fff irq 17 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> port 0x3040-0x305f mem 0xeb400000-0xeb41ffff,0xeb425000-0xeb425fff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xeb501000-0xeb5013ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xeb420000-0xeb423fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xeb200000-0xeb201fff irq 17 at device 0.0 on pci7
xhci1: 64 bytes context size, 32-bit DMA
usbus2: waiting for BIOS to give up control
usbus2: timed out waiting for BIOS
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
pcib8: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <serial bus, FireWire> at device 0.0 (no driver attached)
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xeb502000-0xeb5023ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x3068-0x306f,0x3074-0x3077,0x3060-0x3067,0x3070-0x3073,0x3020-0x303f mem 0xeb427000-0xeb4277ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
orm0: <ISA Option ROM> at iomem 0xd1800-0xd27ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC892 (Analog)> at nid 27 and 24,25,26 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 CAM
ugen0.1: <0x1033 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <0x1912 XHCI root HUB> at usbus2
uhub2 on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3 on usbus2
uhub3: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <SPCCSolidStateDisk SBFQE1.2> ACS-4 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD10EZEX-08WN4A0 01.01A01> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: pass1,ada1 in 'Slot 03', SATA Slot: scbus3 target 0
uhub1: 4 ports with 4 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus3
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x0024> at usbus3
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
Root mount waiting for: usbus1 usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x05e3 USB2.0 Hub> at usbus1
uhub6 on uhub4
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus1
uhub6: MTT enabled
Root mount waiting for: usbus1
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <vendor 0x04d9 RPI Wired Keyboard 5> at usbus1
ukbd0 on uhub6
ukbd0: <vendor 0x04d9 RPI Wired Keyboard 5, class 0/0, rev 2.00/1.50, addr 4> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus1
ugen1.5: <PixArt USB Optical Mouse> at usbus1
ichsmb0: <Intel Patsburg SMBus controller> port 0x3000-0x301f mem 0xeb428000-0xeb4280ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
nvidia0: <NVIDIA GeForce GT 710> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.86 Tue Oct 26 21:43:42 UTC 2021
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub6
uhid0: <vendor 0x04d9 RPI Wired Keyboard 5, class 0/0, rev 2.00/1.50, addr 4> on usbus1
ums0 on uhub6
ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 5> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0