Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2022-01-28 22:57:41
From: yamori813
Description: IOData_WN-AG450DGR
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE yamori813_modify-n234716-3c22b9770cbd IOData_WN-AG450DGR mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803a34b0.
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x0043c000 - 0x03ef1fff, 61562880 bytes (15030 pages)
avail memory = 60731392 (57MB)
arc4random: no preloaded entropy cache
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x00001c01
Processing 1 pin-config node(s) in pinctrl-0 for spi@b00
Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
pinctrl0: GPIO mode end  : 0x00001c5d
rstctrl0: <MTK Reset Controller> on ofwbus0
clkctrl0: <MTK Clock Controller> on ofwbus0
intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 7 on palmbus0
gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 10 on palmbus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <MTK GPIO Controller (v1)> mem 0x638-0x65b on palmbus0
palmbus0: no default resources for rid = 0, type = 1
gpio1: could not allocate resources for device
device_attach: gpio1 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
palmbus0: <timer@100> mem 0x100-0x11f irq 5 compat ralink,rt3883-timer (no driver attached)
palmbus0: <watchdog@120> mem 0x120-0x12f irq 6 compat ralink,rt3883-wdt (no driver attached)
palmbus0: <memc@300> mem 0x300-0x3ff irq 8 compat ralink,rt3883-memc (no driver attached)
palmbus0: <uart@500> mem 0x500-0x5ff irq 9 disabled compat ralink,rt3883-uart (no driver attached)
gpioc0: <GPIO controller> on gpio0
gpio1: <MTK GPIO Controller (v1)> mem 0x638-0x65b on palmbus0
palmbus0: no default resources for rid = 0, type = 1
gpio1: could not allocate resources for device
device_attach: gpio1 attach returned 6
palmbus0: <gpio@660> mem 0x660-0x683 disabled compat ralink,rt3883-gpio (no driver attached)
palmbus0: <gpio@688> mem 0x688-0x6ab disabled compat ralink,rt3883-gpio (no driver attached)
spi0: <MTK SPI Controller (v1)> mem 0xb00-0xb3f on palmbus0
spibus0: <OFW SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
palmbus0: <spi@b40> mem 0xb40-0xb9f disabled compat ralink,rt3883-spi (no driver attached)
uart0: <MTK UART Controller> mem 0xc00-0xcff irq 11 on palmbus0
uart0: console (58139,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
rt0: <Ralink RT3883 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq 0 on ofwbus0
rt0: RT305XF Ethernet MAC (rev 0x00000000)
rt0: use hardcoded [_MAC_XXXXXXXXXX] macaddr
rt0: bpf attached
rt0: Ethernet address: [_MAC_XXXXXXXXXX]
ofwbus0: <pci@10140000> mem 0x10140000-0x1015ffff irq 1 disabled compat ralink,rt3883-pci (no driver attached)
usbphy0: <MTK USB PHY> on ofwbus0
ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 2 compat ralink,rt3883-wmac (no driver attached)
ehci0: <MTK USB 2.0 Controller> mem 0x101c0000-0x101c0fff irq 3 on ofwbus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ohci0: <MTK USB Controller> mem 0x101c1000-0x101c1fff irq 4 on ofwbus0
usbus1 on ohci0
ohci0: usbpf: Attached
ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
rtmdio0: <FV built-in ethernet interface, MDIO controller> mem 0x10100000-0x1010ffff on ofwbus0
mdio0: <MDIO> on rtmdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
arswitch0: <Atheros AR8327 Ethernet Switch (ver 1 rev 2)> on mdio0
arswitch0: ar8327_fetch_pdata_port: port 0: speed=3, duplex=1, txpause=0, rxpause=0
arswitch0: ar8327_fetch_pdata_port: port 6: speed=3, duplex=1, txpause=0, rxpause=0
arswitch0: ar8327_fetch_pdata_pad: pad 0: mode=6, rxclk_sel=0, txclk_sel=0, txclk_delay_sel=1, rxclk_delay_sel=2, txclk_delay_en=1, rxclk_enable_en=1, sgmii_delay_en=0, pipe_rxclk_sel=0
arswitch0: ar8327_fetch_pdata_pad: pad 6: mode=6, rxclk_sel=0, txclk_sel=0, txclk_delay_sel=1, rxclk_delay_sel=2, txclk_delay_en=1, rxclk_enable_en=1, sgmii_delay_en=0, pipe_rxclk_sel=0
arswitch0: ar8327_phy_fixup: called; phy=0; chiprev=2
arswitch0: ar8327_phy_fixup: called; phy=1; chiprev=2
arswitch0: ar8327_phy_fixup: called; phy=2; chiprev=2
arswitch0: ar8327_phy_fixup: called; phy=3; chiprev=2
arswitch0: ar8327_phy_fixup: called; phy=4; chiprev=2
arswitch0: ar8327_atu_learn_default: TODO!
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0003, rev. 3
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0003, rev. 3
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0003, rev. 3
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0003, rev. 3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus4: <MII bus> on arswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00c82e, model 0x0003, rev. 3
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
etherswitch0: <Switch controller> on arswitch0
mdio1: <MDIO> on arswitch0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 250000000 Hz quality 800
Event timer "MIPS32" frequency 250000000 Hz quality 800
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
arswitch0port5: link state changed to DOWN
GEOM: new disk flash/spi0
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
Trying to mount root from cd9660:/dev/flash/spi0s.rootfsugen1.1: <MediaTek OHCI root HUB> at usbus1
uhub0: <MediaTek OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <MediaTek EHCI root HUB> at usbus0
uhub1: <MediaTek EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
.uzip []...
flash/spi0: slice 00000000-0002ffff: u-boot (191KB)
flash/spi0: slice 00030000-0003ffff: u-boot-env (63KB)
flash/spi0: slice 00040000-0016ffff: kernel (1215KB)
flash/spi0: slice 00160000-007fffff: rootfs (6783KB)
flash/spi0: slice 00040000-007fffff: upgrade (7935KB)
MAP: No valid partition found at flash/spi0
MAP: No valid partition found at flash/spi0s.u-boot
MAP: No valid partition found at flash/spi0s.u-boot-env
MAP: No valid partition found at flash/spi0s.kernel
MAP: No valid partition found at flash/spi0s.rootfs
MAP: No valid partition found at flash/spi0s.upgrade
MAP: No valid partition found at flash/spi0s.rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
start_init: trying /sbin/init
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
arswitch0: arswitch_miipollstat: port 1: port -> UP
arswitch0port2: link state changed to UP
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME